Résumé du contenu de la page N° 1
VLB11SCSFF
550 Line Color Bullet Camera
Focus Free
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
Résumé du contenu de la page N° 2
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK D O N O T R E M O V E C O V E R ( O R B A C K ) . N O U S E R S E R V I C E A B L E P A R T S I N SIDE R E F E R S E R V I C I N G T O Q U A L I F I E D S E R V I C E P E R S O N N E L . _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The lighting flash with an arrowhead symbol, within an equilateral triangle is Intended to alert the user to the presence of un-insulated “dangerous voltage” within the
Résumé du contenu de la page N° 3
CONTENTS Package Contents 4 5 Precautions 6-9 Camera Installation 10-11 Features 12 OSD Menu Tree 13-15 OSD Menu Details 16-17 Troubleshooting 18 LED Pattern 19 Specifications Dimensions 20 Warranty 21 3
Résumé du contenu de la page N° 4
PACKAGE CONTENTS Please make sure that the following items are included in the package: 1 VLB11SCSFF Camera 3 Mounting Screws 1 Video test Connector 1 Wrench Please leave this manual with the end-user for future reference. 4
Résumé du contenu de la page N° 5
PRECAUTIONS • THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL • TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE • DO NOT CLEAN THE COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE COVER • THERE ARE NO USER-SERVICEABLE PARTS INSIDE. PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN TO MAKE INITIAL ADJUSTMENTS • PLEASE USE A UL APPROVED REGULATED 12 VOLT DC POWER SUPPLY • PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABL
Résumé du contenu de la page N° 6
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 500 mA) Power Input :RED Center : (+) DC 12V Power Supply 2. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK. 6
Résumé du contenu de la page N° 7
CAMERA INSTALLATION CONTROL BOARD 2 3 1 1) Video Test Terminal For second video output 2) OSD (On Screen Display) Joy stick Press the Joy stick for one second until the OSD menu tree appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions. 3) Lens adjustment (for Zoom) Joy stick Adjust the Joy stick left or right to control between TELE & WIDE, Focus is automatically matched without any adjustment. 7
Résumé du contenu de la page N° 8
CAMERA INSTALLATION COMPATIBILITY “A” type Box “B” type Box CVCTPEXT CVCTPLATE [CVCTPLATE Hole Description] Hole 1 : CVCTPEXT Hole 2 : Electrical Box “B” type Hole 3 : Electrical Box “A” type 8
Résumé du contenu de la page N° 9
CAMERA INSTALLATION COMPATIBILITY BCP ( USING 7246WMT) CVCTPEXT CVCTPLATE BCP (Direct connection ) 9
Résumé du contenu de la page N° 10
FEATURES FOCUS FREE With 3.7~10mm FOCUS FREE Auto Iris Motorized Zoom Lens, Focus can be automatically set up by adjusting zoom position. No more trips back to the installation to re-focus the camera. Reduces installation time and service calls. High Resolution Horizontal resolution of 550 TV lines is achieved by using a SONY Super-HAD CCD with 410,000 pixels, and a custom DSP yielding pictures with a high S/N ratio.. DAY/NIGHT The camera can show color pictures in all lighting conditions. Or y
Résumé du contenu de la page N° 11
FEATURES HLC (High Light Compensation) This function reverses bright spots in the picture (such as headlights). It enables the entire system to do a better job of resolving and displaying grayscale information such as a license plate. FREEZE This function freezes the current scene for detailed viewing. PRIVACY It also has the ability to mask up to 8 areas of the picture where Viewing is not desired. Each zone can be independently programmed via the OSD OSD All camera functions are menu driven fo
Résumé du contenu de la page N° 12
OSD MENU TREE LENS ◆ DC EXPOSURE SLC ◆ SHUTTER ◆ AGC ◆ SLC ◆ S-WDR ◆ RETURN HLC WHITE BALANCE ◆ ATW ◆ AWB ◆ AWC-SET ◆ MANUAL ◆ INDOOR ◆ OUTDOOR DAY / NIGHT ◆ COLOR ◆ AUTO ◆ EXT ◆ B/W S-DNR ◆ ON ◆ OFF SPECIAL ◆ CAM TITLE ◆ D-EFFECT ◆ MOTION ◆ PRIVACY ◆ RETURN / END FREEZE MIRROR D-ZOOM GAMMA NEG.IMAGE ADJUST ◆ SHARPNESS ◆ BLUE ◆ RED ◆ RETURN / END RESET ◆ FACTORY ◆ RETURN / END EXIT 12
Résumé du contenu de la page N° 13
OSD MENU DETAILS 1. EXPOSURE [OPTION : SHUTTER / AGC / SLC / S-WDR / RETURN] - SHUTTER 1/60, FLK, 1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000 - AGC (Low / Middle / High) Adjusts value of AGC gain and increases the GAIN level to brighten the picture. (noise / distortion may develop) -SLC * SLC : Back Light Compensation * HLC : High Light Compensation - S-WDR (Digital Wide Dynamic Range) To distinguish a subject in both bright and dark areas. * INDOOR : Activate S-WDR for Indoor use. * OUTD
Résumé du contenu de la page N° 14
OSD MENU DETAILS 3. DAY / NIGHT [OPTION : COLOR / BW / AUTO] - COLOR : Full time color mode - BW : Full time black & white mode - AUTO: Automatically detect color or black/white * DELAY : Set Delay time to switch Color to B/W. * S-LEVEL : Set Start Level of luminance that you define. * E-LEVEL : Set End Level of luminance that you define . *** Only certified technicians should be allowed to this feature. 4. S-DNR [OPTION : ON / OFF] - Reduces noise/distortion on the screen. Increasing the DNR l
Résumé du contenu de la page N° 15
OSD MENU DETAILS 6. SPECIAL – D-EFFECT [OPTION : FREEZE / MIRROR / D-ZOOM / GAMMA / NEG.IMAGE] - FREEZE: Freezes the current scene for detailed viewing. - MIRROR – ROTATE, V-FLIP, MIRROR - D-ZOOM : Digital zoom of 1 ~32X. - GAMMA : 0.45 is fixed. Do not adjust it unless certified technician. - NET. IMAGE : Change colors off like film. 7.SPECIAL - MOTION [OPTION : ON / OFF] - To transmit a alert signal when it detects motion of an object on the screen. 4 Areas can be selectable. 8. SPECIAL - PR
Résumé du contenu de la page N° 16
TROUBLESHOOTING If you have trouble operating your camera, refer to the following Problem Solution Nothing appears on ● Check that the power cord and line connection the screen. between the camera and monitor are correct ● Check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the ● Is the lens stained with dirt? Clean your lens with soft, clean cloth. screen is dim. ● Set the monitor for the proper conditions. ● If the camera is exposed to too strong
Résumé du contenu de la page N° 17
TROUBLESHOOTING Problem Solution The color of the ● Check that you have properly set the picture is not ‘ WHITE BALANCE ’ menu proper. The image on the ● Is the camera facing to direct sunlight or fluorescent screen flickers. lighting? Change the camera position. 17
Résumé du contenu de la page N° 18
LED PATTERN 3.7-10mm FF lens 18 Mini IR LEDs (80’ Range) 18
Résumé du contenu de la page N° 19
SPECIFICATIONS ITEM VLB11SCSFF Power Source 12VDC Only Power Consumption 600mA (DC) Image Sensor 1/3”, SONY SUPER HAD CCD, 410,000 pixels Total Pixels 811(H) x 508(V) , 1/3” CCD Effective Pixels 768(H) x 494(V) , 1/3” CCD LENS TYPE Focus Free Lens 3.7~10mm Maximum Aperture Ratio 1 : 1.3 ~2.0 Scanning System 2 : 1 Interlaced 525 Lines / 60 Fields / 30 Frames Synchronization Internal Video Output 1.0V [p-p] Composite, 75 Ω Resolution 550 TV Line Gain Control AGC-L, AGC-M, AGC-H, OFF select
Résumé du contenu de la page N° 20
DIMENSIONS * FRONT VIEW * SIDE VIEW 20
