Résumé du contenu de la page N° 1
HW-F750
Crystal Surround Air Track
(Active Speaker System)
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Résumé du contenu de la page N° 2
features SoundShare SoundShare produces TV sound on your SAT via a Bluetooth connection and controls the sound. HDMI HDMI transmits video and audio signals simultaneously, and provides a clearer picture. The unit is also equipped with the ARC function which lets you listen to sound from your TV via an HDMI cable through the Crystal Surround Air Track. This function is only available if you connect the unit to an ARC compliant TV. 3D Sound Plus The 3D SOUND PLUS feature adds depth and spaciousn
Résumé du contenu de la page N° 3
EnG safety information safety Warnings tO reDUce tHe risK Of eLectric sHOcK, DO nOt reMOVe tHe cOVer(Or BacK). nO User-ser ViceaBLe P arts are insiDe. refer ser Vicing tO QUaLifieD ser Vice PersOnneL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the caUtiOn: TO REDUCE THE RISK OF The exclamation point within the triangle is a triangle are warning signs alerting you to ELECTRIC SHOCK, DO NOT REMOVE THE warning sign alerting you to important dangerous vol
Résumé du contenu de la page N° 4
PrecaUtiOns 2.7 inch 3.9 inch 3.9 inch 3.9 inch Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inch- es). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use
Résumé du contenu de la page N° 5
EnG contents 2 Features featUres 2 License 2 3 Safety warnings safety infOrMatiOn 4 Precautions 3 6 Before reading the user’s manual getting starteD 6 What’s included 6 7 Front/Bottom Panel DescriPtiOns 8 Rear Panel 7 9 Tour of the remote control reMOte cOntrOL 9 10 Installing the wall mount cOnnectiOns 11 Connecting the Wireless Subwoofer 12 Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer 10 12 Looping the power cable around the toroidal core 12 Auto Sound Calibration
Résumé du contenu de la page N° 6
getting started getting started BefOre reaDing tHe User’s ManUaL Note the following terms before reading the user manual. icons used in this manual icon t erm Definition Indicates a situation where a function does not operate or settings may be caution canceled. note Indicates tips or instructions on the page that help you operate a function. safety instructions and t roubleshooting 1) Be sure to familiarize yourself with the Safety Instructions before using this product. (See page 3) 2) If a p
Résumé du contenu de la page N° 7
EnG ● DE descriptions frOnt/BOttOM PaneL VacUUM VOLUMe +/- 1 2 3 4 tUBe aMP scription Displays the current mode. - If there is no input from the product or remote control for 15 DisPLay seconds, the display will turn off automatically. - The display will not tur n off automatically in BT READY, TV READY and USB Playing modes. Connect USB devices such as MP3 players here to the play files UsB POrt on the devices. POWer BUttOn Turns the Crystal Surround Air Track on and off. Selects the D.I
Résumé du contenu de la page N° 8
descriptions rear PaneL 3 4 5 1 2 6 asc in JacK Used to connect the ASC Microphone. Connect the AC power adaptor jack to the power supply jack POWer sUPPL y properly, and then connect the AC power adaptor plug to the wall in outlet. OPticaL in Connect to the digital (optical) output of an external device. aUX in Connect to the Analog output of an external device. Outputs digital video and audio signals simultaneously using an HDMi OUt JacK 5 HDMI cable. Receives digital video and audio signal
Résumé du contenu de la page N° 9
EnG ● EE control remote control tOUr Of tHe reMOte cOntrOL POWER BUTTON TV POWER BUTTON Turns your Samsung TV on and off. Turns the Crystal Surround Air Track on and off. POWER TV POWER SPEAKER SOURCE This button allows you to choose to Press to select a connected SAT listen to audio from the Air track or your AUTO source. (SAT:Surround Air Track) POWER SOURCE SPEAKER TV SOURCE TV. r AUTO POWER mot TV SOURCE Synchronizes the Air Track to a connected SoundShare Press to select a connected
Résumé du contenu de la page N° 10
connections instaLLing tHe W aLL MOUnt You can use the wall mount bracket to mount this unit on a wall. Installation Precautions • Install on a vertical wall only. • For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set. • Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on different wall that can support the unit's weight. • Purchase and use
Résumé du contenu de la page N° 11
EnG ● E STANDBY LINK ID SET cOnnecting tHe WireLess sUBWOOfer The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) automatically when the main unit is turned on. If the LinK indicator does not light when the main unit and subwoofer are turned on, please set the ID by following the procedure below. 1. Plug the power cords of the main unit and subwoofer into an AC wall outlet. 2. Press the ID SET button on the back of the subwoofer
Résumé du contenu de la page N° 12
. 055VA connections attacHing tHe tOrOiDaL ferrite cOre tO tHe POWer cOrD Of tHe sUBWOOfer Attaching the Toroidal ferrite core to the power cord of the subwoofer helps prevent RF interference from radio signals. 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Make two loops around the core with the power cable of the subwoofer. 3. Attach the Toroidal ferrite core to the Subwoofer power cord as the figure shows and press it until it clicks. ID SET LOOPing tHe POWer caBLe ar
Résumé du contenu de la page N° 13
EnG ● E HDMI OUT HDMI IN cOnnecting an eXternaL DeVice Using HDMi caBLe HDMI is the standard digital interface for connecting to such devices as a TVs, projectors, DVD players, Blu-ray players, set top boxes, and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. conn ctions HDMi cable HDMi cable Digital Devices HDMI IN Connect an HDMI cable (not supplied) from the HDMI IN jack
Résumé du contenu de la page N° 14
DC 24V ASC IN DC 24V ASC IN DC 24V ASC IN DC 24V ASC IN HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI IN HDMI IN HDMI IN HDMI IN OPTICAL IN OPTICAL IN OPTICAL IN OPTICAL IN AUX IN AUX IN AUX IN AUX IN connections cOnnecting an eXternaL DeVice Using aUDiO (anaLOg) caBLe Or OPticaL (DigitaL) caBLe This unit comes equipped with one optical in digital jack and one audio analog in jack, giving you two ways to connect it to a TV. OPTICAL OPTICAL IN OUT Optical cable BD/DVD player/ (not supplied) set-t
Résumé du contenu de la page N° 15
EnG ● functions functions INPUT MODE You can select D.IN, AUX, HDMI, BT, TV input or USB input. Press an appropriate button on the remote control to select a desired mode, or press to select one from: D.IN, AUX, HDMI, BT, TV or USB mode. input mode Display Optical Digital input D.IN aUX input AUX HDMi input HDMI BLUetOOtH mode BT tV mode TV POWER TV POWER POWER TV POWER UsB mode USB AUTO SOURCE POWER SPEAKER TV SOURCE SoundShare REPEAT AUTO SOURCE POWER SPEAKER TV SOURCE TV VOL TV CH AU
Résumé du contenu de la page N° 16
functions To connect the Air Track to a Bluetooth device Check if the Bluetooth device supports the Bluetooth compliant stereo headset function. Connect Bluetooth device 1. Press the sOUrce button on the remote control of the AirTrack to display the Bt message. • You will see Wait for 4 seconds and then Bt reaDy on the front display of the Air Track. 2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user manual.) 3. Select the Stereo he
Résumé du contenu de la page N° 17
EnG ● functions To disconnect the Bluetooth device from the Air Track You can disconnect the Bluetooth device from the Air Track. For instructions, see the Bluetooth device's user manual. • The Air Track will be disconnected. • When the Air Track is disconnected from the Bluetooth device the Air Track will display Bt DiscOnnecteD on the front display. To disconnect the Air Track from the Bluetooth device Press the ( ) button on the front panel of the Air Track to switch from Bt to another
Résumé du contenu de la page N° 18
functions 2. When you change the mode of the Air Track to tV, a message asking whether to proceed with Bluetooth pairing is displayed. "[Samsung] AirTrack" appears on the TV screen. 3. Select on the TV screen. The pairing with the Air Track will be completed. • Once the pairing is established, when you change the Air T rack to the TV mode from other input modes, it will automatically connect to the TV. • Changing the Air Track from TV mode to any other mode will cancel the SoundSha
Résumé du contenu de la page N° 19
EnG ● functions • Connect USB devices directly to the USB port of the product. Otherwise, you may encounter a USB compatibility problem. • Do not connect multiple storage devices to the product via a multi-card reader. It may not operate properly. • Digital camera PTP protocols are not supported. • Do not remove the USB device while it is being read. • DRM-protected music files (MP3, WMA) from a commercial web site will not be played. • External HDDs are not supported. • Mobile phone d
Résumé du contenu de la page N° 20
POWER TV POWER AUTO POWER SOURCE SPEAKER TV SOURCE SoundShare REPEAT TV VOL TV CH AUDIO SYNC functions TV MUTE TV INFO TV PRE-CH VT DIMMER POWER TV POWER Muting the sound AUTO SOURCE POWER SPEAKER TV SOURCE POWER TV POWER SoundShare SOUND EFFECT SMART VOLUME VOL REPEAT This is useful when answering a doorbell or telephone call. TV VOL TV CH AUDIO SYNC TV MUTE TV INFO TV PRE-CH VT DIMMER AUTO SOURCE POWER SPEAKER TV SOURCE S/W S/W MUTE 1. To mute the sound of this unit, press the MUTE button
