Instruction d'utilisation Premier Mounts Low Profile Flat Wall Mount LPFM1532

Résumé du contenu de la page N° 1

INSTALLATION INSTRUCTIONS
LPFM1532
Universal Low Profile Flat Mount for 15” to 32” Flat Panels
EUROPE
NORTH AMERICA
3130 East Miraloma Avenue
Swallow House,
Anaheim, CA 92806 USA
Shilton Industrial Estate,
USA and Canada –
Shilton, Coventry, England CV79JY
Phone: 800-368-9700
Phone: +44 (0) 2476 614700
Fax: 800-832-4888
Fax: +44 (0) 2476 614710
Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2009
9531-201-001-02

Résumé du contenu de la page N° 2

LPFM1532 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 4 Concrete Surface Installation 5 Determining the Mounting Hardware 6 Universal Spacers 6 Cover Plate Installation 7 Adapter Plate Installation 7 Cover Plate Installation with Adapter Plates Attached (Optional) 8 Flat Panel Installation 9 Technical Specifications 10 Warranty

Résumé du contenu de la page N° 3

LPFM1532 Parts List Congratulations on the purchase of your new Premier Mounts LPFM1532 flat panel mount. This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800) 368-9700. Adapter Plate (Qty 2) Cover Plate (Qty 1) Wall Plate (Qty 1) M4 x 10mm Combo M4 x 16mm Combo M4 x 20mm Comb

Résumé du contenu de la page N° 4

LPFM1532 Wood Stud Installation Prior to installation, the two (2) M6 x 75mm Phillips head locking screws must be removed. These two screws are located on the bottom of the LPFM1532. Visual Centering Diamond - The visual centering diamond will allow you to determine the center of the wood stud. It will also allow you to determine the exact center for the flat panel placement on the wall. The visual centering diamond will work in conjunction with the visual stud guide. Visual

Résumé du contenu de la page N° 5

Solid Surface Cinder Block LPFM1532 Concrete Surface Installation You will have four (4) mounting holes when installing into concrete. Step 1. Use the visual centering diamond to help determine the placement of the back plate. Step 2. Once the mounting placement has been determined, use a pencil to mark the mounting points. Step 3. Drill the mounting holes using a 1/8” drill bit where the pencil marks have been made. 1/8” Bit Pilot Hole Step 4. Place the #10 anchor into the hole a

Résumé du contenu de la page N° 6

LPFM1532 Determining the Mounting Hardware Step 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel. Step 2. Using a pencil, mark the depth of the thread insert on the thread depth indicator (Figure 2). Step 3. Compare and verify the depth of the remaining thread inserts. Step 4. Locate the correct diameter screw for the thread insert. Step 5. Compare your thread depth indicator marking to the screw length. If your selected screw is long

Résumé du contenu de la page N° 7

LPFM1532 Cover Plate Installation Mounting Hardware Slotted Opening Cover Plate Securing Screw Mounting Hardware Mounting Point Universal Spacer Flat Panel Step 1. Secure the cover plate to the flat panel Recessed VESA 75mm/100mm Pattern using four (4) Phillip screws (supplied). Universal spacer stacking is Step 2. The slotted opening must be facing up limited to five (5) spacers max for and the flat surface touching the flat each mounting screw. panel surface. Step 1. If you have a

Résumé du contenu de la page N° 8

LPFM1532 Step 2. Insert four (4; two on each side) M6 x 8mm screws. Tighten using a long Phillips head screwdriver. Phillips Head Screwdriver Cover Plate Installation with Adapter Plates Attached (Optional) 200 x 200 Installation LPFM1532 LPFM1532 Mounting Mounting Hardware Stacked Universal Hardware Spacers Page 8 Installation Instructions

Résumé du contenu de la page N° 9

Solid Su fac r e Cinder Block Solid Surface Cinder Block LPFM1532 200 x 100 Installation LPFM1532 Stacked Universal Mounting Mounting Hardware Spacers Hardware Flat Panel Installation Mounting Slot Mounting Tab M6 x 75mm Phillips Head Screws Screwdriver The cover plate mounting slot must be facing up. Step 1. Lower the flat panel onto the wall plate so that the mounting tab is inserted into the Step 2. Secure the two plates by inserting and mounting slot. tightening two (2) M6 x 75m

Résumé du contenu de la page N° 10

LPFM1532 Technical Specifications All measurements are in inches [mm]. B B Please refer to the hardware pack that is included with the LPFM1532 to determine the correct mounting C C hardware for your application. A A A D D NOTE: A. 200 X 100 VESA Pattern M4 x 10mm Phillips Flat Head screws only. B. 200 X 200 VESA Pattern If an M4 is to be used for location B, an M4 washer must be used as well. D D A C. 1

Résumé du contenu de la page N° 11

LPFM1532 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective