Instruction d'utilisation AMX DAS-AMFM

Résumé du contenu de la page N° 1

Installation Guide
DAS-AMFM AM/FM Tuner Module
Note: The ribbon cable must be oriented so that the red stripe is con-
Overview
nected to Pin 1 on the connector.
Add AM/FM Radio functionality to your Mi Series system with the
DAS-AMFM AM/FM Tuner Module (FG1110-01).
• Up to two DAS-AMFM modules can be added to each Mi Series
controller.
Rear of controller
• Each tuner module uses one source input on the audio controller.
WARNING: Disconnect all power sources before opening the chassis. Fail-
u

Résumé du contenu de la page N° 2

Dual Tuner Installation Instructions Setting the Jumpers on the Tuner Modules When installing two tuner modules, the jumper settings on the tuners Installing The Tuner Modules in the Controller themselves must change as well as the rear panel jumpers (to identify 1. Remove the cover from the controller. each Tuner module as Tuner 1 or Tuner 2). 2. With the back of the unit facing you, remove the screws from both Examine the configuration of the jumpers located on the Tuner Modules, Tuner Opt