Résumé du contenu de la page N° 1
IEEE 1394 OHCI PCI Board
for Windows98/98SE/2000/Me
PCIFW1U
User’s Guide
Rev. 6.0
November 2000
Résumé du contenu de la page N° 2
PCIFW1U User's Guide 1. Introduction........................................................................... 1 1-1. Before Using the PCIFW1U 1 1-2. Package 1 2. Setup the OHCI Driver ........................................................ 2 2-1. Windows 98 Installation 2 2-2. Windows 98 SE Installation 9 2-3. Windows 2000 Installation 16 2-4. Windows Me Installation 18 3. Setup the 1394 Device ......................................................... 20 3-1. DVCAM Installation 20 3-1-
Résumé du contenu de la page N° 3
5. How to use RsDvCap .......................................................... 44 5-1. Main menu 45 5-2. Control Bars 46 5-2-1. Camera and Audio Select Bar 46 5-2-2. Camera Control Bar 46 5-2-3. Video Control Bar 47 5-3. Application settings 48 5-4. Capturing a video from a DVCAM in camera mode 52 5-5. Capturing a video from a DV tape 53 5-6. DV Batch Capture 54 5-7. Exporting a video to a DVCAM 56 6. How to use RsDvStill ......................................................
Résumé du contenu de la page N° 4
1. Introduction This User’s Guide describes how to install, use, and troubleshoot the RATOC PCIFW1U 1394 PCI Board(called PCIFW1U in this User’s Guide). The information in the README.TXT file on the CD-ROM may include the latest information. Be sure to read the README.TXT file as well. 1-1. Before Using the PCIFW1U • Never attempt to disassemble the PCI Board. • Do not bend, drop or strike the PCI Board or the cable, or subject it to heavy pressure. • Information in this document is subject to c
Résumé du contenu de la page N° 5
2. Setup the OHCI Driver This section describes the OHCI driver installation. First, confirm your Windows version. When your Windows version is Windows 98, go to the section 2-1. When your Windows version is Windows 98 SE(Second Edition), go to the section 2-2. When your Windows version is Windows 2000, go to the section 2-3. When your Windows version is Windows Me(Millennium Edition), go to the section 2-4. 2-1.Windows 98 Installation To use the PCIFW1U on Windows 98, follow steps through. Make
Résumé du contenu de la page N° 6
Windows98 Step1.Install the PCIFW1U into a PCI slot Install the PCIFW1U into a slot and push it in until it is firmly seated. Connect the white HDD Connector on the PCIFW1U PCI Board(J1 Connector) to a HDD power connector of your PC. J1 Connector 3
Résumé du contenu de la page N° 7
Step2.Install the OHCI driver 1.When the PCIFW1U is installed into a PCI slot, Hardware Wizard will detect the PCIFW1U automatically and you will see the screen below. Click [Next]. 2. When the following window appears, select [Search for the best driver for your device (Recommended)]. Then click [Next]. 4 Windows98
Résumé du contenu de la page N° 8
Windows98 3.When the following window appears, click [Next]. (You do not have to check any boxes) 4.When the following window appears, select [The updated driver (Recommended) NEC Firewarden OHCI Compliant IEEE 1394 Host Controller]. Then click [Next]. 5
Résumé du contenu de la page N° 9
5.When the following window appears, click [Next]. 6.When the following window appears, insert the Windows 98 CD-ROM into the CD-ROM drive. Then click [OK]. 7.If the following window appears, type “D:\Win98” or “C:\Windows\options\cabs” in the Copy files from box, where “D” means the CD-ROM drive. After that, click [OK]. If your CD-ROM drive is not “D”, you must replace “D” to the appropriate drive name. 6 Windows98
Résumé du contenu de la page N° 10
Windows98 8.When the following window appears, click [Finish]. You have now completed the installation of the OHCI driver. 7
Résumé du contenu de la page N° 11
Step3.Verify the OHCI driver installation To verify the OHCI driver installation, follow steps through. 1.Click My Computer with the right button of the mouse. 2.Select Properties. 3.Click the Device Manager tab. 4.Double-click “1394 Bus Controller”. 5.If there is a NEC Firewarden OHCI Compliant IEEE 1394 Host Controller string without any yellow “!” marks or red “X” marks under the 1394 Bus Controller, the OHCI driver for the PCIFW1U is installed correctly. Check h
Résumé du contenu de la page N° 12
Windows98SE 2-2.Windows 98 SE Installation To use the PCIFW1U on Windows 98 Second Edition, follow steps through. Make sure your Windows is Windows98 Second Edition by checking the “Properties” of “My Computer”. If you can find “Second Edition”, you have Windows98 Second Edition. 9
Résumé du contenu de la page N° 13
Step1.Install the PCIFW1U into a PCI slot Install the PCIFW1U into a slot and push it in until it is firmly seated. Connect the white HDD Connector on the PCIFW1U PCI Board(J1 Connector) to a HDD power connector of your PC. J1 Connector Step2.Install the OHCI driver 1.When the PCIFW1U is installed into a PCI slot, Hardware Wizard will detect the PCIFW1U automatically and you will see the screen below. Click [Next]. 10 Windows98SE
Résumé du contenu de la page N° 14
Windows98SE 2. When the following window appears, select [Search for the best driver for your device (Recommended)]. Then click [Next]. 3.When the following window appears, click [Next]. (You do not have to check any boxes) 11
Résumé du contenu de la page N° 15
4.When the following window appears, select [The updated driver (Recommended) NEC Firewarden OHCI Compliant IEEE 1394 Host Controller]. Then click [Next]. 5.When the following window appears, click [Next]. 12 Windows98SE
Résumé du contenu de la page N° 16
Windows98SE 6.When the following window appears, insert the Windows 98 Second Edition CD-ROM into the CD-ROM drive. Then click [OK]. 7.If the following window appears, type “D:\Win98” or “C:\Windows\options\cabs” in the Copy files from box, where “D” means the CD-ROM drive. After that, click [OK]. If your CD-ROM drive is not “D”, you must replace “D” to the appropriate drive name. 8.When the following window appears, click [Finish]. You have now completed the installation of t
Résumé du contenu de la page N° 17
Step3.Verify the OHCI driver installation To verify the OHCI driver installation,follow steps through. 1.Click My Computer with the right button of the mouse. 2.Select Properties. 3.Click the Device Manager tab. 4.Double-click “1394 Bus Controller”. 5.If there is a NEC Firewarden OHCI Compliant IEEE 1394 Host Controller string without any yellow “!” marks or red “X” marks under the 1394 Bus Controller, the OHCI driver for the PCIFW1U is installed correctly. Check h
Résumé du contenu de la page N° 18
Windows98SE Step4.Microsoft Windows Update You should update your Windows 98 SE to improve performance. To update your Windows 98 SE, follow steps through. 1.Click Start with the left button of the mouse. 2.Select Windows Update. 3.You will see the screen below. Click PRODUCT UPDATES. 4.You will see the screen below.Check Windows 98 Second Edition 1394 Storage Supplement and download the component. For more information on the component, refer to Read this first on the screen. 15
Résumé du contenu de la page N° 19
2-3.Windows 2000 Installation To use the PCIFW1U on Windows 2000, follow steps through. Step1.Install the PCIFW1U into a PCI slot Install the PCIFW1U into a slot and push it in until it is firmly seated. Connect the white HDD Connector on the PCIFW1U PCI Board(J1 Connector) to a HDD power connector of your PC. J1 Connector 16 Windows2000
Résumé du contenu de la page N° 20
Windows2000 Step2.Verify the OHCI driver installation When you install the PCIFW1U into a PCI slot, the OHCI driver is installed automatically by the Hardware Wizard.To verify the OHCI driver Installation, follow steps through. 1.Click My Computer with the right button of the mouse. 2.Select Properties. 3.You will see the screen below. Click the Hardware tab. 4.Click the “Device Manager” button. Click here 5.If there is a NEC Firewarden OHCI Compliant IEEE 1394 Host Controll
