Résumé du contenu de la page N° 1
2M46-04R/2M46-04RDC
SmartSwitch 2000
User’s Guide
HSIM 2 HSIM 1
PWR
CPU
RESET
1 2
2M46-04R COM
2314 00
9032363-02
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Only qualified personnel should perform installation procedures. NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or software described in this manual is subject to change without notice. IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR A
Résumé du contenu de la page N° 4
Notice INDUSTRY CANADA NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
Résumé du contenu de la page N° 5
Notice CABLETRON SOFTWARE PROGRAM LICENSE 1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this package subject to the terms and conditions of this License Agreement. You may not copy, reproduce or transmit any part of the Program except as permitted by the Copyright Act of the United States or as authorized in writing by Cabletron. 2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the Program. 3. APPLICABLE LAW. This
Résumé du contenu de la page N° 6
Notice SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS THE FE-100F3 FAST ETHERNET INTERFACE MODULE, FPIM-05 AND FPIM-07 FDDI PORT INTERFACE MODULES, AND APIM-29 ATM PORT INTERFACE MODULE USE CLASS 1 LASER TRANSCEIVERS. READ THE FOLLOWING SAFETY INFORMATION BEFORE INSTALLING OR OPERATING THESE MODULES. The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation limits. This control loop eliminates the need for maintenance checks or adjustments. The
Résumé du contenu de la page N° 7
Notice DECLARATION OF CONFORMITY Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: Cabletron Systems, Inc. Manufacturer’s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representative Name: Mr. J. Solari European Representative Address: Cabletron Systems Limited Nexus House, Newbury Business Park London Road, Newbury Berkshire RG13 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC EC Dir
Résumé du contenu de la page N° 8
Notice vi 2M46-04R/2M46-04RDC User’s Guide
Résumé du contenu de la page N° 9
CONTENTS CHAPTER 1 INTRODUCTION 1.1 Using This Guide......................................................................... 1-1 1.2 Structure of This Guide................................................................ 1-1 1.3 2M46-04R Overview.................................................................... 1-2 1.3.1 Connectivity .................................................................... 1-3 1.3.2 Full Duplex Switched Ethernet........................................ 1-
Résumé du contenu de la page N° 10
CONTENTS CHAPTER 4 TROUBLESHOOTING 4.1 Using LANVIEW...........................................................................4-1 4.2 FE-100TX LED.............................................................................4-4 4.3 Troubleshooting Checklist............................................................4-6 4.4 Using the RESET Button .............................................................4-7 CHAPTER 5 LOCAL MANAGEMENT 5.1 Overview .........................................
Résumé du contenu de la page N° 11
CONTENTS 5.11 Device Specific Configuration Menu Screen ............................. 5-37 5.12 System Resources Screen........................................................ 5-39 5.12.1 Setting the Reset Peak Switch Utilization..................... 5-41 5.13 High Speed Interface Configuration Menu Screen.................... 5-42 5.14 High Speed Interface Configuration Screen.............................. 5-44 5.14.1 Configuring an FE-100FX or FE-100F3 in Port 1 or 2 .....................
Résumé du contenu de la page N° 12
CONTENTS APPENDIX B FE-100TX, FE-100FX, AND FE-100F3 SPECIFICATIONS B.1 FE-100TX.................................................................................... B-1 B.2 FE-100FX.................................................................................... B-2 B.3 FE-100F3 .................................................................................... B-3 APPENDIX C OPTIONAL INSTALLATIONS AND MODE SWITCH BANK SETTINGS C.1 Required Tools.....................................
Résumé du contenu de la page N° 13
CHAPTER 1 INTRODUCTION Welcome to the 2M46-04R/04RDC SmartSwitch 2000 User’s Guide. This guide describes the 2M46-04R and 2M46-04RDC SmartSwitch 2000 devices and provides information concerning network requirements, installation, troubleshooting, and the use of Local Management. The 2M46-04R and 2M46-04RDC have identical features and NOTE functions with the exception of their power source connection. The 2M46-04R connects to an ac power source and the 2M46-04RDC conn
Résumé du contenu de la page N° 14
Chapter 1: Introduction Appendix A, Specifications, contains information on functionality and operating specifications, connector pinouts, environmental requirements, and physical properties. Appendix B, FE-100TX, FE-100FX, and FE-100F3 Specifications, contains information about FE-100TX pinouts and information concerning cable types used with the FE-100FX and FE-100F3. Appendix C, Optional Installations and Mode Switch Bank Settings, describes how to install optional Fast Ethe
Résumé du contenu de la page N° 15
2M46-04R Overview The 2M46-04R is a tabletop unit that can be installed in a standard 19-inch rack using the supplied rack mounting hardware. The 2M46-04R has two ac power supplies. The power supplies load share 50% (+/-5%) of the power required by the device. If one power supply fails, the remaining power supply assumes the entire load of the device without interruption to network traffic. Each power supply module supports its own ac input connection, which allows the user to connect
Résumé du contenu de la page N° 16
Chapter 1: Introduction 1.3.3 Auto-Negotiation The optional FE-100TX Fast Ethernet Interface Module can auto-negotiate the type of connection required to provide a link to another device. During Auto-Negotiation, two devices automatically exchange information “telling” each other what their operating capabilities are. The Auto-Negotiation feature targets the maximum capabilities that can be reached between the two devices. For example, a 2M46-04R FE-100TX Fast Ethernet Inte
Résumé du contenu de la page N° 17
2M46-04R Overview 1.3.5 Runtime IP Address Discovery This feature enables the 2M46-04R to automatically accept an IP address from a BootP server on the network into NVRAM without requiring the user to enter an IP address through Local Management. When the 2M46-04R is connected to the network and powered up, Runtime IP Address Discovery (RAD) checks the 2M46-04R for an IP address. If one has not yet been assigned, RAD checks to see if any of the 2M46-04R interfaces have a link. If so,
Résumé du contenu de la page N° 18
Chapter 1: Introduction 1.3.7 Switching The 2M46-04R provides traditional switching (802.1D), IEEE 802.1Q switching, or SecureFast Switching (SFS) Virtual Network Services between all of the optional Fast Ethernet Interface Modules and High Speed Interface Modules (HSIMs). SFS and 802.1Q switching allow for migration to Virtual Network technologies without requiring the replacement of existing equipment. 1.3.8 Standards Compatibility The optional Fast Ethernet Interface Modules
Résumé du contenu de la page N° 19
2M46-04R Overview 1.3.11 Optional Features Options for the 2M46-04R include Fast Ethernet Interface Modules and High Speed Interface Modules to add uplink capability. Cabletron Systems provides Fast Ethernet Interface Modules to support uplinks to 100 Mbps Ethernet backbones or high speed connections to local servers. The Fast Ethernet Interface Modules are listed in Table 1-1. . Table 1-1 Fast Ethernet Interface Modules P/N Description Application Uses RJ45 Supports Category 5 Unsh
Résumé du contenu de la page N° 20
Chapter 1: Introduction 1.4 DOCUMENT CONVENTIONS The following conventions are used throughout this document: Note symbol. Calls the reader’s attention to any item of NOTE information that may be of special importance. Tip symbol. Conveys helpful hints concerning procedures or TIP actions. Caution symbol. Contains information essential to avoid damage to the equipment. ! CAUTION Electrical Hazard Warning symbol. Warns against an action that could result in personal injury or
