Résumé du contenu de la page N° 1
9A10495701
Z
-
CD X10i
Micro Hi-Fi System
OWNER’S MANUAL
Includes adapters for:
iPod nano
iPod with video
iPod mini
iPod with Click Wheel
iPod with color display
Adapters sold separately:
iPod with dock connector
Résumé du contenu de la page N° 2
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- The exclamation point within an equilateral triangle is SERVICEABLE PARTS INSIDE. REFER SERVICING TO intended to alert the user to the pres
Résumé du contenu de la page N° 3
This product has been designed and manufactured according to WARNING: TO PREVENT FIRE OR SHOCK FDA regulations “title 21, CFR, chapter 1, subchapter J, based on HAZARD, DO NOT EXPOSE THIS APPLIANCE the Radiation Control for Health and Safety Act of 1968“, and is TO RAIN OR MOISTURE. classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housing
Résumé du contenu de la page N° 4
Contents Before Using the Unit Thank you for choosing TEAC. Read this manual carefully Read this before operation to get the best performance from this unit. < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The ventilation holes should not be covered. Make sure there Before Using the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 is at least 5 cm of space on each side of the unit. Do NOT Discs. . . . . . . . .
Résumé du contenu de la page N° 5
Discs Discs which can be played on this unit: < CD-R and CD-RW discs are more sensitive to the effects of • Conventional audio CDs bearing the COMPACT DISC heat and ultraviolet rays than ordinary CDs. It is important DIGITAL AUDIO logo on the label: that they are not stored in a location with direct sunlight and keep your discs away from sources of heat such as radiators or heat-generating electrical devices. < Printable discs aren’t recommended because the label side • Properly finalized CD-R a
Résumé du contenu de la page N° 6
Connections CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord. FM antenna AM antenna Speaker (R) Speaker (L) Subwoofer C B E A G CAUTION: Make sure to fasten the Dock’s cable with this clip. Side panel of F D the main unit Dock 6
Résumé du contenu de la page N° 7
A E iPod Dock SPEAKERS Connect the Dock to the “TO DOCK” port, and fasten the Connect the left speaker’s plug to L, and the right speaker’s cable with the clip. plug to R. < Securely insert the plug in the direction as figured. < If not using the included speakers, make sure the speakers you use are at least 4 Ω impedance. < Do not connect anything other than speakers to these B AM loop antenna terminals. Position the antenna for the best sound. If you want, you can hook the AM antenna on a wall
Résumé du contenu de la page N° 8
Unit Functions B A C R S T M L U N V O I J K H P J Q E I D H W A B C D E F G 8
Résumé du contenu de la page N° 9
A M STANDBY/ON FM MODE Use this button to turn the unit on or standby. In FM TUNER mode, use this button to select stereo or The main unit is powered via the subwoofer. You need to first monaural. turn on the subwoofer. N PRESET/SCROLL When the main unit is in the standby mode, the power In TUNER mode, use these buttons to select a preset station. indicator of the Subwoofer is orange. In iPod mode, use these buttons to scroll up and down the When the unit is turned on, the indicator turns blue.
Résumé du contenu de la page N° 10
Wall Mounting Remote Control Unit The provided Remote Control Unit allows the unit to be operated You can mount the main unit and/or the left and right speakers from a distance. on a wall. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. Precautions < Pay attention to the length of cables. iPod Dock: 39” (1m) < Even if the remote control unit is operated within the effective Speaker and Subwoofer cables: 118” (3m) range, remote control
Résumé du contenu de la page N° 11
Getting started The CD-X10i comes mounted with an adapter for iPod with 3. Insert the adapter into the Dock of the CD-X10i. color display (40GB, 60GB), “60GB (color) + Photo 40GB/60GB”. Fit the front edge of the adapter into the Dock, and then To play your iPod through the CD-X10i, you have first to check if press the back edge of the adapter onto the Dock until a the factory mounted adapter fits your model of iPod. If it does slight “click” is heard indicating the adapter is inserted not, you h
Résumé du contenu de la page N° 12
Basic Operation (Rear panel of the subwoofer) 3 Select a source by pressing the FUNCTION button. 1 2 3 4 1 Turn on the subwoofer. 2 Press the STANDBY/ON switch on the main unit. < To listen to an external source connected to the AUX IN jack, select AUX. < In iPod and AUX modes, the display always shows the clock and the volume level. The ring surrounding the STANDBY/ON button lights when < If you press and hold the TIME SET button for 3 seconds in the unit is on. CD or TUNER mode, the clock wi
Résumé du contenu de la page N° 13
Headphones Sleep Timer For private listening, first reduce the volume level to You can set a sleep timer so the unit turns itself off after a minimum. Then insert the plug from your headphones into specified time. the PHONES jack, and adjust the volume using the VOLUME buttons. The sound from the speakers is cut off while the Press the SLEEP button repeatedly until desired time appears headphone jack is inserted. on the display. SLEEP 90, 60 or 30: The power will be switched off 90, 60 or 30 m
Résumé du contenu de la page N° 14
Listening to iPod Insert the iPod into the Dock of the CD-X10i. Then press the Play/Pause button (y/J) on the iPod. The CD-X10i will automatically turn on and start playback from the iPod’s music list. To suspend playback temporarily < If the iPod that is in playback mode is inserted into the Dock, (pause mode) the CD-X10i will automatically turn on and start playback of Press the Play/Pause button (G/J) during playback. Playback the iPod. stops at the current position. To resume playback, press
Résumé du contenu de la page N° 15
To go back to the previous menu To activate the shuffle mode Press the MENU button to go back to the previous menu. During playback, press the SHUFFLE button to change the This button is equivalent to the MENU button on your iPod. shuffle mode. Each time the SHUFFLE button is pressed, the SHUFFLE setting of iPod is changed as follows: songs albums off If iPod is set to shuffle songs or albums, the Shuffle icon ( ) appears in the iPod’s display. Select the menu item To activate the repeat mode Pr
Résumé du contenu de la page N° 16
Listening to CD 3 5 2 1 4 1 Press the FUNCTION button to select “CD”. 4 Press the OPEN/CLOSE button to close the CD door. < It takes a few seconds for the unit to load the disc. 2 Press the OPEN/CLOSE button. < When no disc is loaded in the CD player, “nocd” is displayed. total tracks total playing time 3 Put a disc onto the center spindle of the player with the label side facing you. Press the disc onto the spindle until a slight “click” is heard indicating the disc is mounted correctly. 5 Pr
Résumé du contenu de la page N° 17
Repeat Playback (CD) Every time the REPEAT button is pressed, the mode is changed as follows: REPEAT REPEAT ALL (off) To suspend playback temporarily < If one of the following buttons is pressed, repeat mode will (pause mode) be canceled: STOP, FUNCTION, FM/AM, OPEN/CLOSE, STANDBY/ON Press the Play/Pause button (G/J) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button (G/J) again. Repeat one track Press the REPEAT button once during playback.
Résumé du contenu de la page N° 18
Shuffle Playback (CD) Programmed Playback (CD only) The tracks can be played randomly. Press the SHUFFLE button during playback or when in the stop mode. The SHUFFLE indicator appears on the display. FUNCTION MEMORY < If you press the / button during shuffle playback, next track will be randomly selected and played. If you press the . button, the currently played track will be played from the beginning. A track cannot be replayed during shuffle Up to 32 tracks can be programmed in the desired o
Résumé du contenu de la page N° 19
3 Press the Skip button (.or/) repeatedly to select a To check the programmed order track, then press the MEMORY button. track number program number In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. To add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “--” appears on the display. Select a track number using the Skip button (.or/) and then press the MEMORY button. The track is adde
Résumé du contenu de la page N° 20
Listening to an External Source 1 2 3 1 Connect the PHONES jack (audio output jack) of a 3 Play the source, and adjust the volume using the portable audio player to the AUX IN jack of the CD-X10i VOLUME buttons of the CD-X10i and of the audio using the supplied stereo mini plug cable. player. When using the PHONES jack of your mini player, you must adjust the volume of the mini-player or you may hear no sound from your CD-X10i. < Turning the volume of the mini player up too high may cause the so
