Résumé du contenu de la page N° 1
DXJ_Cover[U].fm Page 1 Wednesday, December 26, 2007 1:47 PM
COMPACT COMPONENT SYSTEM
CA-DXJ36
SUPER VIDEO
INSTRUCTIONS
GVT0245-001A
[US, UN, A, UG, UX]
Résumé du contenu de la page N° 2
DXJ_Safty[U].fm Page 1 Tuesday, November 27, 2007 12:00 PM Warnings, Cautions and Others Caution–– (standby/on) button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The button in any position does not disconnect the mains line. • When the System is on standby, the STANDBY lamp lights red. • When the System is turned on, the STANDBY lamp goes off. The power c
Résumé du contenu de la page N° 3
DXJ_Safty[U].fm Page 2 Tuesday, November 27, 2007 12:00 PM Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Front view Side view Wall o
Résumé du contenu de la page N° 4
DX-J36TOC.fm Page 1 Tuesday, November 27, 2007 11:46 AM Introduction Note on Region Code Playable Disc/File Types INFO DVD players and DVD Video have their own Region Code numbers. This System can play back only DVD Video with an appropriate Region Code number. • For details, see “Specifications” on page 47. EX.: For Southeast Asia COMPACT DIGITAL VIDEO SUPER VIDEO DIGITAL AUDIO Audio formats The “√” in the list below shows availabl
Résumé du contenu de la page N° 5
DX-J36TOC.fm Page 2 Tuesday, November 27, 2007 11:46 AM Precautions Contents Connections....................................................................................3 Installation Connecting a USB Mass Storage Class Device..........................6 • Install the System in a location with adequate ventilation to Preparing the Remote Control ....................................................6 prevent internal heat build-up in the System. Cancelli
Résumé du contenu de la page N° 6
connection.fm Page 3 Wednesday, December 26, 2007 1:50 PM Connections Do not connect the AC power cord until all other Supplied accessories connections have been made. • FM antenna (x1) • AM loop antenna (x1) • Composite video cord (x1) • Connect VIDEO OUT directly to the video input of your • Remote control (x1) TV. Connecting VIDEO OUT to a TV via a VCR may • Batteries (x2) interfere with your viewing when playing back a copy- • AC plug adapter (x1) protected source. Connecting VI
Résumé du contenu de la page N° 7
connection.fm Page 4 Tuesday, November 27, 2007 11:46 AM For better FM reception ~ TV/monitor Composite video cord (supplied) S-Video cord (not supplied) FM outdoor antenna Green Red (not supplied) Blue Component video cord (not supplied) • Disconnect the supplied FM antenna, and connect an outdoor FM antenna using a 75 Ω wire with coaxial type • To select progressive scanning mode (see page 6), use connector (IEC or DIN45325). COMPONENT jacks. • Make sure the antenna
Résumé du contenu de la page N° 8
connection.fm Page 5 Tuesday, November 27, 2007 11:46 AM ⁄ Speakers Speaker layout To enjoy multi-channel sound, locate the speakers as To connect the speaker cords follows. If you cannot locate like this, adjust the speaker setting by using the SPK. SETTING menu (see page 38). Front left Front right Center speaker speaker speaker Release Press and hold Insert • When connecting the speaker cords, match their polarity with that of the speaker terminals: red/grey/green to (+) and
Résumé du contenu de la page N° 9
connection.fm Page 6 Tuesday, December 4, 2007 11:31 AM # Power cord Cancelling the Demonstration Main Unit ONLY Plug the AC power cord to a wall outlet. 2 sec. DO NOT plug in before setting the voltage DEMO OFF selector and all connection procedures are completed. DEMO START Connecting a USB Mass Storage Class Device You can connect a USB mass storage class device such as a To start the demonstration, select DEMO START. USB flash memory, hard disk drive, mult
Résumé du contenu de la page N° 10
Indication.fm Page 7 Tuesday, November 27, 2007 11:46 AM Display Indication The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 2 3 4 5 6 78 9r pqwe t y 1 Source signal indicators 9 Timer indicators • DTS: lights when DTS signals are detected. •: lights when Daily Timer or Recording Timer is on • DIGITAL: lights when Dolby Dig
Résumé du contenu de la page N° 11
Basic_op.fm Page 8 Tuesday, November 27, 2007 11:45 AM Daily Operations—Playback ¥ Turn on the power. In this manual, the operations using the remote control The STANDBY Led on the main unit goes off. are mainly explained; however, you can use the buttons • Without pressing AUDIO, the System also turns and controls on the main unit if they have the same (or on by pressing one of the source selecting buttons in similar) name and marks. the next step. ø Select the sourc
Résumé du contenu de la page N° 12
Basic_op.fm Page 9 Tuesday, November 27, 2007 4:46 PM To tune in to a station Adjusting the Volume While FM or AM is selected... The volume level can be adjusted in 32 steps (VOLUME 1 sec. MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX). Increases the frequency. Remote control: Main unit: Decreases the frequency. Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops. • When y
Résumé du contenu de la page N° 13
Basic_op.fm Page 10 Tuesday, November 27, 2007 11:45 AM 4 Store the station. To connect a USB mass storage class device USB cable (not supplied) To tune in to a preset station 1 Select the band (FM or AM). • Always set the volume to the minimum level when connecting or disconnecting the USB mass storage class TUNER FM TUNER AM device. AUX • To disconnect the USB mass storage class device safely, turn off the System before disconnecting the device.
Résumé du contenu de la page N° 14
Basic_op.fm Page 11 Tuesday, November 27, 2007 11:45 AM • For DivX files, each time you press the or button, you To select a disc can skip to a scene of 30 seconds or 5 minutes away depending on the DivX file. Playback starts. (while holding...) To return to normal playback, press DVD/CD 3 or Remote ONLY USB MEMORY 3. To select a title/group While playing... Remote ONLY To select an item directly You can select a title/chapter/track directly and start pl
Résumé du contenu de la page N° 15
Basic_op.fm Page 12 Tuesday, November 27, 2007 11:45 AM 7 For SVCD/VCD with PBC To start playback: To stop: While playing a disc with PBC, “PBC” appears on the display instead of the playing time. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. • To select a number, see “How to select a number” on page 8. To rewind or fast-forward tape: To change the tape running direction (deck B only) To move to the next or
Résumé du contenu de la page N° 16
Basic_op.fm Page 13 Tuesday, November 27, 2007 11:45 AM Daily Operations—Sound & Other Adjustments Adjusting the Speaker Output Level Remote Control Remote ONLY INFO You can adjust the speaker output level from –6 (dB) to +6 (dB). Initial setting: +4 (dB). • You can also use the setup menu to adjust the speaker output level (see page 38). • The function is not available when the surround mode is set to “STEREO” or Mic Mixing is activated. CLOCK/TIMER 1 Select the speaker
Résumé du contenu de la page N° 17
Basic_op.fm Page 14 Tuesday, November 27, 2007 11:45 AM Applying an Optimal Bass Sound Effect Creating Your Own Sound INFO Remote —VARIO BASS Modes—User Mode INFO ONLY You can adjust bass sound characteristics to create a sound You can adjust the preset Sound Modes to create your own suitable for the playback source to your preference. Sound Modes which suit your taste. The changed settings can be stored as the USER1, USER2 and USER3 Modes. AUTO OFF LITE.n.EASY (Initial setting) (Canceled)
Résumé du contenu de la page N° 18
Basic_op.fm Page 15 Tuesday, November 27, 2007 11:45 AM • While one of the Surround Modes is activated, Selecting the Surround Modes INFO “” lights up. • For “DVD/CD” and “USB” (multi-channel software): 1 * Selectable Surround Mode varies depending on the 1 * AUTO DOLBY D/DTS/PPCM/LPCM software. 2 * MOVIE (Dolby Pro Logic II Movie) and MUSIC (Dolby STEREO Pro Logic II Music) cannot be used for DivX file. 1 Initial setting: DOLBY D/DTS/PPCM/LPCM* • For “DVD/CD” and “USB” (stereo software):
Résumé du contenu de la page N° 19
Basic_op.fm Page 16 Tuesday, November 27, 2007 11:45 AM To adjust the picture tone Remote ONLY Setting the Clock INFO 1 Select “USER1” or “USER2.” Without setting the built-in clock, you cannot use any timers • Follow steps 1 and 2 on page 15. except the Sleep timer. 2 Select a parameter you want to adjust. • To exit from the clock setting, press CLOCK/TIMER as required. • To correct a misentry during the process, press CANCEL while holding SHIFT. You can return to the previous step. 1 Act
Résumé du contenu de la page N° 20
UniqueDisc.fm Page 17 Tuesday, November 27, 2007 11:45 AM Unique Video Disc/File Operations Remote Selecting the Audio Track ONLY INFO Remote Control For DVD Video/DivX: While playing back a chapter/file containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to. For DVD-VR/SVCD/VCD: While playing back a chapter/ Number track, you can select the a
