Instruction d'utilisation Yamaha NS M325

Résumé du contenu de la page N° 1

English Français Deutsch Español
URGT
Speaker System
NS-M325
OWNER’S MANUAL
Thank you for selecting this YAMAHA NS-M325 speaker system.
PRECAUTIONS
Read this before using the speaker.
• To assure the finest performance, please read this • Do not place the speaker where it is liable to be knocked
manual carefully. Keep it in a safe place for future over or struck by falling objects. Stable placement will
reference. also ensure better sound performance.
• Install the speaker in a cool, dry, clean

Résumé du contenu de la page N° 2

PLACING THE SPEAKERS Place the speakers on a sturdy, vibration-free surface, on a ■ To mount the speaker on a wall by using well-built stand. the attached mounting bracket Fasten screws into a firm wall or wall support as shown ■ Using as 2ch stereo speakers in the figure, and hang the holes of the mounting Better stereo images will be obtained when the speakers bracket on the protruding screws. are slightly angled in towards the listeners. * Make sure that the screws are securely caught by the

Résumé du contenu de la page N° 3

English CONNECTIONS TO YOUR AMPLIFIER Before making connections, make sure that the amplifier is switched off. ■ CONNECTIONS • Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. Tighten Loosen • Connect the (+) terminals on the amplifier (or receiver) and the speakers using one side of the cable. Connect Black (–) Red (+) the (–) terminals on both components using the other side of the cable. +

Résumé du contenu de la page N° 4

REMOVING THE FRONT COVER SPECIFICATIONS The front cover is attached to protect the speaker unit, but Type .............. 2-way acoustic suspension speaker system you can remove it if necessary. Magnetic shielding type The front cover is fixed by magnets. Hold the speaker with Driver ............................................ 10 cm (4”) cone woofer one hand, and pull the front cover gently with the other to 3 cm (1”) dome tweeter remove it. Impedance ..........................................