Résumé du contenu de la page N° 1
AT-DC2552XS
L2 Data Center Switch
Installation Guide
613-001760 Rev. A
Résumé du contenu de la page N° 2
Copyright © 2013 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorporated. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesis, Inc. reserves the right to make changes in specifications and other informa
Résumé du contenu de la page N° 3
Electrical Safety and Emissions Standards This product meets the following standards. U.S. Federal Communications Commission Radiated Energy Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy a
Résumé du contenu de la page N° 4
Translated Safety Statements Important: The indicates that translations of the safety statement are available in the PDF document “Translated Safety Statements” posted on the Allied Telesis website at www.alliedtelesis.com. 4
Résumé du contenu de la page N° 5
Contents Preface................................................................................................................................................................................11 Document Conventions ................................................................................................................................................12 Contacting Allied Telesis ...............................................................................................................
Résumé du contenu de la page N° 6
Contents Chapter 6: Managing the Switch .................................................................................................................................... 69 Local Management ...................................................................................................................................................... 70 Connecting the Console Port .............................................................................................................................
Résumé du contenu de la page N° 7
Figures Figure 1: AT-DC2552XS Front Panel View ..........................................................................................................................19 Figure 2: AT-DC2552XS Rear Panel....................................................................................................................................20 Figure 3: SFP+ Slot LEDs ........................................................................................................................................
Résumé du contenu de la page N° 8
Figures 8
Résumé du contenu de la page N° 9
Tables Table 1: Twisted Pair Cable Specifications for the NET MGMT Port ..................................................................................22 Table 2: SFP+ Slot LED ......................................................................................................................................................23 Table 3: QSFP+ LED ....................................................................................................................................................
Résumé du contenu de la page N° 10
Tables 10
Résumé du contenu de la page N° 11
Preface This guide contains instructions on how to install the AT-DC2552XS L2 Data Center Switch and the associated power supply and fan modules on a desktop or in a 19” equipment rack. This preface contains the following sections: “Document Conventions” on page 12 “Contacting Allied Telesis” on page 13 11
Résumé du contenu de la page N° 12
Preface Document Conventions This document uses the following conventions: Note Notes provide additional information. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data. Warning Warnings inform you that performing or omitting a specific action may result in bodily injury. 12
Résumé du contenu de la page N° 13
Stack Installation Guide for AT-2552XS L2 Data Center Switch Contacting Allied Telesis If you need assistance with this product, you may contact Allied Telesis technical support by going to the Support & Services section of the Allied Telesis web site at www.alliedtelesis.com/support. You can find links for the following services on this page: 24/7 Online Support — Enter our interactive support center to search for answers to your product questions in our knowledge database, to check supp
Résumé du contenu de la page N° 14
Preface 14
Résumé du contenu de la page N° 15
Chapter 1 Overview This chapter contains the following sections: “AT-DC2552XS Features” on page 16 “LEDs” on page 23 “Console Port” on page 29 “AT-PWR06 Power Supply Module” on page 30 “AT-FAN06 Fan Module” on page 32 15
Résumé du contenu de la page N° 16
Chapter 1: Overview AT-DC2552XS Features The AT-DC2552XS L2 Data Center Switch has a high-density switching fabric (1280 Gbps) in a compact 1 RU chassis. The switch’s functions and physical description are described in the following sections: AT-DC2552XS A list of the AT-DC2552XS switch’s functions is as follows: Functions Ports You will find the following network and management ports on the AT-DC2552XS: 48 SPF+ slots 4 QSFP+ slots 1 Console port (USB) 1 NET MGMT port (RJ-45) System C
Résumé du contenu de la page N° 17
Stack Installation Guide for AT-2552XS L2 Data Center Switch Installation Options The AT-DC2552XS L2 Data Center Switch is designed to be installed in one of two ways: On a desktop. In a 19-inch equipment rack. Power Supply/Fan Modules The AT-DC2552XS must have two fan modules and at least one power supply module installed. You may elect to install a second power supply module for redundancy. The power supply and fan modules are: AT-PWR06 power supply module AT-FAN06 fan module Note T
Résumé du contenu de la page N° 18
Chapter 1: Overview Optional QSFP+ Transceivers The following QSFP+ transceivers direct attach cable assemblies have been approved by Allied Telesis and may be installed in the AT-DC2552XS chassis: Note The QSFP+ transceivers and direct attach cable assemblies are sold separately from the AT-DC2552XS L2 Data Center Switch. Contact your local Allied Telesis representative for more information. AT-QSFPSR (40GBASE-SR4 (MPO)) QSFP+ Direct Attach Cables - AT-QSFP1CU (QSFP + Direct Attach Cabl
Résumé du contenu de la page N° 19
Stack Installation Guide for AT-2552XS L2 Data Center Switch AT-DC2552XS The AT-DC2552XS L2 Data Center Switch physical description is as follows: Physical Description AT-DC2552XS Front Panel The front panel of the AT-DC2552XS is shown in Figure 1 on page 19. Blank Covers Fan 1 LED [Top of Chassis] Fan 2 LED PS 1 FAN 1 FAN 2 PS 2 Slot Slot Slot Slot Figure 1. AT-DC2552XS Front Panel View Blank Covers - When the switch is shipped from the factory, four blank covers are installed. - Two bla
Résumé du contenu de la page N° 20
Chapter 1: Overview Note The AT-PWR06 power supply module is sold and packaged separately from the AT-DC2552XS L2 Data Center Switch. The fan module slots (FAN 1/FAN 2) are for the installation of the AT-FAN06 fan module. These slots are located on the center right and center left of the chassis. Two AT-FAN06 fan modules are required in the chassis for normal operation of the switch. Refer to “Installing and Replacing AT- FAN06 Fan Module” on page 52 for the installation procedure. Note
