Instruction d'utilisation JBL MARINE MPS1000

Résumé du contenu de la page N° 1

MPS1000
MARINE POWERED
SUBWOOFER
OWNER’S MANUAL
www.jbl.com
The Official Brand of Live Music.

Résumé du contenu de la page N° 2

INSTALLATION THANK YOU CHOOSING A MOUNTING LOCATION CONNECTIONS ® for choosing the JBL MPS1000. In order that we may better serve Choose a mounting location that doesn’t interfere with walkways, About Power and Ground Connections: you should you require warranty service for your new subwoofer, seats or the operation of steering, control or safety mechanisms. The The red B+ wire and the black ground wire should be connected directly please retain your original purchase receipt and register your

Résumé du contenu de la page N° 3

CONTROLS AND FUNCTIONS The MPS1000 has several controls and indicators that simplify sonic Figure 7. MPS1000 controls on the front panel TUNING THE MPS1000 integration with the rest of the speakers on your boat. To gain access 1. Make sure the head unit is off and its volume control is set to to the controls, you must remove the cover and the water-tight minimum. rubber plug underneath. To remove the cover, remove the two small 2. On the MPS1000’s front panel, set the Gain control to the midpoi

Résumé du contenu de la page N° 4

TROUBLESHOOTING SPECIFICATIONS SYMPTOM LIKELY CAUSE SOLUTION MPS1000 13" 331mm 10" (250mm) Marine Powered Subwoofer Power LED is not lit. Fuse is blown. Fuse should be replaced. • Amplifier Power: 250W RMS Head unit is not Check remote voltage, and power, • Frequency Response: 40Hz – 100Hz functioning properly. ground or remote connections. The • Signal-to-Noise Ratio: 81.1dB MPS1000 is designed to shut off if • Fuse: 30A the battery voltage falls below 10V. • Max. Current Draw: 14A This is t