Résumé du contenu de la page N° 1
May 2010
KVT415A-R2
KVT417A-R2
KVT419A-R2
ServTray
Control your 4-post rack- or cabinet-mounted USB
®
BL A CK BOX
or PS/2 server with the compact, easy-to-use
ServTray.
Includes a keyboard, mouse, LCD panel, and KVM module housed
in an industry-standard 19" 1U-height rack drawer.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing address: Black
Résumé du contenu de la page N° 2
ServTray Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, whi
Résumé du contenu de la page N° 3
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. T odas las instrucciones de operación y uso deben ser seguidas. 5. El aparato
Résumé du contenu de la page N° 4
ServTray Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Centronics is a registered trademark of Centronics Corporation. PS/2 is a registered trademark of International Business Machines Corporation. UL is a registered trademark of Underwriters Laboratories Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. We‘re here to help! If you have any questions about your a
Résumé du contenu de la page N° 5
Table of Contents Table of Contents Chapter Page 1. Specifications ......................................................................................................................................................................................6 2. Overview .............................................................................................................................................................................................7 2.1 Introduction ..........................
Résumé du contenu de la page N° 6
ServTray 1. Specifications Active Display Area: KVT415A-R2: 9"H x 12"W (22.8 x 30.4 cm); KVT417A-R2: 10.6"H x 13.3"W (27 x 33.8 cm); KVT419A-R2: 11.8"H x 14.8"W (30.1 x 37.6 cm) ® Approvals: CE, FCC for the product; UL , TUV, CE for power supply Backlight Unit: KVT415A-R2: 2 CCFLs edge-light (top/bottom); KVT417A-R2, KVT419A-R2: 4 CCFLs edge-light (top/bottom) Brightness (cd/m^2): 250 (center) Contrast Ratio (typical): KVT415A-R2: 350:1; KVT417A-R2: 450:1; KVT419A-R2: 500
Résumé du contenu de la page N° 7
Chapter 2: Overview 2. Overview 2.1 Introduction ™ Each ServTray Kit includes a ServTray (KVT415A-R2, KVT417A-R2, or KVT419A-R2), a KVM module (KVT4S1UV, KVT4S8PV, KVT4S8UV, KVT4S16PV, or KVT4S16UV), and a Universal Rear Mounting Bracket Extension Kit. This manual describes how to use the ServTray and the Universal Rear Mounting Brackets, and a separate manual (included with your kit) explains how to use the KVM module. ® Control your 4-post-rack- or cabinet-mounted USB or PS/2 server with th
Résumé du contenu de la page N° 8
ServTray Accessories that you might or will need to purchase include: • 12-24 or 10-32 nuts/bolts (you might need these to mount the KVM tray in the rack/cabinet) 2.3 Universal Rear Mounting Brackets Figure 2-2 shows the rear bracket pair, and Figures 2-3 and 2-4 show the ServTray in its maximum and minimum extension positions. Figure 2-2. Rear bracket pair. NOTE: The lengths in Figures 2-3 and 2-4 are the depths measured between the front pole and rear pole inside a 4-post rack or cabinet,
Résumé du contenu de la page N° 9
Chapter 3: Assembly and Installation 3. Assembly and Installation 1. Choose a proper position in the cabinet for the rack drawer. 2. Using eight counter-sunk screws (included), attach the extensions (included with your ServTray kit) to both sides of the KVM switch module. See Figures 3-1 through 3-5. The wide-edged plastic extension should be on the top side (see Figure 3-5). Rear brackets Extensions Figure 3-1. Rear brackets and extensions. KVM module (4) counter-sunk screws Extensions Figu
Résumé du contenu de la page N° 10
ServTray Extension on side Switch module of switch module Figure 3-4. KVM switch module with extensions attached. NOTE: Unit may appear KVTS1UV different based on ordering options. The wide-edged plastic extension should be on the top side. Figure 3-5. Back view of module with extensions attached. Page 10 724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Résumé du contenu de la page N° 11
Chapter 3: Assembly and Installation 3. Remove the safety stopper from the console drawer (see Figure 3-6). The safety stopper keeps the drawer from sliding out during transportation. Console drawer Safety stopper Figure 3-6. Locating and removing the safety stopper. WARNING: After the safety stopper is removed, the drawer may slide out when tilted. This could cause serious injury; keep the drawer assembly level to avoid this. 4. Slide the rear bracket into both sides of the unit. Make sure
Résumé du contenu de la page N° 12
ServTray 5. U se four 10-32 or 12-24 screws (not included) to fasten the console drawer onto the front brackets. (See Figure 3-8.) The metal brackets shown in the figure support the console’s rear side. Rear bracket Front bracket Front bracket Console drawer Figure 3-8. Securing the console drawer to the cabinet’s front brackets. 6. Push the KVM switch module evenly towards the drawer. See Figure 3-9. Figure 3-9. Pushing the module towards the drawer. Page 12 724-746-5500 | blackbox.com 724
Résumé du contenu de la page N° 13
Chapter 3: Assembly and Installation 7. Slide out the console drawer. Push the KVM module evenly toward the drawer and secure both units using the attached thumbscrews. See Figure 3-10. Thumbscrews (permanently attached to the tray) KVM module Console drawer Figure 3-10. Securing the KVM module to the console drawer. 8. Make sure the Centronics connectors on the KVM module and attached cable are firmly mated. See Figure 3-11. 5 ⁄16" (8 mm) Centronics connector on cable Figure 3-11. Centro
Résumé du contenu de la page N° 14
ServTray 11. Once the ServTray is installed in the 4-post rack or cabinet, you can connect it to a computer. The KVM module’s connectors attach to the KVM connectors on a PS/2 CPU via the 3-in-1 (PS/2, PS/2, VGA) Cable (included) or they connect to the HD15 and keyboard/mouse connectors on a USB CPU via the 2-in-1 (USB, VGA) Cable (included). Both cables are shown in Figure 3-12. 3-in-1 Cable (included) This side connects to HD15 male HD15 female the computer/server. connector connector
Résumé du contenu de la page N° 15
Chapter 4: Operation 4. Operation Once the ServTray is installed and connected to a PS/2 or USB CPU or ServSwitch, it’s ready for operation. Control the unit via the buttons on the LCD panel (labeled 1 and 2 in Figure 4-1) and the LCD panel power switch (labeled 3 in Figure 4-1). Monitor the status via the keyboard status indicators (labeled 4, 5, and 6 in Figure 4-1). 3 1 2 2 1 4 5 6 Figure 4-1. The ServTray’s components. 1. Use the LCD panel menu buttons (1 in Figure 4-1) to activate the OSD
Résumé du contenu de la page N° 16
ServTray 5. Troubleshooting 5.1 Calling Black Box If you determine that your ServTray is malfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500 or info@blackbox.com. Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate assistance if you have a complete description, including: • the nature and duration of the problem. • when the problem oc
Résumé du contenu de la page N° 17
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 20 seconds or less. © Copyright 2
