Résumé du contenu de la page N° 1
KV9612A
KV9614A
ServSwitch DT Series USB/DVI/Audio KVM Switches
Control up to two or four PCs, or G3/G4 Mac or Mac Pro computers
®
from a single console (USB keyboard, USB mouse, and DVI [Digital Visual
BL A C K B OX
Interface] monitor, plus audio).
Share two peripherals between two or four computers.
Include a built-in hub.
Customer Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •
Support FREE technical support 24 hours a day, 7 days a week: Call 724-7
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
FCC and NOM Statements FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interf erence to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15
Résumé du contenu de la page N° 4
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches 5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc. 6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante. 7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante. 8. Servicio—El usuario no debe intentar d
Résumé du contenu de la page N° 5
NOM Statement 17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación. 18. Servicio por personal calificado deberá ser provisto cuando: A: El cable de poder o el contacto ha sido dañado; u B: Objectos han caído o líquido ha sido derramado dentro del aparato; o C: El aparato ha sido expuesto a la lluvia; o D: El aparato par ece no operar normalmente o muestra un cambio en su desempeño; o E: El aparato ha s
Résumé du contenu de la page N° 6
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches TRADEMARKS USED IN THIS MANUAL Black Box, the Double Diamond logo, and ServSwitch are trademarks or regis- tered trademarks of BB Technologies, Inc. Linux is a registered trademark of Linus Torvalds. IntelliMouse, Microsoft, Windows, Windows NT, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac is a registered trademark of Apple Computer, Inc. A
Résumé du contenu de la page N° 7
Table of Contents Chapter Page 1. Specifications ..............................................................................................6 2. Overview ..............................................................................................7 2.1 Introduction ........................................................................................7 2.2 Features ..............................................................................................7 2.3 Components .......
Résumé du contenu de la page N° 8
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches 1. Specifications Hotkeys: Yes Resolution: 1920 x 1200 @ 60 Hz ® Supported Operating Systems: Windows 98 SE/Me/2000/XP, Windows ® ® ® Vista , Mac OS X, Linux User Controls: KV9612A: (1) port button; KV9614A: (4) port buttons (labeled 1–4) also used for Scan time buttons and AutoScan, (1) function button Connectors: Both models: (1) Power; KV9612A: Console end: (1) DVI-I, (4) USB Type A, (2) 3.5
Résumé du contenu de la page N° 9
Chapter 2: Overview 2. Overview 2.1 Introduction ™ The 2- or 4-Port ServSwitch USB/DVI/Audio KVM Switch enables you to con- trol up to two or four PCs, or G3/G4 Mac or Mac Pro computers from a single console (USB keyboard, USB mouse, and DVI [Digital Visual Interface] monitor, plus audio). You can use it to share two peripherals—plus a keyboard and ® ® mouse—among up to four computers. It supports Microsoft IntelliMouse and other mice. Setup is fast and simple, and no configuration software
Résumé du contenu de la page N° 10
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches 2.3 Components 2.3.1 KV9612A Front Panel Figure 2-1 shows the 2-Port ServSwitch DT Series front view. Table 2-1 describes the components numbered in the illustration. 1 3 2 2 3 Figure 2-1. The 2-Port ServSwitch DT Series front-panel view. Table 2-1. KV9612A front panel components. No. Component Description 1 Port selection button Press button to select a computer. 2 Port LEDs T he right LEDs light to show the port that is curren
Résumé du contenu de la page N° 11
Chapter 2: Overview 2.3.2 KV9612A Rear Panel Figure 2-2 shows the 2-Port ServSwitch rear view. Table 2-2 describes the com- ponents numbered in the illustration. 7 6 4 9 10 9 5 8 8 Figure 2-2. The 2-Port ServSwitch back-panel view. Table 2-2. KV9612A rear-panel components. No. Component Description 4 Power connector Connects to a 9–12-VDC, 1.5-A power supply. 5 Console USB Type A Keyboard and mouse ports for console. ports Also two ports for peripherals. 6 Console DVI port Attaches
Résumé du contenu de la page N° 12
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches 2.3.3 KV9614A Front Panel Figure 2-3 shows the 4-Port ServSwitch DT Series front view. Table 2-3 describes the components numbered in the illustration. 3 5 4 1 2 Figure 2-3. The 4-Port ServSwitch DT Series front-panel view. Table 2-3. KV9614A front-panel components. No. Component Description 1, 2 Port selection buttons Press buttons 1–4 individually to select a com- puter. 1 Scan time buttons Press buttons 1 and 2 together to chan
Résumé du contenu de la page N° 13
Chapter 2: Overview 2.3.4 KV9614A Rear Panel Figure 2-4 shows the 4-Port ServSwitch rear view. Table 2-4 describes the com- ponents numbered in the illustration. 8 9 10 10 12 10 11 11 10 11 7 11 6 Figure 2-4. The 4-Port ServSwitch back-panel view. Table 2-4. KV9614A rear-panel components. No. Component Description 6 Power connector C onnects to a 9–12-VDC, 1.5-A power supply. 7 Console USB Type A Keyboard and mouse ports for console. ports Also two ports for peripherals. 8 Console DVI p
Résumé du contenu de la page N° 14
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches 2.4 What’s Included The package should contain the following items. If anything is missing or dam- aged, please contact Black Box. • 2- or 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switch • Universal power supply, output: 9–12 VDC, 1.5 A • Foot pad • This user’s manual 2.5 What You’ll Need to Supply • DVI monitor • USB enabled computer • Microphone and speaker • USB keyboard • USB mouse • K V9612A: 2-Port ServSwitch DT Series USB/
Résumé du contenu de la page N° 15
Chapter 3: Installation 3. Installation PC BIOS NOTE: The following BIOS setup changes are required for PC users but not required for Mac users. 1. I n STANDARD CMOS, set HALT ON ERROR to ALL BUT KEYBOARD. 2. In PNP and PCI SETUP, set PNP OS INSTALLED to YES and set USB IRQ to ENABLED. NOTE: The KV9612A and KV9614A are set to switch USB keyboard and mouse signals from one computer to another. If you plan to share other periph- erals such as a CCD camera, printer, or scanner, you must shut
Résumé du contenu de la page N° 16
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches 3.2 Hardware Installation This section provides instructions for the basic hardware setup of a single ServSwitch. CAUTION: Before you begin, make sure that power is turned off to all the devices that you will be connecting. To prevent damage caused by ground potential differences, make sure that all devices are properly grounded. If you don’t follow these instructions, your computers and/or the ServSwitch could be damaged. 3
Résumé du contenu de la page N° 17
Chapter 3: Installation Monitor Mouse Keyboard Microphone Speakers Figure 3-2. KV9614A: console keyboard, mouse, monitor, and audio connections. NOTES: T he monitor connected to the DVI-I port must be able to synchronize with the computer’s video signal. If you are uncertain about the moni- tor type, consult the monitor user’s manual. 3.2.2 Connecting the Computers Using the all-in-one DVI cable (EHN900024U-0006 or -0010), connect a com- puter to the ServSwitch. Connect the cable’s USB connec
Résumé du contenu de la page N° 18
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches ServSwitch cable USB computer Figure 3-3. KV9612A: computer connection. ServSwitch cable USB computer Figure 3-4. KV9614A: computer connection. 3.2.3 Initial Power On After connecting the ServSwitch, power on the computers. The ServSwitch will get enough power to operate from the computers. Page 16 724-746-5500 | blackbox.com
Résumé du contenu de la page N° 19
Chapter 4: Operation 4. Operation 4.1 Powering Up the System Once all cables have been connected and all computers have been powered on, the ServSwitch emulates mouse and keyboard signals on each port, allowing your computer to boot normally. The ServSwitch is now ready for use. 4.2 Selecting Computers Using Front-Panel Buttons You can instantly select any computer by pressing the port selection button(s) on the front panel. The corresponding LED lights when the port is selected. 4.3 Selectin
Résumé du contenu de la page N° 20
2- and 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switches Table 4-1 (continued). Hotkey commands. Key Sequence Function Left-Ctrl + Left-Ctrl + F3 To adjust Scan Rate, this command sets the duration before switching to the next computer in AutoScan. The 4-Port ServSwitch DT Series generates 1 to 4 beeps, indicating a scan interval of 3, 8, 15, and 30 seconds respectively. Left-Ctrl + Left-Ctrl + F5 Audio Stick: You can link an optional multime- dia module to the back of each K
