Instruction d'utilisation JVC HR-A47U

Instruction d'utilisation pour le dispositif JVC HR-A47U

Dispositif: JVC HR-A47U
Catégorie: Système des hauts-parleurs
Fabricant: JVC
Dimension: 1.35 MB
Date d'addition: 1/15/2014
Nombre des pages: 44
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif JVC HR-A47U. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec JVC HR-A47U.

Pour votre confort

Si regarder l'instruction JVC HR-A47U directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction JVC HR-A47U en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction JVC HR-A47U sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
JVC HR-A47U Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 44 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction JVC HR-A47U - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de JVC HR-A47U. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

T
V
V
O
L

D
S
O
PAUSE
/
FF
OK
R
E
T
3
N
E
+
T
H
V
VIDEO CASSETTE RECORDER
HR-A47U
TV operation n Press and hold
TV button, then press POWER,
TV CH+s–, VOO+ / –VTV / VCR
POWER
TV
TV/VCR A. MONITOR DISPLAY
1 2 3
2
4 5 6
DAILY(M-F) WEEKLY
7 89
C. RESET AUX
CANCEL 0 TIMER 4
START STOP DATE CH
EXPRESS PROGRAMMING
PROG. SKIP
PROG. SP/EP SEARCH
1 CHECK
PLAY
PLAY
POWER
STOP
REW FF
C
SHUTTLE
PLUS
MENU

SP EP
VIDEO AUDIO
VCR
OK CH REC STOP/EJECT PAUSE
SP/EP
LP20878-001
VCR/TV
For Customer Use:
En

Résumé du contenu de la page N° 2

2 EN Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. Declaration of Conformity CAUTIONS Model Number :HR-A47U Trade Name :JVC Responsible Party :JVC Americas Corp. CAUTION Address :1700 Valley Road Wayne, RISK OF ELECTRIC SHOCK DO NOT OPEN N.J. 07470 Telephone Number :973-315-5000 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. This

Résumé du contenu de la page N° 3

EN 3 5. Ventilation IMPORTANT PRODUCT Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or SAFETY INSTRUCTIONS covered. • Do not block the openings by placing the product on a bed, Electrical energy can perform many useful functions. But sofa, rug or other similar surface. improper use can result in potential electrical shock or fire • Do not place the product in a bui

Résumé du contenu de la page N° 4

4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a marked • Do not place this product on an unstable cart, stand, tripod, change in performance and you are unable to restore normal bracket, or table. It may fall, causing serious injury to a child operation by following the detailed procedure in its operating or adult, and serious damage to the product. instructions, do not attempt to service it yourself as opening or

Résumé du contenu de la page N° 5

CONTENTS EN 5 NSTALLING YOUR NEW VCR 6 I IMER RECORDING 24 T Basic Connections ..................................6 Express Timer Programing .......................... 24 Checking program settings .......................................26 Canceling or changing program settings ..................26 NITIAL SETTINGS 8 I When programs overlap each other .........................27 Plug & Play Setting ....................................... 8 Language Setting ..........................................

Résumé du contenu de la page N° 6

INSTALLING YOUR NEW VCR 6 EN Basic Connections ANT. IN (Antenna or cable input) Antenna or cable Coaxial cable Flat feeder Matching transformer AUDIO OUT (not supplied) VIDEO OUT AC Power Cord ANT. IN OUT AUDIO RF OUT VIDEO CH3 CH4 Back of VCR RF OUT AC Outlet Audio/video cable (not supplied) To Audio/video input connectors RF cable (supplied) To 75 ohm terminal TV

Résumé du contenu de la page N° 7

EN 7 Check contents Final preparation for use 1 5 Turn on the VCR and set the CH3-CH4 switch on the Make sure the package contains all of the rear (shown below) to either CH3 or CH4 correctly. accessories listed in “SPECIFICATIONS” (Z pg. c The CH3–CH4 switch is preset to the CH3 39). position. Set to CH4 if CH3 is used for broadcasting in your Situate VCR 2 area. (To view the picture from this VCR through Place the VCR on a stable, horizontal surface. this channel, select the same channel on th

Résumé du contenu de la page N° 8

INITIAL SETTINGS 8 EN This VCR sets the clock and tuner channels automatically when AC power cord is first connected to Plug & Play an AC outlet. The antenna cable must be connected for the Plug & Play setting. The time and date can be set automatically by the clock Setting setting data transmitted from one of the regular TV broadcast channels. We call this TV channel the “host channel” and it is a PBS channel in your area. Auto Clock Set/Auto Tuner Set Perform Plug & Play setup 1 Connect the an

Résumé du contenu de la page N° 9

3 EN 9 This VCR offers you the language choice to view menus and some messages (excluding the on-screen display Language superimposed on the TV screen) — in English, Spanish or French. Select the desired language using the following procedure. Setting The default setting is “ENGLISH”. Access Main Menu screen Turn on the VCR and the TV, and select the VCR 1 channel 3 or 4 (or AV mode) on the TV. Press MENU. Access Initial Set screen 2 On the front panel: MAIN MENU 1 4 Press CH5° to move FUNCTION

Résumé du contenu de la page N° 10

3 INITIAL SETTINGS (cont.) 10 EN Perform clock setting only if the clock has not been set correctly by the Plug & Play setting or if you use a cable Clock Setting box. Access the Clock Set screen to perform the Semiauto or Manual Clock Set. Each procedure starts from step 4 Turn on the VCR and the TV, and select the VCR after preparation steps below are finished. channel 3 or 4 (or AV mode) on the TV. If you use a cable box, set the clock manually. (Z pg. 12) Preparations 1 8 Access Main Menu sc

Résumé du contenu de la page N° 11

EN 11 Setting clock semiautomatically Select D.S.T. mode 6 You have three choices: — Semiauto Clock Set AUTO– Select if you want to adjust your VCR’s You can change the host channel/D.S.T. /time zone clock automatically by the incoming setting manually. signal from the host channel. (Auto First follow steps 1 to 3 on page 10, then go to the Daylight Saving Time*) following steps. ON– Adjustment will be made by the clock itself. Set Auto Clock to ON OFF– Select when Daylight Saving Time does 4 On

Résumé du contenu de la page N° 12

3 INITIAL SETTINGS (cont.) 12 EN Set date 5 8 On the front panel: Press CH5° until the desired date appears, then 4 – 7 press OK. On the Remote: Press SHUTTLE PLUS 5° until the desired date appears, then press OK or SHUTTLE PLUS 3. c Holding CH 5° or SHUTTLE PLUS 5° SP EP VCR changes the date in 15-day intervals. Set year 6 4 – 7 On the front panel: Press CH5° until the desired year appears, then press OK twice. On the Remote: Press SHUTTLE PLUS 5° until the desired year appears, then press

Résumé du contenu de la page N° 13

3 EN 13 Setting channels Tuner Setting automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add Turn on the VCR and the TV, and select the VCR or delete channels, use Manual Channel Set (Z pg. 14). channel 3 or 4 (or AV mode) on the TV. Access Main Menu screen 1 Press MENU. 1 4 Access Tuner Set screen 2 2 3 On the front panel: Press CH5° to move MAIN MENU the highlight bar (arrow) FUNCTION SET to “TUNER SET”

Résumé du contenu de la page N° 14

3 INITIAL SETTINGS (cont.) 14 EN Access Tuner Set screen 1 5 2 On the front panel: Press CH5° to move the highlight bar (arrow) to 2 – 4 “TUNER SET”, then press OK. On the Remote: Press SHUTTLE PLUS 5° to move the highlight bar (arrow) to “TUNER SET”, then press OK or SHUTTLE PLUS 3. SP EP VCR Access Manual Channel Set screen 3 On the front panel: TUNER SET 2 – 4 Press CH5° to move BAND CATV AUTO CHANNEL SET the highlight bar (arrow) =MANUAL CHANNEL SET to “MANUAL CHANNEL SET”, then press O

Résumé du contenu de la page N° 15

3 BASIC PLAYBACK AND RECORDING EN 15 Load a cassette 1 Basic Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Playback Do not apply too much pressure when inserting. c The VCR turns on automatically. c The counter is automatically reset to “0:00:00”. Turn on the VCR and the TV, and select the VCR c If the cassette’s record safety tab has been channel 3 or 4 (or AV mode) on the TV. removed, playback begins a

Résumé du contenu de la page N° 16

3 BASIC PLAYBACK AND RECORDING (cont.) 16 EN Changing display information A Basic Press DISPLAY during playback. Each time you press the button, the front panel display Playback shows the time counter and the clock time alternately. Time Counter Clock Time Features c To display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- C screen display” (Z pg. 21). To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”

Résumé du contenu de la page N° 17

EN 17 Adjusting tracking condition Automatic operations after D E — Tracking Adjustments rewinding — Next Function Memory The Next Function Memory “tells” the VCR what to do Automatic tracking adjustment after rewinding is complete. This VCR automatically adjusts the tracking condition. c Ensure that the VCR is in stop mode. Whenever you insert a tape and start playback, automatic tracking starts working and continuously a– For Automatic Playback Start analyzes the signal to enable optimum pictu

Résumé du contenu de la page N° 18

3 BASIC PLAYBACK AND RECORDING (cont.) 18 EN Locating beginning of F recordings — Index Search Index codes are placed on the tape at the beginning of each recording when recording on this VCR. You can find and automatically play back from the beginning of G any recording using the Index Search function. 1 2 3 2 1 Start search 4 5 6 While the tape is not running, press SHUTTLE PLUS 4 or ¢ on the Remote. 7 89 4 0 2 Access distant code To access a recording of 2 to 9 index codes away, press SHUTTL

Résumé du contenu de la page N° 19

3 EN 19 Load a cassette 1 Basic Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. Recording Select recording channel 2 Turn on the VCR and the TV, and select the VCR On the front panel: channel 3 or 4 (or AV mode) on the TV. Press CH5°. On the Remote: FF ( Á ) a– Press CH + or –. PLAY ( 3 ) or POWER b– Press the Number keys. REW ( 1 ) c If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so t

Résumé du contenu de la page N° 20

3 BASIC PLAYBACK AND RECORDING (cont.) 20 EN Changing display information A Basic Press DISPLAY during recording or recording pause. Each time you press the button, the front panel display Recording shows the time counter, channel number and the clock time in sequence. Features Time Counter Channel No. Clock Time STOP/EJECT ( 7 / 0 ) c To display the VCR status including the time counter, channel number, and the clock time on the TV screen, see “Showing on-screen display” (Z pg. 21). To reset t


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 JVC CA-FSX3 Manuel d'utilisation Système des hauts-parleurs 23
2 JVC CA-HXD77 Manuel d'utilisation Système des hauts-parleurs 13
3 JVC CA-FSP5 Manuel d'utilisation Système des hauts-parleurs 0
4 JVC CA-HXGD7 Manuel d'utilisation Système des hauts-parleurs 9
5 JVC CA-HXZ1R Manuel d'utilisation Système des hauts-parleurs 55
6 JVC CA-FSX1 Manuel d'utilisation Système des hauts-parleurs 20
7 JVC CA-HXGD8 Manuel d'utilisation Système des hauts-parleurs 9
8 JVC CA-HXC6 Manuel d'utilisation Système des hauts-parleurs 2
9 JVC CA-DXJ35 Manuel d'utilisation Système des hauts-parleurs 21
10 JVC AX-UXG6 Manuel d'utilisation Système des hauts-parleurs 46
11 JVC CA-MXJ200 Manuel d'utilisation Système des hauts-parleurs 14
12 JVC CA-MXJ100 Manuel d'utilisation Système des hauts-parleurs 25
13 JVC CA-HXZ1 Manuel d'utilisation Système des hauts-parleurs 48
14 JVC CA-MXGT90 Manuel d'utilisation Système des hauts-parleurs 6
15 JVC CA-MXJ880V Manuel d'utilisation Système des hauts-parleurs 1
16 Sony CDX-565MXRF Manuel d'utilisation Système des hauts-parleurs 30
17 Sony CMT-CP333 Manuel d'utilisation Système des hauts-parleurs 11
18 Sony CMT-CP505MD Manuel d'utilisation Système des hauts-parleurs 14
19 Sony CMT-DC500MD Manuel d'utilisation Système des hauts-parleurs 16
20 Sony CMT-DF1 Manuel d'utilisation Système des hauts-parleurs 7