Instruction d'utilisation Aprilaire 1213

Résumé du contenu de la page N° 1

Models 1213 & 1413
Upgrade Kit for Media Air Cleaners
Installation Instructions
WARNING CAUTION
1. Read instructions thoroughly before beginning installation.
Sharp edges may cause injury from
2. Do not install the upgrade kit in a location where the media will be
cuts. Use caution when handling
in direct exposure to UV light. UV lights will cause degradation of the
sheet metal.
fi ltering media.
APPLICATION
Fits all Model 2400 air cleaners and
Model 2200 air cleaners produced after 1985

Résumé du contenu de la page N° 2

INSTALLATION 1. IMPORTANT: Turn the thermostat mode to OFF and fan to AUTO. 90-1385 2. Snap frame supports into frame base as shown – eight (8) places. Make sure the support slides in and hits the center rail of the frame base. 90-1379 3. Remove the door from the air cleaner. Inner housing 4. Remove and discard the inner housing assembly. assembly 90-1380 2

Résumé du contenu de la page N° 3

5. Align the assembled Upgrade Kit frame with the filter rails in the air cleaner housing and slide the frame completely into the air cleaner. Filter rail in housing 90-1381 6. Bend the appropriate locking tab to lock the frame into place at the top and bottom. NEW STYLE MODEL 2400 & ALL 2200s OLD STYLE MODEL 2400 7. For “New Style” Model 2200 and 2400 air cleaners (see illustration at right), press the Styrofoam door liner into the center of the door. For “Old Style” air cleaners, the d

Résumé du contenu de la page N° 4

8. Apply the door label to the front of the door as shown. Label placement Label placement Label placement Label placement MODEL 2400 OLD STYLE MODEL 2400 NEW STYLE MODEL 2200 OLD STYLE MODEL 2200 NEW STYLE 90-1383 9. Install the media into the Upgrade Kit frame using the directions on the filtering media sleeve to ensure the media is in the correct orientation; the outlet side of the media is the expanded metal side. 90-1384 10. Install the air cleaner door. 11. Return the thermostat mode a