Instruction d'utilisation Lucent Technologies 8101M

Résumé du contenu de la page N° 1

S
8101, 8101M, 8102M, 8103, 8104, 8110M and 8111
Telephones Quick Reference
Special Features:
Adjunct
Data jack Data jack
Adjunct power jack
(equipment)
The FLASH Button — press the FLASH button instead of pressing
(on 8102M and
Positive
jack
the switchhook for features such as Conference with business
8104 only)
Disconnect
PROGRAM PAUSE Pause button communications systems, and for custom calling features if you are
Program
(on 8101 and
Routing
Pulse/Tone using your telephone at home.
8103 o

Résumé du contenu de la page N° 2

Service 4 To program another programmable dialing button, repeat Steps 2 IMPORTANT SAFETY INSTRUCTIONS AUTO ANSWER (For 8110M and 8111 Users) and 3. 1 Before cleaning, unplug the telephone from the modular wall jack. Do The most careful attention has been devoted to quality standards in the 5 Press the PROGRAM button to exit. not use liquid cleaners or aerosol cleaners. Use a damp cloth for The Auto Answer Button, only on the 8110M and 8111, can be used manufacture of your new telephone. Sa

Résumé du contenu de la page N° 3

Labeling and Installing the Programmable Dialing Button Using Adjunct Equipment With The 8102M or 8104 INSTALLING YOUR TELEPHONE Wall Installation Designation Card Note: The installation of adjunct equipment (such as the S201A Note: The following installation procedures are applicable for all of Use the following directions to mount the telephone on a standard 1 Remove the plastic cover, which fits over the designation card, by Speakerphone or 500A Headset Adapter) with the 8102M or 8104 the

Résumé du contenu de la page N° 4

FCC REGISTRATION AND REPAIR INFORMATION • Where the telephone equipment requires ac power, plug the tele- to be connected to a telephone loop which is used by To program the HOLD button as an alternate feature such as Call phone into a different ac outlet so that the telephone equipment and the device, to prevent overloading. The termination on Park Your new Lucent Technologies telephones have been registered with the a loop may consist of any combination of devices receiver are on different b