Résumé du contenu de la page N° 1
2-9315
Speakerphone
with 12-Number Memory
User’s Guide
We bring good things to life.
Résumé du contenu de la page N° 2
FCC Registration Information Your GE telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68, FCC Rules and Regulations. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determinin
Résumé du contenu de la page N° 3
INTRODUCTION Your GE speakerphone is designed to give you flexibility in use, and high quality performance. To get the most from your new telephone, we suggest that you take a few minutes right now to read through this instruction manual. The first section shows you how to install and set up the phone; next, it discusses speakerphone functions, followed by a section describing all of the phone features. If you have any questions or problems, consult the Table of Contents, the Troubleshooting Gui
Résumé du contenu de la page N° 4
PARTS CHECKLIST Your package should contain the following items: 12 MEMORY SPEAKERPHONE 1 6 2 7 3 8 4 9 AREA CODE PHONE NUMBER 5 EMERGENCY QUICK DIAL FLASH STORE REDIAL MEM DIAL ABC DEF 1 2 3 GHI4 JKL5 MNO 6 PRS TUV WXY 7 8 9 OPER TONE * 0 # MUTE HOLD SPEAKER Handset cord Phone line cord Handset Base unit INSTALLATION AND SET UP Your GE Speakerphone can be placed on a desk or tabletop, or can be mounted on the wall. After you decide which type of installa- tion you want, refer to the appropriate
Résumé du contenu de la page N° 5
Installing the 9V battery Installation of a 9V battery is optional, however when installed, the battery provides better performance for the speakerphone. 1 Remove the plastic cover over the 12 MEMORY SPEAKERPHONE 1 6 telephone memory directory. 2 7 3 8 4 9 AREA CODE 5 EMERGENCY QUICK DIAL 2 Open the battery compartment door using the flat edge of a screwdriver. 3 Insert a 9V battery (not included). 4 Close the battery door. 5 Replace the plastic cover over memory directory. 12 MEMORY SPEAKERPHON
Résumé du contenu de la page N° 6
DESK OR TABLETOP INSTALLATION Plug the telephone line cord into a modular jack (RJ11C or RJ14C) and into the PHONE Plug the handset cord into LINE jack on the the handset, and into the back of the unit. telephone jack on the left side of the unit. 12 MEMORY SPEAKERPHONE 1 6 2 7 Adjust the 3 8 4 9 AREA CODE PHONE NUMBER 5 EMERGENCY QUICK DIAL RINGER volume FLASH STORE REDIAL switch to the MEM DIAL desired setting. 1 ABC2 DEF 3 GHI JKL MNO 4 5 6 PRS TUV WXY 7 8 9 OPER TONE * 0 # MUTE HOLD SPEAKER
Résumé du contenu de la page N° 7
PUSH TO RELEASE PUSH TO RELEASE BASE PLATE PUSH TO RELEASE PUSH TO RELEASE BASE PLATE WALL MOUNT INSTALLATION The Speakerphone can be mounted on a wall phone plate (not included). 12 MEMORY SPEAKERPHONE 1 6 2 7 PUSH TO PUSH TO RELEASE RELEASE 3 8 Remove the Base 4 9 THIS END UP FOR DESK USE AREA CODE PHONE NUMBER 5 EMERGENCY QUICK DIAL Plate from the back BASE PLATE FLASH STORE REDIAL by pressing down on the snap tabs located at the top, and then Rotate the handset hook. lifting it off. Plug the
Résumé du contenu de la page N° 8
WALL MOUNT INSTALLATION CONTINUED Set the PULSE/TONE Set the RINGER VOLUME switch to TONE if you use switch as desired. Touch-Tone service; set it to PULSE if you have rotary service. 12 MEMORY SPEAKERPHONE 1 6 2 7 3 8 4 9 AREA CODE PHONE NUMBER 5 EMERGENCY QUICK DIAL FLASH STORE REDIAL MEM DIAL Plug the handset cord into the ABC DEF 1 2 3 handset and into the unit, and then GHI4 JKL5 MNO 6 hang up the phone. PRS TUV WXY 7 8 9 * OPER # TONE 0 MUTE HOLD SPEAKER USING THE SPEAKERPHONE SPEAKERPHONE
Résumé du contenu de la page N° 9
SPEAKERPHONE USE Note the following guidelines when using the speakerphone: • The speakerphone works similar to a two-way radio in that you can only listen or talk at one time. • Stay reasonably close to the phone so that you can be clearly heard by the person to whom you are talking. • You can adjust the speaker volume by sliding the VOLUME control on the right side of the base unit. • The speakerphone indicator light comes on when the speakerphone is in use. MAKING A CALL 1 Press the SPEAKER
Résumé du contenu de la page N° 10
USING THE FEATURES VOLUME CONTROLS Control the volume of both the handset and the speakerphone: • Use the VOLUME control to adjust speakerphone volume. • Use the RECEIVER volume control to adjust the handset volume. TEMPORARY TONE FEATURE If you have Pulse (rotary) service, and want to access customer calling services that require Tone dialing, such as getting informa- tion from a local bank, you can use this feature. 1 Press the TONE button ( * ) after you have connected to the service to enabl
Résumé du contenu de la page N° 11
REDIAL BUTTON Redial the last number you called by pressing the REDIAL button after you get a dial tone. NOTE: The Redial feature holds in memory the last phone number you dialed (as many as 32 digits). If you pressed any numbers after dialing the phone number, (for example, when accessing a voice-menu system) those numbers also are redialed. HOLD BUTTON Use the HOLD button to interrupt a phone conversation without hanging up, and then pick up the conversation again on the same phone or any exte
Résumé du contenu de la page N° 12
STORING A NUMBER IN MEMORY EMERGENCY QUICK DIAL 1 Press SPEAKER (or pick up the handset). STORE 2 Press STORE. 2 MEM DIAL 3 Dial the number 4 to be stored (up to 16 digits). 4 Press MEM DIAL. ABC DEF 1 2 3 5 Press a Memory Location GHI JKL MNO 6 4 5 (1-9 on the keypad), or an 5 3 PQ WX EMERGENCY QUICK DIAL TUV RS YZ 7 8 9 button. OPER TONE * 0 # 6 Press SPEAKER (or hang up the handset). SPEAKER 7 Record the phone number on 6 1 the memory directory (located under the plastic cover). STORING THE
Résumé du contenu de la page N° 13
DIALING A NUMBER FROM MEMORY You can dial numbers from memory when using the handset or speakerphone. When you get a dial tone, press the MEM DIAL button followed by the memory location (1-9) for the number you want to dial. CAUTION: If you make test calls to emergency numbers, remain on the line and explain the reason for the call. Also, make these calls in off-peak hours, such as early morning or late evening. DIALING THE EMERGENCY QUICK DIAL NUMBERS To dial one of these numbers, just press it
Résumé du contenu de la page N° 14
TROUBLESHOOTING GUIDE Problem Solution No dial tone. • Check hook switch to make Won't dial out sure it pops up. • Make sure speakerphone indicator comes on (if using speakerphone.) • Make sure TONE/PULSE is set to correct position. • Unplug the phone, wait 30 seconds, and plug the phone back in. Phone doesn’t ring • Check RINGER VOLUME. • Could have too many phones on one line. (See FCC registration information regarding REN) Low handset or • Check the volume settings (see p. 8). speaker volume
Résumé du contenu de la page N° 15
CARE AND MAINTENANCE To keep your GE telephone working and looking good, follow these few simple guidelines: • Avoid putting the phone near heating appliances and devices that generate electrical noise. (i.e., motors, fluorescent lamps.) • Phone should not be exposed to direct sunlight or moisture. • Avoid dropping the handset and other rough treatment. • Clean telephone with a soft cloth. (Remember to first unplug the phone from the wall outlet.) • Never use a strong cleaning agent or abrasiv
Résumé du contenu de la page N° 16
SERVICE FCC requires this product be serviced only by the manufacturer or its authorized service agents. In accordance with FCC require- ments, changes or modifications not expressly approved by Thomson Consumer Electronics could void the user’s authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this guide or call customer service, telephone number: 800-448-0329. Attach your sales receipt to the booklet for future reference or jot down
Résumé du contenu de la page N° 17
INDEX dialed 10 Symbols Modular jack 2 9V battery installation 3 MUTE button 8 B P Battery Safety Precautions 3 Phone Cord Wrap 4 E Pulse (rotary) service 8 PULSE/TONE switch 4, 6 Emergency Quick Dial buttons 10 R F RECEIVER volume control 8 FLASH button 8 REDIAL button 9, 10 RINGER VOLUME switch 4, 6 H S HOLD button 9 SPEAKER button 7 I speakerphone performance 6 Installation 4-6 Speakerphone use 7 Switching between speaker- M phone and handset 7 Memory Diali
Résumé du contenu de la page N° 18
WARRANTY What does your warranty cover? • Any defect in material or workmanship. For how long after the original purchase? • One year. • The warranty for rental units begins with the first rental. What will we do? • Provide you with a new, or at our option, a refurbished unit. • The exchange unit is warranted for the remainder of your product’s original one-year warranty period. How do you make a warranty claim? • Properly pack your unit. Include any cables, etc., which were originally provided
