Instruction d'utilisation JBL GTO17T

Résumé du contenu de la page N° 1

GRAND
®
TOURING
SERIES
GTO17T
tweeter
owner’s
manual
THANK YOU
®
for purchasing a JBL GTO17T automotive
tweeter. We’ve organized this manual to make
your installation as simple and trouble-free
as possible. Please read it thoroughly before
proceeding. Remember to keep your sales
receipt and this manual in a safe place so
both are available for future reference.
English

Résumé du contenu de la page N° 2

SPEAKER PLACEMENT INSTALLATION WARNINGS AND TIPS ABOUT THESE LOUD MUSIC AND HEARING INSTALLATION TIPS ABOUT PLACEMENT INSTRUCTIONS Playing loud music in an automobile can • Always wear protective eyewear when Figures 1 through 3 show possible speaker Installation of automotive stereo permanently damage your hearing, as well using any tools. placements, with Figure 1 being more components can require extensive as hinder your ability to hear traffic. The • Turn off all audio components and other de

Résumé du contenu de la page N° 3

TWEETER INSTALLATION SURFACE-MOUNT Figures 7A through 7D. The Starfish™ Figure 7B. Flush-mounted to surface tweeter mount is intended to be used behind grille panel. Figure 4. Surface-mounting the tweeter BLACK (–) when the tweeter will be installed behind a and connecting the crossover. (–) SMALL LUG factory grille (e.g., replacing the factory tweeter behind a door panel). The Starfish BLACK will allow you to mount the component RED (+) BLACK (–) tweeter directly to the panel itself or to the ar

Résumé du contenu de la page N° 4

SPECIFICATIONS GTO17T 1" Tweeter Power Handling, RMS 50W* Power Handling, Peak 150W* Sensitivity (2.83V/1m) 92dB Frequency Response 2.5kHz – 21kHz Impedance 2 Ohms Mounting Depth 3/4" (19mm) Cutout Diameter 1-7/8" (48mm) * With enclosed filter General Care The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones. A valid serial number is required for warranty coverage. Features, specifications and appearance are subject to ch