Résumé du contenu de la page N° 1
Owner’s Manual
ENGLISH
Résumé du contenu de la page N° 2
SAFETY INFORMATION EXPLANA EXPLANA EXPLANA EXPLANA EXPLANATION OF GRAPHICAL SYMBOLS TION OF GRAPHICAL SYMBOLS TION OF GRAPHICAL SYMBOLS TION OF GRAPHICAL SYMBOLS TION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equ
Résumé du contenu de la page N° 3
SAFETY INFORMATION ELECTRIC POWER ELECTRIC POWER ELECTRIC POWER ELECTRIC POWER ELECTRIC POWER 1 Power Sources - Connect this unit only to power sources specified in the Operating Instructions, and as marked on the unit. 2 Polarization - As a safety feature, some units are equipped with polarized AC power plugs which can only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into an outlet, turn the plug over and try again. If it still does not
Résumé du contenu de la page N° 4
TABLE OF CONTENTS T T T T TABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Safety Information Safety Information Safety Information Safety Information Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 5
GETTING THE MOST FROM THE NAD T 752 Thank you for choosing NAD. The T 752 A/V Surround Sound Receiver is a technologically advanced and highly capable product — yet we have invested great effort in making it simple and easy to use. The T 752 delivers a range of genuinely useful options for surround sound and stereo listening alike, using powerful digital signal processing and superbly accurate digital-audio circuitry. However, we have also been careful to ensure that the receiver is as musically
Résumé du contenu de la page N° 6
UNPACKING AND SETUP WHA WHA WHA WHA WHAT’S IN THE BOX T’S IN THE BOX T’S IN THE BOX T’S IN THE BOX T’S IN THE BOX Packed with your T 752 receiver you will find: An AM loop antenna A FM ribbon-wire antenna with balun A removable AC cable (if you wish, any IEC-standard AC cable of suitable wattage may be substituted). The HTR 2 remote control with 4 (four) AAA batteries. This owner’s manual. Save the packaging Please save the box and all of the packaging in which your T 752 arrived. Shou
Résumé du contenu de la page N° 7
ABOUT THE T 752 Though the T 752 is among the most technically sophisticated A/V receivers, we worked hard to make it one of the most musically transparent home-theater components available as well; this is what we mean by NAD’s “Music First” design philosophy. Here are just a few examples: The T 752 uses NAD’s proprietary Power Drive™ amplifier technology for all channels to preserve accurate, linear reproduction regardless of the loudspeaker. This uniquely efficient power-supply topol- ogy p
Résumé du contenu de la page N° 8
ABOUT THE T 752 UPGRADABILITY UPGRADABILITY UPGRADABILITY UPGRADABILITY UPGRADABILITY The T 752 receiver permits flexible system growth via individually accessible pre-out and main-in jacks for all three front channels, enabling external amplifiers to be used for any of these while still maintaining utility of the receiver’s on-board power-amplifier channels for additional channels, remote-room links, or any other suitable purpose. Of course, the T 752’s Surround Back channel outputs let a syste
Résumé du contenu de la page N° 9
QUICKSTART In case you simply cannot wait to experience the performance of your new NAD T 752 receiver, we provide the following “Quickstart” instructions to get you underway. The steps below connect your DVD player to the T 752’s DVD input; be sure to read “Input Setup”, below. PLA PLAY A DVD MOVIE Y A DVD MOVIE PLA PLA PLAY A DVD MOVIE Y A DVD MOVIE Y A DVD MOVIE Connect the T 752’s composite video or S-Video MONITOR OUT jack to your TV/monitor’s corresponding input. Connect your DVD playe
Résumé du contenu de la page N° 10
FRONT PANEL 12 345678 9 10 20 19 11 12 13 14 15 16 17 18 1 POWER: Press in to switch the receiver to Standby; the amber indicator (2) above the power button will light, but the main VFL display remains dark, and very little power is consumed. Pressing any other front-panel key, or the HTR 2 remote’s [ON] button, will switch the receiver on, making it operational, changing the amber Standby indicator to green and illuminating the VFL display. Pressing any front panel button (other than the [POWER
Résumé du contenu de la page N° 11
FRONT PANEL 11 VIDEO: Use to select a video input along with its assigned audio and digital inputs (see “Input Setup,” below). Press repeatedly to step through the T 752’s Video inputs. AUDIO: Use to select analog audio input independently of video input. Press repeatedly to step through the T 752’s audio inputs. See “Input Setup,” below. 12 TAPE MONITOR: Press to engage the Tape Monitor loop. The signal present at the rear-panel TAPE MONITOR IN jacks will be heard. Press again to release and r
Résumé du contenu de la page N° 12
REAR PANEL 23 4 56 7 8 1 16 9 10 15 14 13 12 11 ATTENTION! Please make all connections to your T 752 receiver with the unit powered off or unplugged. (It is also advisable to power-down or unplug all associated components while making or breaking any signal or AC power connections.) 1 FM & AM ANTENNA: The supplied wire “dipole” FM antenna will connect to the FM connector using the supplied “balun” adapter. It will usually work best when mounted on a vertical surface such as a wall, with arms ful
Résumé du contenu de la page N° 13
REAR PANEL 5 DISC: Connect the analog stereo audio output from a second CD player or other line-level audio source to this input. NOTE: Connecting a phonograph turntable to the T 752 requires an outboard magnetic phono-preamp component such as the NAD PP1; you cannot connect turntable directly to the DISC inputs. 6IR: These mini-jacks accept and output remote-control codes in electrical format, using industry-standard protocols, for use with “IR-repeater” and multi-room systems and related techn
Résumé du contenu de la page N° 14
SETTING UP THE T 752 GETTING ST GETTING ST GETTING ST GETTING ST GETTING STAR AR AR AR ARTED TED TED TED TED Before you make the first connection to your T 752, you should have the arrangement of your listening room/ home theater components and furniture mapped out, at least initially. Unfortunately, a discussion of the vital questions of loudspeaker placement and listening/viewing positions is beyond our scope here. Suffice it to say that these two questions will influence your system's ultimat
Résumé du contenu de la page N° 15
ABOUT THE ON-SCREEN DISPLAYS (OSD) AND FRONT-PANEL READOUT The T 752 receiver employs a simple, self-explanatory system of on-screen display "menus" that will appear on the connected video monitor/TV. These are required during the setup process (and are useful in day-to- day operation), so be sure to connect the monitor/TV before proceeding with setup. NOTE: The on-screen displays are carried on both the S-Video and composite MONITOR OUT jacks, but are not incorporated into the component-video o
Résumé du contenu de la page N° 16
ABOUT THE ON-SCREEN DISPLAYS (OSD) AND FRONT-PANEL READOUT SPEAKER SETUP SPEAKER SETUP SPEAKER SETUP SPEAKER SETUP SPEAKER SETUP Every surround-sound system requires "bass-management" to direct low-frequency content from any or all channels to the speakers best able to reproduce it. For this function to operate correctly, it is important that you correctly identify your speakers' capabilities. We use the terms "Small" and "Large" (and "None"), but note that physical size may be irrelevant. A "
Résumé du contenu de la page N° 17
ABOUT THE ON-SCREEN DISPLAYS (OSD) AND FRONT-PANEL READOUT As the test signal cycles around the speakers, the OSD (and the VFL front panel display) will highlight the currently playing channel. Now use the remote's [< < < < < / > > > > >] keys to adjust the loudness of the noise output from the currently playing channel to the required level (it’s usually simplest to begin with the left-front). The "level offset" reading on the right will change by 1 dB increments; ±12 dB adjustment is available
Résumé du contenu de la page N° 18
USING THE T 752 You may operate the T 752 receiver from its front panel or via the HTR 2 remote control. Since the remote will be the primary controller for most cases, we will focus on remote-controlled operations. Be sure also to read the section, "Front Panel" above. SELECTING SOURCES SELECTING SOURCES SELECTING SOURCES SELECTING SOURCES SELECTING SOURCES With the HTR 2’s remote's [Amp] device selected, the remote’s numeric-key section directly selects the receiver’s inputs, plus the internal
Résumé du contenu de la page N° 19
USING THE T 752 ABOUT ANTENNAS ABOUT ANTENNAS ABOUT ANTENNAS ABOUT ANTENNAS ABOUT ANTENNAS The supplied ribbon-wire FM antenna can be connected to the rear-panel FM-antenna input using the ‘balun’ included adapter, and should be fully extended to form a “T”. This folded-dipole antenna will usually work best oriented vertically, with the arms of its “T” full outstretched and arranged perpendicular to the origin of the desired broadcast. There are no ‘rules,’ however, and experimenting freely with
Résumé du contenu de la page N° 20
USING THE T 752 ABOUT THE T 752'S LISTENING MODES ABOUT THE T 752'S LISTENING MODES ABOUT THE T 752'S LISTENING MODES ABOUT THE T 752'S LISTENING MODES ABOUT THE T 752'S LISTENING MODES The T 752 receiver offers nine distinct listening modes, tailored for different types of recordings or program material. The table below lists which modes are available to what input signals. With a two-channel (STEREO) source the following listening modes can be selected: Stereo Downmix All output is directe
