Instruction d'utilisation Kenwood KVS-50

Résumé du contenu de la page N° 1

Setting up your
Kenwood
KVS Speakers
KVS-50 Center Speaker
KVS-60 Surround Speakers
Only the person or company who
Introduction For your records
originally received the unit can file a
Your Kenwood KVS speakers were Record the serial number (it’s on
claim against the carrier for shipping
designed to meet the demands of the back of the speaker) on the
damage. Keep the original carton
today’s high-quality film soundtracks. warranty card, and in the space
and packing materials in case you
below. If

Résumé du contenu de la page N° 2

Safety First Please read these safety instructions 3 Keep your unit out of extreme 7 Do NOT attempt to service this carefully. They can help prevent hot and cold. Your unit may not unit. You should take the unit to electrical shock, fire, and damage to work properly if it is used at qualified service personnel for the unit. extremely low or freezing repair when: temperatures. Don’t place your CAUTION RISK OF ELECTRIC SHOCK unit near radiators, heat registers, DO NOT OPEN ! • Objects have fallen, o

Résumé du contenu de la page N° 3

Placing the speakers Important KVS-60 Surround Speakers Please wait until you’ve connected • Mount the speakers on the wall all of the cables before plugging the using picture hangers (40 lb test), receiver or amplifier into the AC or place them on shelves. wall outlet and turning it on. (Attach the speaker wire first; see the instruction below). KVS-50 Center Speaker • If you place the speaker on top • Place the speakers directly to the We designed the KVS-50 Center of the TV, place it on its flat

Résumé du contenu de la page N° 4

Connecting speaker wire to Connecting banana or dual- Connecting the KVS-60 banana plugs to the KVS-50 speaker wire Important • Make sure your receiver or 1 amplifier’s power cord is unplugged from the wall outlet before making any connections. 1 • Make sure you connect the positive connections of the speakers to the positive connections of the receiver or amplifier, and the negative connections of the speakers to 2 the negative connections of the receiver or amplifier. If these connections are mis

Résumé du contenu de la page N° 5

Connecting your KVS-50 and KVS-60 speakers KVS-50 Center CENTER KVS-60 Left Surround KVS-60 Right Surround Receiver or amplifier SURROUND 5.

Résumé du contenu de la page N° 6

Specifications Important Due to product upgrades, specifications may be changed without notice. KVS-50 Center Speaker Enclosure: Acoustic suspension Woofers: 5-in polypropylene cone type (2) Tweeter: 3/4-in dome type Crossover frequency: 3.5 kHz Nominal impedance: 8 ohm Power handling: 110 watts Sensitivity: 88 dB Frequency response: 80 Hz – 20 kHz Dimensions Width: 20 in Height: 7 in Depth: 6-3/8 in (including leg bracket) Net weight: 11.1 lbs Enclosure finish: Particle board laminated with PVC sh