Résumé du contenu de la page N° 1
13 MEMORY ADJUSTABLE JUMBO
DISPLAY CALLER ID TELEPHONE
MODEL PH-5560
OPERATING INSTRUCTIONS
• CALLER ID SHOWS YOU CALLER’S NAME & NUMBER
81 NAME & NUMBER CALLER ID MEMORY
•
• TONE/PULSE SWITCHABLE DIALING
• AUTOMATIC TIME & DATE DISPLAY
ONE-TOUCH CALLER ID CALL BACK
•
• 3 ONE-TOUCH SPEED DIAL BUTTONS
• 10 TWO-TOUCH SPEED DIAL MEMORY LOCATIONS
• WALL/DESK USABLE
• REQUIRES 4 “AA” BATTERIES (NOT INCLUDED)
TO USE THE CALLER ID FEATURES OF THIS PHONE, YOU MUST
SUBSCRIBE TO CALLER ID SERVICE FROM YOU
Résumé du contenu de la page N° 2
TABLE OF CONTENTS Important Safety Instructions 1 Important Telephone Company & FCC Information 2 Location of Controls 3 Getting Started Step 1: Checking the Package Contents 4 Step 2: Powering the Phone 4 Step 3: Telephone Installation 5 Step 4: Setting up the Telephone 5,6 Basics Choosing Tone or Pulse Dialing 6 Making and Receiving Calls 7 Volume Control and Ringer Setting 7 Last Number Redialing and Pause Function 7 Flash Functio
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following: 1. Read and follow all instructions and warnings. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly dampened cloth only. 3. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink
Résumé du contenu de la page N° 4
IMPORTANT TELEPHONE COMPANY & FCC INFORMATION CAUTION : TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY, DO NOT OPEN CABINET. WE SUGGEST THAT YOU REVIEW THE FOLLOWING INFORMATION PROVIDED BY THE FCC (FEDERAL COMMUNICATIONS COMMISSION). FCC REGISTRATION This telephone set is registered with the FCC based upon compliance with Part 68 of its rules. Connection of this telephone to the nationwide telecommunications network must be through a standard network jack (RJ11W or RJ11C) whic
Résumé du contenu de la page N° 5
LOCATION OF CONTROLS 4 5 3 6 2 7 1 8 9 10 13 12 11 14 20 15 19 16 17 18 1. COMFORTABLE HANDSET - for comfortable use even during long calls. 2. HANDSET VOLUME CONTROL - adjusts the volume of handset receiver. 3. NEW CALL INDICATOR - flashes when new calls have come in. 4. CALL BACK BUTTON- used for calling back from the caller ID list. 5. DELETE BUTTON - erases an individual record or all records from the Caller ID Memory, also used to accept time, date, and area code during initial setup. 6. JU
Résumé du contenu de la page N° 6
GETTING STARTED Step 1: Checking the Package Contents Your new PH-5560 jumbo display Caller ID telephone has all the features of a 13 memory telephone plus Caller ID display functions. As you unpack this set, make sure you have the following items in the package.
Résumé du contenu de la page N° 7
GETTING STARTED Step 3: Telephone Installation HANDSET CONNECTING THE TELEPHONE 1. Connect the handset coiled cord to the HANDSET REAR OF THE and the left side of the phone. WALL TELEPHONE JACK 2. Connect the straight telephone line cord to the LINE CORD jack (rear of phone) and telephone outlet on the wall. If your telephone outlet is not modular, contact your telephone company for assistance. (If you want to mount the telephone on the wall, see Wall Mounting on pages 11 & 12.) ATTACHING THE B
Résumé du contenu de la page N° 8
GETTING STARTED Step 4: Setting up the Telephone(continued) SETTING UP LCD CONTRAST, LANGUAGE, AREA CODE, TIME AND DATE 3. Repeat steps 1 and 2 above to set the 2nd and 3rd digits of your area code. AREA CODE EXAMPLE: 718 NOTE: At any time during setup, you may just pick up the handset to dial or receive a call. NOTE: If you make a mistake, you can just do it over again or call customer service for help. Your phone will now go to the Time and Date mode, press the UP and DOWN buttons to get to th
Résumé du contenu de la page N° 9
BASICS Making and Receiving Calls MAKING A CALL 1. Pick up the handset to get a dial tone. The hook icon will show in the display. . 2. Dial the phone number. The dialed number appears in the display. 3. When you finished talking, replace the handset into the base. RECEIVING A CALL 1. Pick up the handset when the phone rings. The hook icon will show in the display. . 2. After a few seconds, the Count Up Call Timer will start. 3. When you finished talking, replace the handset into the base. N
Résumé du contenu de la page N° 10
TELEPHONE FEATURES Memory Dialing You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons or 10 two-touch speed dial memories. STORING PHONE NUMBERS INTO MEMORY 1. Press the STORE button. (short for programming) appears in the display. . 2. Dial the phone number you want to store. You can store up to 22 digits (including a TONE ( TONE ) and a PAUSE (REDIAL/PAUSE), each of which is counted as one digit). 3. For 3 one-touch dialing: For 10 two-touch dialing: Pre
Résumé du contenu de la page N° 11
CALLER ID FEATURES Understanding the Caller ID Service Caller ID allows the caller’s phone number to be shown in the display between the first and the second ring of the call, also in most cases, the caller’s name, and calling time and date. This information will be stored automatically. In order to use this feature, you must first subscribe to Caller ID service. To use the call back feature, be sure to enter your area code (see pages 5 & 6), and press the CALL BACK button for correct digits. Wh
Résumé du contenu de la page N° 12
CALLER ID FEATURES Calling back from the Caller ID List A. When the Handset is on the Base. 1. Display the phone number you want to call back using the UP or DOWN button. 2. Press the CALL BACK button. the display will show “PICKUP OR ADJ”. 3. If the phone number is 7-digit (local call), phone number displayed is 7-digit, if you want the phone number to be 10-digit (area code + phone number) or 11-digit (1 + area code + phone number), press the CALL BACK button once or twice more. 4. If the phon
Résumé du contenu de la page N° 13
CALLER ID FEATURES Deleting the Data from the Caller ID List (continued) To delete ALL the Caller ID memories 1. When the phone is not in use, press the DELETE button and hold for 3 seconds, the display shows “DEL ALL CALLS?” 2. Press the DELETE button once more, the display changes to “ NO CALLS ” and all the Caller ID memories (including the new call memories) are deleted. NOTE: The new call indicator will flash when there are new calls in the caller ID memory. It will be off when all new call
Résumé du contenu de la page N° 14
WALL MOUNTING (continued) Wall Mounting without a Modular Wall Phone Plate Follow these instructions to mount the phone on the wall without a wall plate: Drill one hole 1. Locate a wall stud. If it is possible to utilize a wall stud for mounting, dry wall expanders or a similar type fastener is recommended. Consult your local hardware stores for details. Make sure space 15 2. Drill 2 holes 3 /16" (100 mm) apart. between holes is 100 mm 3 3. Put a screw into each hole and leave / " (5mm) 16 of
Résumé du contenu de la page N° 15
TROUBLE SHOOTING PROBLEMS CHECK The Caller ID unit will not function until you have subscribed the Caller ID service from your local telephone company. Call your local telephone company to have Caller ID service installed on your phone line. Check your phone line connections. Also, The Caller ID display does not fresh batteries MUST be installed. Make sure all your show the caller’s information phone line connections are secure and corrected. If it is a private call or a blocked call, t
Résumé du contenu de la page N° 16
TROUBLE SHOOTING (continued) PROBLEMS CHECK You picked up the phone before the second ring, or your phone received unclear call appears in the display information. Static can cause this message. If this condition persists, contact your local telephone company to ensure that there is no problem with your phone line. To erase ALL call records, make sure the phone is not in use, press the DELETE button and Cannot erase all records in memory hold for 3 seconds, the display will show “DEL ALL CALLS?
Résumé du contenu de la page N° 17
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 1 year after purchase, and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase sales slip with the set. During the initial 1 year period after original purchase, we will service the set that is returned to LENOXX ELECTRONICS CORP., prepaid, at no charge. After the initial 1 ye
