Résumé du contenu de la page N° 1
Agilent X-Series
Signal Analyzer
This manual provides documentation for the
following X-Series Analyzer:
EXA Signal Analyzer N9010A
N9010A EXA Specifications
Guide
(Comprehensive Reference Data)
Résumé du contenu de la page N° 2
Notices © Agilent Technologies, Inc. 2007 - 2010 licensed as “Commercial computer soft- Manual Part Number ware” as defined in DFAR 252.227-7014 No part of this manual may be reproduced N9010-90025 (June 1995), or as a “commercial item” as in any form or by any means (including Supersedes: August 2009 defined in FAR 2.101(a) or as “Restricted electronic storage and retrieval or transla- computer software” as defined in FAR tion into a foreign language) without prior 52.227-19 (June 1987
Résumé du contenu de la page N° 3
Notice Warranty This Agilent technologies instrument product is warranted against defects in material and workmanship for a period of one year from the date of shipment. During the warranty period, Agilent Technologies will, at its option, either repair or replace products that prove to be defective. For warranty service or repair, this product must be returned to a service facility designated by Agilent Technologies. Buyer shall prepay shipping charges to Agilent Technologies and Agilent Tec
Résumé du contenu de la page N° 4
4
Résumé du contenu de la page N° 5
Contents 1. Agilent EXA Signal Analyzer Definitions and Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Conditions Required to Meet Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Certificati
Résumé du contenu de la page N° 6
Contents Power Suite Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Channel Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Occupied Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Adjacent Channel Power (ACP) . . .
Résumé du contenu de la page N° 7
Contents 5. Option PFR - Precision Frequency Reference Specifications Affected by Precision Frequency Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 6. I/Q Analyzer Specifications Affected by I/Q Analyzer:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 8
Contents (EVM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Power vs. Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 EDGE Power vs. Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Power Ramp Relative Accuracy
Résumé du contenu de la page N° 9
Contents AM Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Residual PM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Measurement Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 12. Noise Figure Measurement A
Résumé du contenu de la page N° 10
Contents Occupied Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 Spectrum Emission Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 Spurious Emissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 Code Domain . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 11
Contents 20. DVB-T/H Measurement Application N6153A, DVB-T/H Measurements Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Channel Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Channel Power with Shoulder Attenuation View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Power Statistics CCDF . . . . . . .
Résumé du contenu de la page N° 12
Contents Frequency Points per Span . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 Resolution Bandwidth (RBW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 Range . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 13
1 Agilent EXA Signal Analyzer This chapter contains the specifications for the core signal analyzer. The specifications and characteristics for the measurement applications and options are covered in the chapters that follow. 13
Résumé du contenu de la page N° 14
Agilent EXA Signal Analyzer Definitions and Requirements Definitions and Requirements This book contains signal analyzer specifications and supplemental information. The distinction among specifications, typical performance, and nominal values are described as follows. Definitions • Specifications describe the performance of parameters covered by the product warranty (temperature = 5 to 50°C, unless otherwise noted). • 95th percentile values indicate the breadth of the population (≈2σ) of perf
Résumé du contenu de la page N° 15
Agilent EXA Signal Analyzer Frequency and Time Frequency and Time Description Specifications Supplemental Information Frequency Range Maximum Frequency Option 503 3.6 GHz Option 507 7 GHz Option 513 13.6 GHz Option 526 26.5 GHz Preamp Option P03 3.6 GHz Minimum Frequency Preamp AC Coupled DC Coupled Off 10 MHz 9 kHz On 10 MHz 100 kHz b Band Harmonic Mixing LO Multiple (N ) Mode a Band Overlaps 0 (9 kHz to 3.6 GHz) 1 Options 503,507, 513, 526 1− 1 (3.5 GHz to 7 GHz) 1 Option 507 1−
Résumé du contenu de la page N° 16
Agilent EXA Signal Analyzer Frequency and Time a. In the band overlap regions, for example, 3.5 to 3.6 GHz, the analyzer may use either band for measurements, in this example Band 0 or Band 1. The analyzer gives preference to the band with the better overall specifications (which is the lower numbered band for all frequencies below 26 GHz), but will choose the other band if doing so is necessary to achieve a sweep having minimum band crossings. For example, with CF = 3.58 GHz, with a span of
Résumé du contenu de la page N° 17
Agilent EXA Signal Analyzer Frequency and Time Description Specifications Supplemental Information −6 Achievable Initial Calibration ±1.4 × 10 Accuracy −8 Settability ±2 × 10 c Residual FM ≤10 Hz × N p-p in 20 ms , nominal Center Frequency = 1 GHz 10 Hz RBW, 10 Hz VBW a. Calibration accuracy depends on how accurately the frequency standard was adjusted to 10 MHz. If the adjustment procedure is followed, the calibration accuracy is given by the specifi- cation “Achievable Initial
Résumé du contenu de la page N° 18
Agilent EXA Signal Analyzer Frequency and Time Description Specifications Supplemental Information Precision Frequency Reference (Option PFR) Accuracy ±[(time since last adjustment × aging rate) + temperature stability + calibration a b accuracy ] Temperature Stability −8 20 to 30 °C ±1.5 × 10 −8 5 to 50 °C ±5 × 10 −10 Aging Rate ±5 × 10 /day (nominal) Total Aging −7 1 Year ±1 × 10 −7 2 Years ±1.5 × 10 −9 Settability ±2 × 10 c Warm-up and Retrace −7 300 s after turn on
Résumé du contenu de la page N° 19
Agilent EXA Signal Analyzer Frequency and Time d. The achievable calibration accuracy at the beginning of the calibration cycle includes these effects: 1) Temperature difference between the calibration environment and the use environment 2) Orientation relative to the gravitation field changing between the calibration environment and the use environment 3) Retrace effects in both the calibration environment and the use environment due to turning the instrument power off. 4) Settability e.
Résumé du contenu de la page N° 20
Agilent EXA Signal Analyzer Frequency and Time Description Specifications Supplemental Information c Frequency Readout Accuracy ±(marker freq. × freq. ref. accy. + 0.25% Single detector only a × span + 5% × RBW + 2 Hz + 0.5 × b horizontal resolution ) d ±0.0032% (nominal) Example for EMC a. The warranted performance is only the sum of all errors under autocoupled conditions. Under non-autocoupled conditions, the frequency readout accuracy will nominally meet the specifica- tion equation, exc
