Résumé du contenu de la page N° 1
W Wi ide Dynamic Range de Dynamic Range
Dome Camera
CVC624WDR
200 200 N New H Hi igh hway
Amityville, NY 11701
631-957-8700
www.specotech.com
Résumé du contenu de la page N° 2
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE REF E R S E R V ICI NG TO QUALIFIE D SE SER RV VIIC CE E P PE ERS RSO ON NNE NEL L . ______________ _ The lighting flash with an arrowhead symbol, within an equilateral triangle is Intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitud
Résumé du contenu de la page N° 3
CONTENTS Package Contents 4 Precautions 5 Camera Installation 6-7 Features 8 OSD Menu Tree 9 OSD Menu Details 10-12 Troubleshooting 13-14 Specifications 15 Dimensions 16 Warranty 17 3
Résumé du contenu de la page N° 4
PACKAGE CONTENTS Please make sure that the following items are included in the package: 1 CVC624WDR Camera 2 Mounting Screws 1 Video Test Connector Please leave this manual with the end-user for future reference. COMPATIBILITY “A” type Box DFM Series Electrical Box is not included in the ppg ackage but Is compatible with the camera 4
Résumé du contenu de la page N° 5
PRECAUTIONS • THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL • TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE • DO NOT CLEAN THE DOME COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE DOME COVER • THERE ARE NO USER-SERVICEABLE PARTS INSIDE. PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN TO MAKE INITIAL ADJUSTMENTS • • PLEA PLEASE SE USE USE A A UL UL A APPROVED PPROVED REGULA REGULATED TED 12 12 VOLT VOLT D DC C
Résumé du contenu de la page N° 6
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 500 mA) Power Input :RED Center : (+) DC 12V Power Supply 2. CONNECT VIDEO CABLE -CONNECT CONNECT BNC BNC C CABLE ABLE T TO O T TH HE E BNC BNC J JACK ACK. 6
Résumé du contenu de la page N° 7
CAMERA INSTALLATION MECHANICAL (2) JOY STICK (1) Vari-focal Lens (3) Video Test Terminal (1) VARI-FOCAL LENS Adjust between T W (TELE WIDE) to set the angle (focal length). Set the focus by adjusting ∞ N NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES". (2) JOY STICK TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY STICK FOR ONE SECOND AND SET AS DESCRIBED IN THE MANUAL (3) VIDEO TEST TERMINAL 7
Résumé du contenu de la page N° 8
FEATURES 1. Superior Wide Dynamic Image Quality It has very Wide Dynamic Range by using the Pixim ORCA Chip Set. Film-like colors are achieved under various Light conditions even in High Dynamic range scenes , Dynamic Range achieves a maximum of 120dB. 2 2. D Digital igital Pixel Pixel Sy System stem Each pixel is processed independently to get clear and usable images. 3. OSD control Every function is controlled by OSD menu - Automatic white balance - Automatic gain control (max 60dB) - Slow shu
Résumé du contenu de la page N° 9
OSD MENU TREE SPECO MAIN MENU PRESETS DEFAULT / INDOOR / OUTDOOR / CUSTOM SET UP ID DISPLAY ID : (OFF / ON) CAMERA ID : 8 CHARACTER ID POSITION : (UP-LEFT / UP-CENTER / UP-RIGHT DOWN-LEFT / DOWN-RIGHT) LENS SELECT DC MANUAL WDR AUTO OFF MANUAL : (WDR BIAS Range -20 to 20 / WDR RANGE 0 to 36) WB CONTROL ATW(Range 2K~11K) AWB MANUAL (Range 2K ~11K) LOW LIGHT SLOW SHUTTER : (SHUTTER LIMIT Range OFF~X32 / AGC CONTROL Range 0 to 60) AUTO D/N SPECIAL VIDEO : (NTSC / PAL) FLIP FLIP : : ( (OF OFF F //
Résumé du contenu de la page N° 10
OSD MENU DETAILS 1. OSD MENU ENTER / EXIT A. OSD MENU ENTER • Push Center Key for 2 seconds B. OSD MENU EXIT • Press EXIT Menu from Main Menu • If Pressing Set Key for 2 seconds from Main Menu appears. In this case, just press Set Key. C. 'SAVE' and 'QUIT‘ • Left or Right Key - Selecting Menu • Up or Down Key - Returning to Menu 1. Press the SET key to access the main setup mode. 2. Select the desired feature using the UP or Down key. 3 3. C Chang hange e tthe he status status of of the the
Résumé du contenu de la page N° 11
OSD MENU DETAILS C. LENS • MANUAL : Use Manual lens Only. D. WDR • WDR (Wide Dynamic Range) : You can adjust the desired WDR BIAS from -20 to 20 and WDR RANGE from 0 to 36 E E. WB WB CONTROL CONTROL • ATW (Auto Tracking White Balance) : The camera automatically control the white balance in any environment. • AWB (Auto White Balance) : The white balance is automatically adjusted in a specific environment. • MANUAL : Users can adjust the colors by adding or reducing the WB level. You can adjust
Résumé du contenu de la page N° 12
OSD MENU DETAILS • BACK LIGHT : BACK LIGHT ADJUST or SELECT AREA • RESOLUTION : Select Resolution of CCD or PIXIM • COLOR MODE : COLOR or B/W SELECTION • SHARPNESS : ON (You can adjust the desired Sharpness form - 8 to 8) or OFF H. EXIT MENU • EXIT NO CHANGES : No change • SAVE SAVE NEW NEW A AND ND EXIT EXIT :: Save Save c change hange • RESTORE FACTORY SETTINGS : Factory default • RELEASE VERSION I. PREVIOUS PAGE • PREVIOUS PAGE : Return page Pixim’s patented Digital Pixel System (DPS) techno
Résumé du contenu de la page N° 13
TROUBLESHOOTING If If y yo ou u have have ttrouble rouble operating operating y your our camera camera, refer refer tto o tthe he follow followiing ng Problem Solution Nothing appears on ● Check that the power cord and line connection the screen. between the camera and monitor are correct ● Check that yyp ou have prop perly y connected VIDEO cable to the camera VIDEO output jack. The image on the ● Is the lens stained with dirt? Clean your lens with soft clean cloth. screen is dim. ● Set the m
Résumé du contenu de la page N° 14
TROUBLESHOOTING Problem Solution The color of the ● Check that you have properly set the picture is not ‘ WHITE BALANCE ’ menu proper. The image on the ● Is the camera facing to direct sunlight or fluorescent screen flickers. lighting? Change the camera position. 14
Résumé du contenu de la page N° 15
SPECIFICATIONS Siggy nal System NTSC 1/3 inch Pixim ORCA CMOS (Dramatic Pick-up Device Dynamic range sensor) Total of pixels 742(H) x 552(V) Horizontal Resolution 540 Horizontal TV Lines (color) Vertical Resolution 460 VTVL Scanning System 525 Iines interlaced / 625 Iines interlaced Synchronization Internal Video Output 1.0Vp-p/75 ohm Composite Sensitivity 0.08Lux (DSS on) with F1.2 Lens S/N Ratio 53dB or more Dynamic range 120dB(max), 102dB(typical) Shutter Speed 1/60 - 1/100,000 / 1/50
Résumé du contenu de la page N° 16
DIMENSIONS * SIDE VIEW * TOP VIEW 16
Résumé du contenu de la page N° 17
WARRANTY 17
Résumé du contenu de la page N° 18
MEMO
Résumé du contenu de la page N° 19
MEMO
Résumé du contenu de la page N° 20
200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com Rev. 100317 Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation.
