Résumé du contenu de la page N° 1
of t
of and
Re:connect
M300 / M301
Video switch
Dominating Entertainment.
Revox of Switzerland.
Résumé du contenu de la page N° 2
M300/ M301 Re:connect Contents Video switch 2 Installation 2 M300 - SCART 3 M301 – RCA plug 3 Video switch principle 4 Connection options 5 Connection format 6 Format ⇔ Quality 7 Video format 7 Monitor connection panel 8 SCART output features 8 Parallel operation 8 Video switch operation 9 Selecting the video source 9 Selecting the recording source 9 Free selection of listening source 10 Modifying source names 10 Edit function 11 Restoring standard names 13 Technical
Résumé du contenu de la page N° 3
M300/ M301 Re:connect Video switch Installation In order to be able to work There are two versions of the comfortably with the wealth of video switch, which are multimedia devices that are differentiated from each other available, the video and audio by the connector panel that signals need to be controlled connects the video switch with intelligently. The M300 and the M51. M301 Video switch from REVOX offers you this comfort in some impressive ways. M300 It can receiv
Résumé du contenu de la page N° 4
M300/ M301 Re:connect M300 SCART version M301 RCA plug version The M300 is connected to the You will need two RCA stereo M51 DVD MKII module using a pairs for the video signals and fully switched, 21-pin SCART two RCA stereo pairs for the cable as shown in the figure audio signals to connect the below. The SCART cable M301 with the M51 DVD RCA delivered with the M51 fulfils module. these requirements perfectly. Additionally, the M301 and the M51 are connected with a Important
Résumé du contenu de la page N° 5
M300/ M301 Re:connect Video switch principle Essentially, the M300/ M301 Additionally; you have the video switch is a set of external option of recording audio and connections where different video signals with the video video output and different sources 1 and 2 (shown below recording devices can be by the arrows), e.g. using a connected. video recorder or video server. Connecting a video switch adds an additional 6 video sources (Video 1...6) to the M51 Source
Résumé du contenu de la page N° 6
M300/ M301 Re:connect Connection options The figure below gives you an In order to make this possible, overview of the connection there must either be a SCART options that the M300 and/ or connection to the television or M301 offer. the TV audio output must be connected to the Audio IN on the monitor field on the The audio signal from the video M300/M301 with a stereo RCA sources attached is transmitted cable. by the M51 whereas the picture signal is handled by the video
Résumé du contenu de la page N° 7
M300/ M301 Re:connect Connection formats In detail, the following connections can be made with the video sources 1 - 6: Connection Video Format Audio Format Input Output Input Output YC YC Analogue stereo Analogue stereo Video 1 CVBS CVBS YC YC Analogue stereo Analogue stereo Video 2 CVBS CVBS YC - Analogue stereo- Video 3 CVBS YC - Analogue stereo- Video 4 CVBS YC - Analogue stereo CVBS Digital stereo Video 5 RGB Digital 5.1 YCrCb (Coaxial) YC - Analogue stereo C
Résumé du contenu de la page N° 8
M300/ M301 Re:connect Video format Format ⇔ Quality Using the video switch, you The quality of the picture connect different video formats reproduction depends to a large to the inputs as well as the extent on the video format you monitor output. use. As we are dealing with a video The more parameters that affect switch here, the video signals the picture, such as brightness, are output in the same format colour and contrast, that are as they are fed in. grouped togeth
Résumé du contenu de la page N° 9
M300/ M301 Re:connect SCART output features Monitor connection panel If your device is fitted with a The monitor connection panel is SCART input, this is the set out the same for the M300 recommended connection to and the M301 versions of the use as you can also output a video switch. 6/12 voltage through the SCART connector. This switching voltage automatically switches on the TV device with the correct input, once an RGB signal is present from the M51 or the
Résumé du contenu de la page N° 10
M300/ M301 Re:connect Video switch operation Selecting the video source Selecting the recording source The different sources are selected through the SOURCE menu. Press the Source button If you want to make a recording on the M51 and the following using a device such as a video menu appears: recorder, for example, the M51 needs to know which source is to be recorded from. To do this, select the source as described previously in the Selecting the video source
Résumé du contenu de la page N° 11
M300/ M301 Re:connect Free selection of the Modifying source names listening source while recording The video switch offers you the option of selecting your own The M51 also offers you the names for the inputs. You no option of listening to one source longer have to remember which at the same time as you record external device is connected to another. which input. You can assign names that tell you immediately You could for example, be what is connected where. recordin
Résumé du contenu de la page N° 12
M300/ M301 Re:connect Edit function The following name changing options are available: The Cursor softkey moves the [ ] cursor to the left Please note The Cursor moves the [ ] cursor to the right Whenever you can change a setting using the rotary control The Delete softkey deletes the knob in the next section, the character at the position where area to be modified appears in the [ ] cursor is currently the display betwe
Résumé du contenu de la page N° 13
M300/ M301 Re:connect Edit characters [ ] Once the required source name has been selected in this way, it The actual modification of the can be saved with the Store individual characters (letters softkey. and digits) is done through the rotary control knob. If you want to exit without When you turn the knob, upper saving, press the Cancel case letters appear in softkey. alphabetical order, followed by lower case and then the digits from 0 - 9. This order can be
Résumé du contenu de la page N° 14
M300/ M301 Re:connect Restoring standard names You are then returned to the Setup menu. If you want to change a modified source name back to The standard name is now the factory setting, select the restored. In our example, this corresponding video source would be Video-1. from the SOURCE menu. This is possible with: Video 1 to Video 6 and TV You call up this function by pressing the Setup key for about 2 seconds and then pressing the Source softkey
Résumé du contenu de la page N° 15
M300/ M301 Re:connect Technical data Video data Video bandwidth Up to 10 MHz/ ± 3dB (HDTV enabled) Distortion factor < 0.1% SN ratio > 60 dB (Typically .5 MHz) Replay formats: S-VHS CVBS RGB YCrCb Systems PAL NTSC Audio data Audio bandwidth 20 Hz - 20 kHz/ ± 1dB Noise voltage spacing > 100 dB (Typically 1 Vpp) Channel separation > 70 dB Distortion factor (THD) < 0.02%
