Instruction d'utilisation Pelco S66X

Résumé du contenu de la page N° 1

®
S66/S66X
Sun Shroud
Installation Manual
Manual C410M - 9/94
1.0 WARNINGS 2.0 SCOPE
Prior to installation and use of this product, the following This manual covers the S66/S66X Sun Shroud for the
WARNINGS should be observed. EH66 and EH66X Series Environmental Enclosures.
1. Installation and servicing should only be done by 3.0 DESCRIPTION
Qualified Service Personnel and conform to all
Local codes. The S66/S66X sun shroud is designed to protect the
EH66/EH66X enclosure from the direct rays of

Résumé du contenu de la page N° 2

4.0 INSTALLATION 3. Align the screw holes in the sun shroud and en- closure lid. To install the sun shroud, perform the following steps: Note: The sun shroud can be aligned in 1. Unclamp the enclosure lid and remove. either direction and fits over the top of the enclosure and vent cap(s). 2. Remove the six (6) screws from the enclosure lid. 4. Install the screws with the spacers as illustrated in Figure 1 and tighten. Figure 1. Sun Shroud Assembly Diagram 2 PELCO Manual C410M — 9/94

Résumé du contenu de la page N° 3

5.0 WARRANTY AND RETURN INFORMATION WARRANTY RETURNS PELCO will repair or replace, without charge, any In order to expedite parts returned to the factory for merchandise proved defective in material or workman- repair or credit, please call the factory at (800) 289- ship for a period of one year after the date of shipment 9100 or (559) 292-1981 to obtain an authoriza- (six months on all pan and tilts with auto scan and tion number (CA number if returned for credit, and RA ® medium duty scanners,

Résumé du contenu de la page N° 4

® PELCO 300 West Pontiac Way, Clovis, CA 93612-5699 (559) 292-1981 • (800) 289-9100 FAX (800) 289-9150 or (559) 292-3827 • DataFAX (800) 289-9108 or (559) 292-0435 (Product specifications subject to change without notice.) C410M 4 PELCO Manual C410M — 9/94