Instruction d'utilisation Pelco C986M-A

Résumé du contenu de la page N° 1

®
RMA14
Rack Mount Kit
Installation/Operation Manual
Manual C986M-A (5/95)
1.0 WARNINGS 2.0 SCOPE
Prior to installation and use of this product, the following The information within this manual covers the installa-
WARNINGS should be observed. tion of the RMA14 Rack Mount Kit.
1. Installation and servicing should only be done by Installation should be in accordance with all applicable
Qualified Service and Installation Personnel. local and national electric codes, utilizing approved
materials o

Résumé du contenu de la page N° 2

4.0 SPECIFICATIONS 1. Assemble the rack as shown in Figure 2 using the supplied hardware. Dimensions: See Figure 1 Construction: 16-gauge steel While assembling, install all hardware loosely un- Weight: 8 lbs 12 oz. til all components are attached and then finish by tightening all hardware. 5.0 INSTALLATION 2. Set the monitor into the rack, aligning the four (4) The RM14 rack kit is supplied unassembled. The fol- feet with the holes in the base plate. lowing hardware is provided for use in ass

Résumé du contenu de la page N° 3

Figure 2. RMA14 Rack Kit Assembly PELCO Manual C986M-A (5/95) 3

Résumé du contenu de la page N° 4

6.0 WARRANTY AND RETURN INFORMATION WARRANTY RETURNS Pelco will repair or replace, without charge, any merchandise proved In order to expedite parts returned to the factory for repair or credit, please defective in material or workmanship for a period of one year after the date call the factory at (800) 289-9100 or (559) 292-1981 to obtain an of shipment. authorization number (CA number if returned for credit, and RA number if returned for repair). Exceptions to this warranty are as noted below: