Instruction d'utilisation Klipsch P-312W

Résumé du contenu de la page N° 1

Palladium® P-312W
Owner’s Manual

Résumé du contenu de la page N° 2

Getting Started Important Safety Instructions 1. READ these instructions. The exclamation point, within an equilateral 2. KEEP these instructions. triangle, is intended to alert the user to 3. HEED all warnings. the presence of important operating and Unpacking 4. FOLLOW all instructions. maintenance (servicing) instructions in the 5. DO NOT use this apparatus near water. literature accompanying the product. This subwoofer is heavy! Do not lift or move this subwoofer by yourself. Always have

Résumé du contenu de la page N° 3

Preparing the Loudspeaker Positioning Subwoofers Never allow objects or furniture to impede the subwoofer or place objects on top of it! Connection Procedure: There is a specific procedure to be followed: 6’ - 16’ • Switch off and unplug the amplifier/s and all source electronics from the mains power. LFE 2 LFE 1 • Place the subwoofer in the general area where you want it. • Connect the subwoofer following the instructions under the “connecting the subwoofer” section of this manual. • Finali

Résumé du contenu de la page N° 4

Connecting the Subwoofer Features and Controls Caution: Turn off your preamplifier/receiver and your subwoofer before making any connections! Touch Panel Controls All of the subwoofer’s controls and settings are Inputs and Outputs accessed through the touch-panel key pad and display located on the top of the subwoofer’s Line In cabinet. The only exception to this is the main AC Your Palladium Series powered sub- power switch, which is located on the rear panel woofer is connected via line-l

Résumé du contenu de la page N° 5

Features and Controls - 2 Features and Controls - 3 EQ Mode Room Correction This screen is used to select two different bass emphasis settings titled “Punch” and “Depth”. They are designed This screen is used to activate the automatic Adaptive Room Correction (ARC) feature. Plug the supplied to complement different types of program material, such as movie soundtracks or music. The “Punch” setting microphone into the “MIC IN” jack on the subwoofer’s rear panel and place it in the intended listen

Résumé du contenu de la page N° 6

Features and Controls - 4 Back Panel Features This section describes the features and connections found on the amplifier on the back panel of the subwoofer. Keypad Lock It also describes the manner for connecting a second subwoofer as a “slave” unit to the primary subwoofer. This screen is used to lock the keypad and prevent unintentional changes to your settings by other users. After making all desired adjustments, press the Enter key to lock the keypad. “Keypad Locked Hold   to Unlock” Po

Résumé du contenu de la page N° 7

Remote Control Operation About Your Loudspeaker This section describes the features found on the supplied remote control for your Palladium P-312W subwoofer. An International Project The remote control works via infrared and, as such, will need a clear line of sight to the infrared receiver located The Klipsch Palladium Series has drawn on engineering, design and manufacturing resources from all over the on the lower right quadrant of the front panel. The remote will work with or without the

Résumé du contenu de la page N° 8

Conclusion Care and Maintenance FCC AND CANADA EMC COMPLIANCE INFORMATION Very little maintenance is required. To maintain the finish of the loudspeakers, wipe them carefully with a soft NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant lint-free polishing cloth. Occasionally, and to remove fingermarks etc., wipe the cabinets with a barely damp to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag

Résumé du contenu de la page N° 9

3502 Woodview Trace, Suite 200 Indianapolis, Indiana 46268 USA 1.800.KLIPSCH • www.klipsch.com www.klipsch.com/palladium