Instruction d'utilisation Sinclair BRIGHTON SERIES SW10.3

Résumé du contenu de la page N° 1

BrightoN
SERIES
SW8.3 SW10.3
Powered Subwoofer Instruction Manual
Congratulations…
…for purchasing a Brighton series subwoofer by Sinclair Audio.
When used with your current Audio/Home-Theatre system, a Brighton series subwoofer
will deliver all the realism and excitement present in today’s music and film digital
soundtracks.
This subwoofer has been designed to give you many years of trouble-free listening
enjoyment. Though easy to install, we recommend that you read carefully

Résumé du contenu de la page N° 2

IMPORTANT SAFETY PRECAUTIONS The exclamation point within an equilateral The lightning flash with arrowhead, within an CAUTION: triangle is intended to alert the user of the TO PREVENT THE RISK OF ELECTRIC SHOCK, equilateral triangle, is intended to alert the user of presence of important operating and the presence of uninsulated "dangerous voltage" DO NOT REMOVE COVER (OR BACK). NO maintenance (servicing) instructions in the within the product's enclosure that may be of suf- USER SERVICABLE PA

Résumé du contenu de la page N° 3

Safety Instructions • We recommend that the subwoofer be unplugged from the wall during lightning storms, and when not used for an extended period of time. • Do not use wherever there is a risk that the subwoofer may come into contact with water or excessive moisture such as near pools, bathtubs and wet basements. • In the event of a malfunction, do not attempt to service the product yourself. Please contact your Sinclair Audio dealer. Before making connections to your receiver/processor, pl

Résumé du contenu de la page N° 4

Step 2 Connecting The Subwoofer A) Line Level Connection (known as "Low-Level"): Connect the audio/video receiver or processor’s subwoofer output, to the Sinclair Audio Subwoofer’s input. Subwoofer Subwoofer Line-Level/Low-Level Input + - B) Speaker Level Connection, known as "High-Level". (SW 8.3 only) Connect the audio/video receiver’s Left/Right main channel outputs to the Sinclair Audio L/R Speaker Level Inputs. Make sure to connect "+" (Red) to "+" ( Red), and "-" ( Black) to "- " (Black).

Résumé du contenu de la page N° 5

Step 3 Powering Up A) On/Auto/Off Switch: Your subwoofer has an On/Off switch. Once connected to your receiver and plugged into the wall outlet, the Sinclair Audio subwoofer will need to be turned on and can be left in the “auto” position so that once it senses a signal coming from your receiver, it will automatically turn on and will turn off into Standby mode after it does not sense a signal for 5 minutes. Setting the Volume The volume of the subwoofer can be controlled by pushing lightly on t

Résumé du contenu de la page N° 6

50Hz-140Hz This setting gives satellite and small bookshelf speakers the impact required to fill a room with deep bass. If the loudspeakers in the system are equipped with woofers that are 4" or smaller, this is the recommended setting. This setting will reinforce the bass response in the 50Hz to 140Hz range. 40Hz-100Hz This setting gives bookshelf and medium sized speakers a deep, rich bass effect. If the loudspeakers in the system are equipped with woofers that are 5-6", this is the recommende