Résumé du contenu de la page N° 1
6782-13000 (906)
OWNER/OPERATOR MANUAL
LONG REACH TRIMMER
LRT2300
Thank you for purchasing a RedMax
WARNING
product.
Before using our trimmer, please read
The engine exhaust from this product
contains chemicals known to the State this manual carefully to understand the
of California to cause cancer, birth proper use of your unit.
defects or other reproductive harm.
Résumé du contenu de la page N° 2
Read this manual carefully to understand all safety precautions, controls, proper operation and maintenance of your RedMax long reach trimmer. Failure to do so could result in serious injury. SAFETY FIRST Instructions contained in warnings within this manual and warning seals marked with a symbol on the long reach trimmer concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructi
Résumé du contenu de la page N° 3
CONTENTS SAFETY PRECAUTIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 OPERATOR WORKING CONDITION AVOID NOISE PROBLEM AVOID CHANCES OF DAMAGE WARNING LABELS SPECIFICATIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8 SET UP · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9 FUEL · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10 FUEL MIX MIXING FUEL FUELING OPERATION · · ·
Résumé du contenu de la page N° 4
INFORMATION This machine is equipped with an Overload Cancellation Mechanism. When the cutting blades have got into metal wires or those twigs difficult to cut, the mechanism acts as a shock absorber, and protects the drive gears and the blades from severe reaction which could give damage to those parts. When the blades are frequently caught by twigs, please check the following points: 1. Size of the twigs. NEVER TRY TO CUT TWIGS THICKER THAN 3/16”. 2. Condition of the blade edges. REPLACE T
Résumé du contenu de la page N° 5
Safety Precautions ■ In order to ensure proper and safe • Avoid running the engine indoors. The operation of your trimmer exhaust gases contain harmful carbon monoxide. •Read this long reach trimmer Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury. •Never use your trimmer under circumstances like those described below: 1.When the ground is slippery or when • Be sure to keep this manual han
Résumé du contenu de la page N° 6
Safety Precautions ■ Work gear and clothing ■ Warnings considering handling of fuel •When using your trimmer, always be sure • The engine of the RedMax® trimmer is to wear strong, durable, work clothing; designed to run on a mixed fuel which shirts should be long-sleeved shirts and contains highly flammable gasoline. This pants should be full-length pants reaching fuel is highly flammable and you should down to the ankles. never store cans of fuel or refill the tank of the trimmer in any place
Résumé du contenu de la page N° 7
Safety Precautions ■ Things to check before using your ■ Things to check before starting up the trimmer engine •Before beginning work, look around •Take a careful look around to make sure carefully to get a feel for the shape of the that no obstacles exist within a perimeter of land, the trees, hedges, or bushes to be 15 feet or less around the trimmer before trimmed, and whether or not there are any starting the engine. obstacles which might get in the way while working, and remove any obstacle
Résumé du contenu de la page N° 8
Safety Precautions ■ Things to be careful about when using These metallic parts reach high your trimmer temperatures during operation and doing •When using your trimmer, grip the handles so could result in serious burns. of the trimmer firmly with both hands, place •When you finish trimming in one location your feet slightly apart (slightly further apart and wish to continue work in another spot, than the width of your shoulders) so that turn off the engine, place the protective your weight is d
Résumé du contenu de la page N° 9
Safety Precautions ■ Handling of warning labels (Part number : 6782-13250) Handling this machine improperly could result in accidents causing serious injury or death. Read this manual carefully and practice using the trimmer until you are fully acquainted with all operations and have learned Keep hands away from cutting blades to use it correctly. Always be careful to wear a face protector and helmet Carefully read owner’s manual when using your trimmer. Where to apply ■ Taking care of warning l
Résumé du contenu de la page N° 10
Specifications MODEL LRT2300 Overall size ( L x W x H ) 92.9 x 9.6 x 8.7 in Dry Weight w/o shoulder strap 13.2 lbs Engine Type Air cooled 2-stroke gasoline engine Model ZENOAH G23L Displacement 22.5 cc Max. output Fuel Mixture (Gasoline 32 : Oil 1) Carburetor Walbro Diaphragm type Spark Plug Champion RJ6CY Transmission Centrifugal clutch, spiral bevel gear, cam crank Reduction ratio 4 : 1 Cutting head Type Reciprocating Double blade Tooth 28 teeth Pitch 30 Effective cut width 16 in Angle adjus
Résumé du contenu de la page N° 11
Set up ■ MOUNTING ENGINE ■ CONNECTING THE SWITCH CORD 1. Remove the clamp temporarily attached to WARNING the clutch housing. 2.Push the driveshaft toward the gearcase • Insert the end of the cord firmly. An and rotate it by hand to check that the improper connection may result in the driveshaft is engaged with the gears. cord becoming loose during operation 3. Insert the shaft tube into the clutch or in causing the engine to fail to stop housing until it bottoms. When difficult to even after th
Résumé du contenu de la page N° 12
Fuel 32:1 MIXING CHART WARNING GASOLINE gal. 1 2345 • Gasoline is very flammable. Avoid 2-CYCLE OIL fl.oz 4 8 12 16 20 smoking or bringing any flame or sparks near fuel. Make sure to stop the •These engines are certified to operate engine and allow it cool before on unleaded gasoline. refueling the unit. Select outdoor bare ground for fueling and move at least ■ MIXING FUEL 3m(10ft) away from the fueling stop 1.Measure out the quantities of gasoline and before starting the engine. oil t
Résumé du contenu de la page N° 13
Operation ■ STARTING ENGINE NOTE IMPORTANT Avoid pulling the rope to its end or returning 1. Rest the unit on a flat, firm place. Keep it by releasing the knob. Such actions can the cutting head off the ground and clear of cause starter failures. surrounding objects as it will start rotating 6.When the engine has started, move the upon starting of the engine. choke lever gradually downward to open 2.Pump the primer until fuel flows out in the the choke clear tube. 7.Allow the engine to warm up
Résumé du contenu de la page N° 14
Operation ■ Adjusting the angle of the cutting blades WARNING 1. Stop the trimmer engine. •This product is equipped with extremely 2.Turn the bolt located on the top of the sharp blades, and when used trimming mechanism counter-clockwise improperly these blades can be to loosen it. extremely dangerous, and improper 3.Adjust the angle of the blades to the handling can cause accidents which desired angle, and then fix the bolt may in turn lead to serious injury or firmly back into place. death. F
Résumé du contenu de la page N° 15
Maintenance WARNING •Always be sure to stop the engine before inspecting the trimmer for problems or performing maintenance. • Never alter the trimmer or take the engine apart. •When replacing parts, always be sure to use only ZENOAH products or products which have been certified by ZENOAH for use with the RedMax trimmer. •Things to check before using trimmer ■ Be sure to check the following before using your trimmer. Item to be checked Response 1 Trimming mechanism • See if attachment is loose
Résumé du contenu de la page N° 16
Maintenance ■ BLADES ■ GEAR CASE •When refilling the tank or resting, it is often The inside of the gear case should be a good idea to use the time to oil the lubricant using ZENOAH-approved lubricant cutting blades. after every 20 hours of use. • If a gap exists between the upper and lower When adding lubricant, use a grease gun to blades, follow the procedure below to insert lubricant into the three grease nipples adjust them so that they fit more closely located on the gear case. together. 1.
Résumé du contenu de la page N° 17
Maintenance ■ FUEL FILTER WARNING •A clogged fuel filter may cause poor acceleration of the engine. Check •Make sure that the engine has stopped periodically to see if the filter is clogged and is cool before performing any with dirt. The filter can be taken out of the service to the trimmer. Contact with fueling port using a small wire hook. moving cutting head or hot muffler may Disconnect the filter assembly from the fuel result in a personal injury. pipe and unhook the retainer to disassembl
Résumé du contenu de la page N° 18
Maintenance ■ INTAKE AIR COOLING VENT ■ PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE WARNING 1.Remove the muffler, insert a screwdriver •Never touch the cylinder, muffler, or into the vent, and wipe away any carbon spark plugs with your bare hands buildup. Wipe away any carbon buildup immediately after stopping the engine. on the muffler exhaust vent at the same The engine can become very hot when time. in operation, and doing so could result in severe burns. • When checking the trim
Résumé du contenu de la page N° 19
Maintenance ■ MUFFLER ■ SPARK ARRESTER • The muffler is equipped with a spark WARNING arrester to prevent red hot carbon from •Inspect periodically, the muffler for loose flying out of the exhaust outlet. Periodically fasteners, any damage or corrosion. If any inspect and clean as necessary with a wire sign of exhaust leakage is found, do not brush. In the State of California it is use the trimmer and have it repaired required by law (Section 4442 of the immediately. California Public Resources
Résumé du contenu de la page N° 20
Parts List : LRT2300 Fig.1 TRIMMER GROUP 18
