Résumé du contenu de la page N° 1
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
MINI COMPONENT SYSTEM
CD-DP900E Mini Component System consisting of CD-DP900E (main
unit), CP-DP900H (front speakers), GBOXS0091AWM1 (centre
MODEL
speaker) and GBOXS0092AWM1 (surround speakers).
CD-DP900E
OPERATION MANUAL
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
w
Résumé du contenu de la page N° 2
CD-DP900E Special notes NOTES FOR USERS IN THE U.K. AND IRELAND The mains lead of this product is fitted with a non-rewireable (moulded) Ensure that neither the brown nor the blue wire is connected to the earth plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI terminal in your three pin plug. or ASTA approved BS 1362 fuse marked or and of the same rating as Before replacing the plug cover, make sure that: above, which is also indicated on the pin face of the plug must be
Résumé du contenu de la page N° 3
CD-DP900E Contents Page WARNINGS General Information When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5 present inside the unit. When the ON/STAND-BY button is set at STAND-BY posi- Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 tion, the unit may be bro
Résumé du contenu de la page N° 4
CD-DP900E Precautions Do not remove the outer cover, as this may result General in electric shock. Refer internal service to your lo- Please ensure that the equipment is positioned in a well-ventilated area and cal SHARP service facility. ensure that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 20 cm (8") of free space on the top of the unit. 10 cm (4") 10 cm (4") 20 cm (8") The ventilation should not be imped
Résumé du contenu de la page N° 5
CD-DP900E Accessories Please confirm that the following accessories are included. Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. Do not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark this surface. Keep your discs away from direct sunlight, h
Résumé du contenu de la page N° 6
CD-DP900E Controls and indicators Front panel Reference page 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 4. Bypass Button (with Indicator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 5. Normal Button (with Indicator
Résumé du contenu de la page N° 7
CD-DP900E Display 1. CD Pause Indicator 2. Extra Bass Indicator 124 3567 8 3. Disc Number Indicators 4. Tape 2 Record Indicator 5. FM Stereo Mode Indicator 11 6. FM Stereo Receiving Indicator 12 9 7. Timer Play Indicator 13 8. Dolby Pro Logic Indicator 10 9. CD Play Indicator 14 10.CD Repeat Play Indicator 11.Sleep Indicator 12.Timer Recording Indicator 13.Tape Play Indicator 14.Memory Indicator Rear panel Reference page 1. Cooling Fan 3 2. AC Power Lead . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 8
CD-DP900E Controls and indicators (continued) Front speaker Surround speaker 1 1 2 2 3 3 1. Full-Range Speaker 4 2. Speaker Wire Note: When the surround speakers are hung on the wall, the speaker badge will be turned. In this case, you can adjust the badge to face the proper direction by turn- 1. Tweeter ing it by hand. 2. Woofer 3. Bass Reflex Duct Badge 4. Speaker Wire Centre speaker Note: The speaker grilles are not removable. 1 2 1. Full-Range Speaker 2. Speaker Wire 8 02/1/1
Résumé du contenu de la page N° 9
CD-DP900E Remote control Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 2. Surround Level Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 25 3. Centre Level Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . 25 2 4. Dolby Pro Logic Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5. Balance Control Up and Down Buttons . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 10
CD-DP900E System connections Aerial connection AM loop aerial Supplied FM aerial: FM aerial Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can Transport screw be received. Surround speaker Surround speaker Supplied AM loop aerial: Centre speaker (Right) (Left) Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for opti- mum reception. Place the AM loop aerial on a shelf, etc., o
Résumé du contenu de la page N° 11
CD-DP900E Speaker connection Placing the speaker system Front speakers To enjoy the surround effect, we recommend that you place each speaker as shown Connect the black wire to the FRONT (-) terminal, and the red wire to the FRONT (+) terminal. to the below. Centre speaker Centre speaker Connect the black wire to the CENTER (-) terminal, and the orange wire to the Main unit CENTER (+) terminal. TV Surround speakers Front speaker Front speaker Connect the black wire to the SUR
Résumé du contenu de la page N° 12
CD-DP900E System connections (continued) To mount the surround speakers on the Connecting the AC power lead After checking all the connections have been made correctly, plug the AC power lead wall of this unit into the wall socket. If you plug in the unit first, the unit will enter the dem- The design of the surround speakers allows them to be hung on the wall. Be sure to onstration mode. use the type and size of screw that is shown to the below. Notes: 3.2 mm (1/8") The unit wil
Résumé du contenu de la page N° 13
CD-DP900E Remote control Battery installation Demonstration mode Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). The first time the unit is plugged in, the unit will Batteries are not included. enter the demonstration mode. You will see 1 Remove the battery cover. words scroll. 2 Insert the batteries according to the direction indicated in the bat- tery compartment. To cancel the demonstration mode: When inserting or removing the batteries, push them towards t
Résumé du contenu de la page N° 14
CD-DP900E Sound control Extra bass (X-BASS)/Pre-programmed equaliser (Main unit operation) You can select the extra bass and pre-programmed equaliser modes with the same button on the main unit. Changing the mode: When the EQUALIZER/X-BASS/DEMO button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER/X-BASS/ DEMO button repeatedly until the desired sound mode appears. X-BASS (X-BASS on) Bass frequencies are emphasised. FLAT (X-BASS off)
Résumé du contenu de la page N° 15
CD-DP900E Setting the clock 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. When the 12-hour display is selected, "AM" will change automatically to "PM". 5 Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display. 1 Press the ON
Résumé du contenu de la page N° 16
CD-DP900E Listening to a CD (CDs) This system can also play audio CD-R and CD-RW discs, but cannot record. 5 Some audio CD-R and CD-RW discs may not be playable due to the state of disc or Press the OPEN/CLOSE button to close the disc tray. the device that was used for recording. Total number of tracks on the CD Total playing time of the CD whose whose number is flashing number is flashing 6 To select the CD you want to listen to first, press the DISC SKIP button. 7 Press the / ( )
Résumé du contenu de la page N° 17
CD-DP900E To locate the beginning of a track Starting playback with a desired track You can play a disc starting with the desired track. To move to the beginning of the next track: Press the / button for less than 0.5 seconds during playback. 1 Whilst in the stop mode, press the DISC SKIP button to select the You can skip to any track by pressing the / button repeatedly until the de- desired disc. sired track number appears. 2 Press the / or / button
Résumé du contenu de la page N° 18
CD-DP900E Listening to a CD (CDs) (continued) Repeat play Programmed play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. You can choose up to 32 selections for playback in the order you like. Selected disc number To repeat all tracks on up to 3 discs: 1 Whilst in the stop mode, press the Press the / ( ) button twice. DISC SKIP button to select the de- sired disc. 2 Press the / or / button to select the desired track. Selected track number
Résumé du contenu de la page N° 19
CD-DP900E Listening to the radio Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). 3 Press the TUNING/TIME ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING/TIME button as many times as required to tune in to the de- sired station. Auto tuning: When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning will start automatically and the t
Résumé du contenu de la page N° 20
CD-DP900E Listening to the radio (continued) Memorising a station To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a but- Press the PRESET ( or ) button for less than 0.5 seconds to select ton. (Preset tuning) the desired station. 1 Perform steps 1 - 3 in "Tuning" on page 19. 2 Press the MEMORY/SET button to enter the preset tuning saving mode. Preset channel Frequency and frequency band This can be operated by pressing the TUNE
