Résumé du contenu de la page N° 1
MGP 464
MGP 464 DI
MGP 464 HD-SDI
Multi-Graphic Processor
68-1235-01 Rev. C
01 09
Résumé du contenu de la page N° 2
Precautions Safety Instructions • English Warning Power sources • This equipment should be operated only from the power source indicated on the product. This This symbol is intended to alert the user of important operating and maintenance equipment is intended to be used with a main power system with a grounded (neutral) conductor. The (servicing) instructions in the literature provided with the equipment. third (grounding) pin is a safety feature, do not attempt to bypass or disable it. Th
Résumé du contenu de la page N° 3
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Class A limits are designed to provide reasonable protection against harmful interference when the equipment is
Résumé du contenu de la page N° 4
Résumé du contenu de la page N° 5
Table of Contents Chapter One • Introduction ......................................................................................................1-1 About This Manual ....................................................................................................................1-2 About the MGP 464 Multi-Graphic Processor ...........................................................1-2 Features ................................................................................................
Résumé du contenu de la page N° 6
Table of Contents, cont’d Comm./IP Configuration menu .............................................................................................3-17 Viewing serial port and IP settings ...................................................................................3-17 Making changes to the serial port and IP configuration ................................................3-18 Advanced Configuration menu ................................................................................
Résumé du contenu de la page N° 7
Using the Configuration Page ............................................................................................5-4 System Settings screen .............................................................................................................5-4 Scaler I/O Settings screen .........................................................................................................5-5 Configuring the inputs ..........................................................................
Résumé du contenu de la page N° 8
Table of Contents, cont’d Chapter Six • Special Applications ......................................................................................6-1 Application 1: Connecting the MGP 464 to a Matrix Switcher ......................6-2 Setting up the MGP to work with the switcher ..................................................................6-3 Using the MGP and the matrix switcher after the MGP is synchronized to the matrix switcher ................................................
Résumé du contenu de la page N° 9
MGP 464 Multi-Graphic Processor Chapter One 1 Introduction About This Manual About the MGP 464 Multi-Graphic Processor Features Application Diagrams PRELIMINARY
Résumé du contenu de la page N° 10
Introduction About This Manual This manual discusses how to install, configure, and operate the Extron MGP 464 multi-graphic processor. Throughout this manual, the terms “MGP 464”, “MGP”, “multi-graphic processor”, and “processor” are used interchangeably to refer to all models of the product. About the MGP 464 Multi-Graphic Processor The MGP 464 is a four-window RGB and video signal processor that can display up to four video sources on a single screen in picture-in-picture or picture-by-p
Résumé du contenu de la page N° 11
3:2 pulldown detection for NTSC video and 2:2 film detection for PAL — These advanced film mode processing features help maximize image detail and sharpness for video sources that originated from film. When film is converted to NTSC video, the film frame rate has to be matched to the video frame rate in a process called 3:2 pulldown. Jaggies and other image artifacts can result if conventional deinterlacing techniques are used on film-source video. The MGP 464’s advanced film mode
Résumé du contenu de la page N° 12
ANAHEI M B L VD . ANAHEIM BLVD. EAST S .T EAST ST. Introduction, cont’d Application Diagrams The following application diagrams show examples of how devices may be connected to the MGP 464 and the MGP 464 DI. Remote User and Administration Control Camera Control System TCP/IP Network DVD Extron MGP 464 DI Four Window Preview Multi-Graphic Processor Monitor Projector PC PC PC PC Connection diagram for an MGP 464 DI 1-4 MGP 464 • Introduction RS-232/422 LAN RGB VIDEO INPUTS VIRTUAL VIDE
Résumé du contenu de la page N° 13
A NAHE I M BL VD. EAST ST . Camera Control System TCP/IP Network DVD Preview Extron Monitor MGP 464 Four Window Multi-Graphic Processor Projector Extron CrossPoint Ultra Series Matrix Switcher Video Camera Extron DVD RGB 109xi Interface VTR PC PC Laptop Connection diagram for an MGP 464 (with a CrossPoint Ultra Matrix Switcher) MGP 464 • Introduction 1-5 RS-232/422 LAN RGB VIDEO INPUTS VIRTUAL VIDEO INPUTS R 1 2 3 4 5 8 11 14 17 R R R R VID VID VID VID VID R-Y R-Y R-Y R-Y Y Y Y Y Y RGB/Y, R
Résumé du contenu de la page N° 14
Introduction, cont’d 1-6 MGP 464 • Introduction PRELIMINARY
Résumé du contenu de la page N° 15
MGP 464 Multi-Graphic Processor Chapter Two 2 Installation Installation Overview Mounting the MGP 464 Installing or Replacing Button Labels Rear Panel Features PRELIMINARY
Résumé du contenu de la page N° 16
Installation Installation Overview The MGP 464 processor can be connected to as many as 19 input devices simultaneously, and up to two output devices. Follow these steps to install the MGP 464: 1 Disconnect power to the MGP, and turn off all other devices that will be connected. 2 If desired, mount the MGP. See “Mounting the MGP 464,” below. 3 Attach video input devices to the MGP 464, using the four sets of BNC connectors for the fully configurable inputs and/or the 15 BNC connector
Résumé du contenu de la page N° 17
• Circuit overloading — When connecting the equipment to the supply circuit, consider the connection of the equipment to the supply circuit and the effect that circuit overloading might have on overcurrent protection and supply wiring. Consider equipment nameplate ratings when addressing this concern. • Reliable earthing (grounding) — Maintain reliable grounding of rack- mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circui
Résumé du contenu de la page N° 18
TEXT Installation, cont’d Installing or Replacing Button Labels The button caps are pre-labeled for your convenience by default. However, you can replace them with button labels that you create, using the Button-Label Generator or other button label software. The button assembly consists of a clear lens cap, the button label, and a white diffuser. (See the illustrations 2 Pry the button at right and below.) Remove the button assembly from from the base. the MGP as follows: 1. Make any
Résumé du contenu de la page N° 19
Rear Panel Features The diagram below show the rear panel of the MGP 464 DI, which has four DVI-I input connectors, and the MGP 464 HD-SDI, which has two HD-SDI and two DVI-I input connectors. The standard MGP 464 does not have these DVI/HD-SDI input connectors (although it does have DVI Output and DVI Background connectors). In all other respects the rear panels are identical for all three models. 1 2 3 4 5 6 RS-232/422 LAN RGB VIDEO INPUTS VIRTUAL VIDEO INPUTS R 1 2 3 45 8 11 14 17 R R
Résumé du contenu de la page N° 20
Installation, cont’d Virtual inputs (inputs 5 through 19) — Connect standard definition b component video, S-video, and/or composite video sources to these BNC connectors. The 15 connectors for the virtual inputs are arranged in columns of three BNCs. In each column, you can connect inputs as follows (see the illustration below): • Up to three composite video inputs (can be plugged into any connector[s] in the column) • One S-video input and, optionally, one composite video input The S-
