Résumé du contenu de la page N° 1
Box
IP8155/65HP Network Camera
User’s Manual
1.3/2MP • WDR Pro • Remote back Focus
Rev. 1.0
Résumé du contenu de la page N° 2
VIVOTEK Table of Contents Overview ����������������������������������������������������������������������������������������������������������������������������������������������������� 4 Revision History �������������������������������������������������������������������������������������������������������������������������������������� 4 Read Before Use ����������������������������������������������������
Résumé du contenu de la page N° 3
VIVOTEK URL Commands for the Network Camera ������������������������������������������������������������������������������������������������ 133 Technical Specifications ��������������������������������������������������������������������������������������������������������������������������� 226 Technology License Notice �������������������������� ��������������������������������������������������������������������������������������������� 227 Electromagnetic Compatibility (EMC) �������������
Résumé du contenu de la page N° 4
VIVOTEK Overview VIVOTEK IP8155HP and 8165HP is a professional box network camera series offering up to 60 fps @ 1�3- or 2-Megapixel resolution with superb image quality � Featuring the new improved Wide Dynamic Range Technology WDR Pro II, (WDR Pro for IP8165HP), it provides extreme visibility in high light contrast environments with 4-shutter capture method� Combined with 3D Noise Reduction Technology, which enables the IP8155HP to capture clear, polished video under low-light conditions
Résumé du contenu de la page N° 5
VIVOTEK Read Before Use The use of surveillance devices may be prohibited by law in your country� The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system� It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use� It is important to first verify that all contents received are complete according to the Package Contents listed below� Take note of the
Résumé du contenu de la page N° 6
VIVOTEK Physical Description Front Panel Light Sensor Lens Rear Panel Recessed Reset Button Microphone In Audio Out SD/SDHC Card Slot Focus Assist Button Ethernet 10/100 RJ45 General I/O Terminal Block Socket Status LED NTSC/PAL Switch BNC Video Out 6 - User's Manual
Résumé du contenu de la page N° 7
VIVOTEK Lens Zoom Controller Focus Controller Mounting the Lens to the Camera 1� Mount the lens by turning it clockwise onto the camera mount until it stops� 2� Connect the P-iris control cable to the socket� 2 1 User's Manual - 7
Résumé du contenu de la page N° 8
VIVOTEK General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. The “AC/DC pw” pins can be used to connect both 24V AC and 12V DC power source� DO+ DO- DI1+ DI2+ DI3+ DI- (common GND) RS485- RS485+ AC/DC pw AC/DC pw DI/DO Diagram Please refer to the following illustration for the connection method� 12V +12V Power+12V Digital input Digital output Ground GND GND VDC
Résumé du contenu de la page N° 9
VIVOTEK Hardware Reset Recessed Reset Button The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain after reset, restore the factory settings and install again� Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the Network Camera to reboot� Restore: Press and hold the recessed reset button until the status LED rapi
Résumé du contenu de la page N° 10
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment General Connection (with PoE) 1. If you have external devices such as sensors and alarms, connect them to the general I/O terminal block� 2� Connect the camera to a switch via Ethernet cable� 3� Connect the power cable from the Network Camera to a power outlet� 1 DO+ � 2 DO- � 3� DI1+ 4 DI2+ � 5� DI3+ 6� DI- (common GND) 1 2 7� RS485- 8: RS485+ 9. AC/DC pw 10. AC/DC pw PoE Switch NOTE: 1 � The camera is only
Résumé du contenu de la page N° 11
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Internet connection via a router Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below� 1 Connect your Network Camera � behind a router, the Internet environment is illustrated below � Regarding how to obtain your IP address, please refer to Software Installation on page 13 for details� IP address : 192.168.0.3 WAN (Wide Area Network ) Subnet mask : 255.255.255.0 Router IP addre
Résumé du contenu de la page N° 12
VIVOTEK Configure the router, virtual server or firewall, so that the router can forward any data com- ing into a preconfigured port number to a network camera on the private network, and allow data from the camera to be transmitted to the outside of the network over the same path � From Forward to 122.146.57.120:8000 192.168.2.10:80 122.146.57.120:8001 192.168.2.11:80 ��� ��� When properly configured, you can access a camera behind the router using the HTTP request as follows: http://122.1
Résumé du contenu de la page N° 13
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� IW2 1� Install IW2 under the Software Utility directory from the software CD� Installation Double-click the IW2 shortcut on your desktop to launch the program� Wizard 2 2 � The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3�
Résumé du contenu de la page N° 14
∞ VIVOTEK Ready to Use 1� A browser session with the Network Camera should prompt as shown below� 2� You should be able to see live video from your camera � You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras� For its installation details, please refer to its related documents� 3. Unscrew the zoom controller to adjust the zoom factor. Upon completion, tighten the zoom controller� 4� Unscrew the focus controller to adjust
Résumé du contenu de la page N° 15
VIVOTEK NOTE: When choosing the lens for your camera, please notice the specifications as below. The screw mount (distance A-C) must be shorter than 5�2mm; in case that the bottom of screw mount may hit the IR Cut Filter� A C User's Manual - 15
Résumé du contenu de la page N° 16
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN. If your network environment is not a LAN, follow these steps to access the Netwotk Camera: ® 1 Launch your web browser (e � g � �, Microsoft Internet Explorer or Mozilla Firefox). 2. Enter the IP address of the Net
Résumé du contenu de la page N° 17
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera� For more information about how to enable password protection, please refer to Security on page 81� ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser� 1 Choose � Tools > Internet Options > Security > Custom Level� ® 2. Lo
Résumé du contenu de la page N° 18
VIVOTEK IMPORTANT: 1. Currently the Network Camera utilizes 32-bit ActiveX plugin. You CAN NOT open a management/view session with the camera using a 64-bit IE browser. 2. If you encounter this problem, try execute the Iexplore.exe program from C:\Windows\ SysWOW64� A 32-bit version of IE browser will be installed� 3. On Windows 7, the 32-bit explorer browser can be accessed from here: C:\Program Files (x86)\Internet Explorer\iexplore.exe NOTE: 1. For a megapixel camera, it is recommended
Résumé du contenu de la page N° 19
VIVOTEK Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming� Quick Time Player VLC media player VLC media player 1 Launch the R � TSP player � mpegable Player 2 Choose File > Open URL � � A URL dialog box will pop up� 3. The address format is rtsp://:/ As mo
Résumé du contenu de la page N° 20
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 10� To utilize this feature, please check the following settings on your Network Camera: 1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
