Résumé du contenu de la page N° 1
HP MR4000N HDTV Tuner
User’s Guide
Regulatory model: HSTND-3X01
Résumé du contenu de la page N° 2
The information in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE E
Résumé du contenu de la page N° 3
Important Safeguards WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: RISK OF ELECTRIC SHOCKS DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE SUFFICIENT REFER SERVICING TO QUAL
Résumé du contenu de la page N° 4
Important Safety Instructions • All operating and use instructions should be followed. • All warnings on the appliance and in the operating instructions should be adhered to. • The safety and operating instructions should be retained for future reference. • All the safety and operating instructions should be read before the appliance is operated. 1 Water and Moisture — The appliance should not be used near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet b
Résumé du contenu de la page N° 5
14 Nonuse Periods — The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15 Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 16 Damage Requiring Service — The appliance should be serviced by qualified service personnel when: a The power-supply cord or the plug has been damaged; or b Objects have fallen, or liquid has been spilled into the a
Résumé du contenu de la page N° 6
Résumé du contenu de la page N° 7
Table of Contents Safety.....................................................................................................................1 Introduction ............................................................................................................3 What’s in the Box .................................................................................................................................3 Setup ...........................................................................
Résumé du contenu de la page N° 8
Using the Lock Menu ...........................................................................................................................16 Using the Setup Menu .........................................................................................................................18 Screen format..................................................................................................................................18 4:3 ratio...................................................
Résumé du contenu de la page N° 9
Safety First: • Read all instructions before installing and operating the product. • Keep this User’s Guide in a safe place for future reference. • Observe all warnings in this User’s Guide. • Follow all instructions in this User’s Guide. • Do not use attachments that are not recommended by HP with this product. Use of inadequate attachments may result in damage to the product or personal injury. Installing the HP HDTV Tuner: WARNING: To reduce the risk of fire or electrical shock,
Résumé du contenu de la page N° 10
Precautions: DANGEROUS VOLTAGE: Do not attempt to repair your HDTV Tuner yourself. Removing the top cover of the HDTV Tuner may cause fire or electric shock. If any of the following conditions occur, unplug the HDTV Tuner from the wall and contact a qualified service professional: • The power cord or plug is damaged. • Liquid is spilled on the product, or objects have fallen into the product. • The product does not operate as described in the instructions. • The product has been da
Résumé du contenu de la page N° 11
Introduction The HP High-Definition Tuner receives digital high-definition and standard definition ATSC broadcasts right off of the air. A digital on-screen guide enables you to conveniently locate your favorite shows using an intuitive interface. DVI output enables the transmission of pure digital signal for the best ® picture available today. A digital coaxial link is also available, enabling Dolby Digital audio signals to be sent to an Audio receiver for pure and impressive sound. What’
Résumé du contenu de la page N° 12
Setup Rear Panel Connectors RF Input (labeled AIR 75 ohm) Connect an outdoor or indoor antenna. Monitor Out Connect composite cables to your TV or monitor. Insert the yellow video cable into the Video connector and the white and red cables into the Audio L and R connectors, respectively. Component Out Connect component cables to your TV or monitor. Insert the green, blue, and red video cables into the Y, Pb, and Pr connectors and the white and red cables into the Audio L and R connect
Résumé du contenu de la page N° 13
DTV Out Select (YPbPr/DVI) • Use YPbPr when you use the component connectors to a TV, monitor, or other video component input. This is compatible with resolution settings 1080i, 720p, and 480p. • Use DVI when you use the DVI connector to a TV, monitor, or other video component input. This is compatible with resolution settings 1080i, 720p, and 480p. DVI/RGB Out Use to connect a DVI input on an HDTV or monitor. Use a VGA-to-DVI adapter (not included) to connect a VGA monitor. NOTE: Not al
Résumé du contenu de la page N° 14
Connecting the HP HDTV Tuner This section explains how to connect your HP HDTV Tuner. It explains the following types of connections: • Connecting an indoor/outdoor antenna • Connecting to a TV with component connectors (YPbPr) • Connecting to an analog TV with composite connectors • Connecting to a PC monitor • Connecting audio equipment Connecting an indoor/outdoor antenna Connect your indoor or outdoor antenna to the RF Input (labeled AIR 75 ohm). If your antenna has separate lead
Résumé du contenu de la page N° 15
Connecting to an analog TV (composite) 1 Connect your indoor or outdoor antenna to the RF Input (labeled AIR 75 ohm). 2 Insert the yellow cable into the Video connector in the Monitor Out section. 3 Insert the white and red audio cables into the L and R Audio connectors of the Monitor Out section. 4 Insert the other end of the yellow cable into the Composite In connector of your TV. 5 Insert the other ends of the white and red audio cables into the L and R In connectors of your TV or audio
Résumé du contenu de la page N° 16
Using the HP HDTV Tuner Front Panel Controls • Power button: Press to turn the power on and off. • Menu button: Press to display the On-Screen Menu. • Power LED: A red light appears when the power is on. • Arrow and Enter buttons: Press to navigate the On-Screen Menu. • DTV LED: A green light appears when you are on a channel receiving a digital signal. • Info button: Press to display the following information: current HDTV Tuner settings, the channel number, captioning settings, the p
Résumé du contenu de la page N° 17
Using the Remote Control Identifying the remote control buttons Button Description Power Press Power once to turn the HDTV Tuner on or off. Number keys Use the keypad numbers (0–9) to directly select channels. Help Press when inside the On-Screen Menu. Displays a help window describing the current feature. Pre-CH Press Pre-CH (previous channel) once to recall the last channel. Fav-CH Press Fav-CH (favorite channel) once to view the next channel assigned as a favorite channel. MTS Pre
Résumé du contenu de la page N° 18
Installing or replacing the remote control batteries When the remote control becomes less responsive or unresponsive, the batteries are low. Insert two AAA non-rechargeable batteries into the remote control, and ensure that you match them to their proper polarities. 1 Push down the tab and pull back the cover on the back of the remote control. 2 Insert the batteries into the remote control, and make sure that you match polarities. 3 Close the cover. CAUTION: Use only the size and type o
Résumé du contenu de la page N° 19
Use the arrow buttons on the remote control to scroll through the programs listed in your guide. Highlighting a program gives you the following information: • Time the program begins and ends. • Channel the program is on. • Name of the program. • Closed captioning availability. • Format of the program broadcast (high definition or standard definition). • Language of the program. • TV rating or MPAA rating of the program. Using the On-Screen Menu The On-Screen Menu (OSM) provides an e
Résumé du contenu de la page N° 20
Using the Channel Menu To display the Channel menu, press the Menu button on your remote control, select (highlight) the Channel option, and press the Select button. Using auto memorizing to set up your channels Auto memorizing scans for a signal for all of the VHF and UHF channels in your area. If a signal is found, it adds the channel to your channel list. Follow these steps to set auto memorizing for your channels: 1 Press the Menu button on your remote control. 2 Highlight Channel, a
