Instruction d'utilisation Pelco ICI3008

Résumé du contenu de la page N° 1

®
ICI3016/ICI3008
16- and 8-Position
®
Inter-Check Switchers
Installation and Operation
Manual C1007M-B (2/96)
1.0 WARNINGS 2.0 SCOPE
Prior to installation and use of this product, the following This manual covers the installation and operation of the
®
WARNINGS should be observed. Inter-Check ICI3008 and ICI3016 switchers.
1. Installation and servicing should only be done by 2.1 DESCRIPTION
Qualified Service Personnel and conform to all
®
Local codes. Only use replacement parts The Inter-Che

Résumé du contenu de la page N° 2

3.0 INSTALLATION 4.0 PROGRAMMING 1. Connect the 9-pin interface cable (supplied with the NOTE: For a complete explanation of pro- ICI3008/ICI3016 switcher) into the port labeled “RS gramming features, refer to the programming 232” of the ICI3000P (refer to Fig.1). section of the operation manual supplied with the ICI3000P. 2. Connect the modular phone plug of the interface cable into the port labeled “DATA IN” on the 4.1 REGISTER/CAMERA/ALARM ICI3008/ICI3016 switcher (refer to Fig.1). DWELL AS

Résumé du contenu de la page N° 3

Video Video In Power RS-232 Alarm Data in Out In 2 1 2 C 1 Alarm Out Data In Power 1 2 3 4 5 6 7 8 Figure 1. Data Cable Connection Between ICI3000P and ICI3008 Pelco Manual C1007M-B (2/96) 3

Résumé du contenu de la page N° 4

Following is an explanation of the prompts: 4.2 EDITING AN EXISTING REGISTER LIST REG: This is the electronic cash register (ECR) number. If using an ICI3000P, an ECR’s number is To edit a camera list, press [ENTER]. determined by the address assigned to it on the ICI1000PIM installed at the register. Press [ESC] until the desired line is displayed. Enter the appropriate data as described above. CAM: This is the camera number you wish to assign to an ECR. The camera number is determined

Résumé du contenu de la page N° 5

6.0 ALARM OUTPUTS For example; when camera 4 is selected, alarm output 4 will be enabled. The output for both switchers is nor- Both the ICI3008 and ICI3016 “shadow switchers” pro- mally open. vide alarm outputs for alarming other peripheral equip- ment. The ICI3008 provides eight (8) alarm outputs and The following diagrams list the pin assignments for both the ICI3016 provides sixteen (16) alarm outputs. switchers. Use this information in wiring external, alarmable equipment. A particular ala

Résumé du contenu de la page N° 6

12 34 567 8 1 2 3 4 5 6 7 8 O PE N OPEN - DI P S WI T CH DE S CRI P T I ON- Swi t c h # F unc t i on 1 Bank addr es s Bank Address 2 Bank addr es s Bank Address 3 Bank addr es s Bank Address 4 Bank addr es s Bank Address 5 l oop Loop Select se l e c t 6 Baud Rate Select baud r a t e se l e ct 7 NC NC 8 NC NC NOTE: Cover must be removed to access this dip switch. * Co v e r mu s t beremov ed t o ac c e s s t his DI P S wi t c h Loop = 0 CAMERAS 16- 31 Addr es s = 0001 VI D E O O UT 16 1 5 14 13 1

Résumé du contenu de la page N° 7

Notes: Pelco Manual C1007M-B (2/96) 7

Résumé du contenu de la page N° 8

7.0 WARRANTY AND RETURN INFORMATION WARRANTY RETURNS Pelco will repair or replace, without charge, any merchandise proved In order to expedite parts returned to the factory for repair or credit, please defective in material or workmanship for a period of one year after the date call the factory at (800) 289-9100 or (559) 292-1981 to obtain an of shipment. authorization number (CA number if returned for credit, and RA number if returned for repair). Exceptions to this warranty are as noted below: