Résumé du contenu de la page N° 1
NETWORK CAMERA
Model:
IK-WB30A
User's Manual
For information on our latest products and peripheral devices, refer to the
following Website:
http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com/
tai/products/prod_biz.jsp).
Résumé du contenu de la page N° 2
Table of Contents Introduction .................................................................................................................................................................. 4 Important Safeguards .................................................................................................................................................. 6 Important Safeguards (Cont.) ..
Résumé du contenu de la page N° 3
Audio .................................................................................................................................................................. 112 Day / Night setting .............................................................................................................................................. 112 Recommended system requirements ................................................................................................................. 112 Specificati
Résumé du contenu de la page N° 4
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However
Résumé du contenu de la page N° 5
Thank you for purchasing the IK-WB30A Network Camera. Before you start using the camera, read this User's Manual carefully to ensure correct usage. Once you have finished reading this User's Manual, keep it in a convenient place for future reference. The design, specifications, software, and User's Manual contents are subject to change without prior notice. Terms and Trademarks ● The term "OS" is used in this User's Manual to indicate operating systems compatible with this product. ® ® ® − Win
Résumé du contenu de la page N° 6
Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating and use instructions. 5. Cleaning Disconnect this video product from the power supply before cleaning. 6. Attachments Do not use attachments not recommended by the v
Résumé du contenu de la page N° 7
13. Lightning For additional protection on this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the video product due to lightning and power-line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid electric shock. 14. Overloading Do not overload the power supply or extension cords as th
Résumé du contenu de la page N° 8
Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral tri
Résumé du contenu de la page N° 9
Notes on Use and Installation ● Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. ● Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. ● Treat the camera with care Dropping or subjecting the camera to intense vibration may cause it to malfunction. ● Never touch internal parts Do not touch the internal parts of the camera other t
Résumé du contenu de la page N° 10
Precautions for Use Disclaimer We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions. 2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited to loss of expected income and suspension of busine
Résumé du contenu de la page N° 11
AC Adapter Be sure to use only the supplied AC adapter. Using a different AC adapter may cause the camera to malfunction, heat up, or catch fire. Before using the AC adapter, carefully read and observe the Important Safeguards ( → page 6) and the notes below. ● Plug the AC adapter into the 100-240V AC outlet. If inserting it into other than 100-240V AC outlet, it may result in electric shock or fire hazard. ● Do not repair, modify or disassemble the AC adapter. It may result in electric shock o
Résumé du contenu de la page N° 12
Specifications AC adapter (DSA-20P-10) Power source : 100-240V AC 50/60 Hz Rated output : 12V DC, 1.5 A Ambient temperature guaranteed for performance : 32°F to 104°F (0°C to 40°C) Storage temperature : -4°F to 140°F (-20°C to 60°C) Maximum external dimensions : 1.42 x 1.85 x 2.93 inches (36 x 47 x 74.5 mm) (width x height x depth) Cord length : 72 inches (1828 mm) 12
Résumé du contenu de la page N° 13
Package Contents IK-WB30A AC Adapter Cord length: 72 inches (1828 mm) Quick Start Guide and Important Software CD Safeguards NETWORK CAMERA IK-WB30A Model: IK-WB30A Quick Start Guide and Important Safeguards Content: This guide describes the hardware installation. User's Manual Quick Installation Guide Refer the user's manual (PDF file) contained in the CD-ROM for settings, operations and other information. Installation Wizard The application Adobe Reader is needed to see PDF
Résumé du contenu de la page N° 14
Physical Description Front Panel CS Lens Mount Ring Light Sensor Built-in Microphone Back Panel Audio Out SD/SDHC Card Slot Status LED Microphone In Ethernet 10/100 RJ45 Socket Power Cord Socket Fixing Hole Recessed Reset Button General I/O Terminal Block External/Internal MIC Switch General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. Pin Name 1 12V DC Output When y
Résumé du contenu de la page N° 15
The connection definition is as below when "Digital input" is used for alarm input. RS485 connection IK-WB30A Twisted pair line RS485 + Rx + RX - RS485 - Rx + Rx - PTZ driver PTZ scanner Status LED The LED indicates the status of the Network Camera. Item LED status Description Steady Red Power on and system booting 1 Red LED unlit Power off Steady Red + Blinking Green every 1 sec. Network connected (heartbeat) 2 Steady Red + Green LED unlit Network disconnected 3 Steady Red + Blinking Green every
Résumé du contenu de la page N° 16
Hardware Reset Status LED Recessed Reset Button The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after resetting, restore the factory settings and install again. Reset: Press about 2 seconds and release the recessed reset button with a paper clip or small object. And the Status LED (Green and Red) is unlit . Wait for the Network Camera to reboot. Resto
Résumé du contenu de la page N° 17
PAR TITION LINK RE C E IV E POWE R COLLISION 1 2 3 4 5 Installation Hardware Installation Please verify that your product package contains all the accessories listed in the Package Contents listed on page 13. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5. Hardware Installation is shown in the Quick Start Guide(QSG). Please refer to 13 pages of QSG. Network Deployment In this user’s ma
Résumé du contenu de la page N° 18
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router. ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to your router’s user’s manual. 3.
Résumé du contenu de la page N° 19
Software Installation Installation Wizard (IW), a free-bundled software packaged in the product CD, helps to set up your Network Camera in a LAN. 1. Install the IW under the Software Utility directory from the software CD. Installation Wizard Double click the IW shortcut on your desktop to launch the program. 2. The program will analyze your network environment. After your network environment is analyzed, please click Next to continue the program. 3. The program will search for Network Ca
Résumé du contenu de la page N° 20
Ready to Use 1. Access the Network Camera on the LAN. 2. Retrieve live video through a web browser. 20
