Résumé du contenu de la page N° 1
ENG
ENG FRC SPA-M JAP POR-B
SCC-B5367
SCC-B5369
SCC-B5367S
SCC-B5369S
DIGITAL COLOR DOME
CAMERA
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsungsecurity.com
Résumé du contenu de la page N° 2
Safety information 6. CAUTION 7. RISK OF ELECTRIC SHOCK. DO NOT OPEN 8. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 9. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. 10 This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the li
Résumé du contenu de la page N° 3
ENG Safety information 6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers fi lled with water on top of the camera. Doing so may cause personal injury due to fi re, electric shock, or falling objects. 7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fi re or electric shock. 8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the s
Résumé du contenu de la page N° 4
Safety information FCC Statement W This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1. 1) This device may not cause harmful interference, and 2. 2) This device must accept any interference received including interference that may cause undesired operation. 3. 4. Caution 5. This equipment has been tested and found to comply with the limits for a Class A digital device, pursu- ant to part 15 of FCC Rules. These limits are designed to provid
Résumé du contenu de la page N° 5
ENG Important Safety Instructions WARNING 1. Read these instructions. 2. Keep these instructions. n. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. - ul 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including e amplifi ers) that produce heat. 9. Do not defeat the safety pu
Résumé du contenu de la page N° 6
Contents Introduction F Features 7 ❖ Product & Accessories 8 Part Names and Functions 9 ❖ Installation Before installation 12 ❖ Installation procedure 12 Adjusting the camera direction 14 ❖ How to use OSD Menu Using Icons in the Menu 15 Main Menu 15 ❖ Profi le 16 Camera Setup 18 Intelligence 26 ❖ Privacy Zone Setup 28 Other Set 30 ❖ System Information 30 Language 30 ❖ Specifi cations Specifi cations 32 ❖ ❖ 6 – DIGITAL COLOR DOME CAMERA
Résumé du contenu de la page N° 7
ENG Introduction FEATURES ❖ High Resolution � This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ VPS(Virtual Progressive Scan) � This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and fi le transfer via the Internet. ❖ Intelligent Motion Detection & Tracking � This is an intelligent function that automatically detects a motion of an obje
Résumé du contenu de la page N° 8
Introduction ❖ Output Signal Setting P � You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy, Horizontal/Vertical profi ling, and digital zooming. ❖ ❖ OSD(On Screen Display) Menu � OSD menu is provided to display the status of camera and to confi gure the functions interactively. ❖ Coaxial Cable Communication � This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the control signal. In ins
Résumé du contenu de la page N° 9
ENG EXT.D/N GND Introduction PART NAMES AND FUNCTIONS ❖ Components of your camera Test monitor output g. Lens Power connector a V ideo connector English – 9
Résumé du contenu de la page N° 10
Introduction ❖ No Name Brief description 1 Cover dome Covers the inner cover, lens, and main body to protect them. 2 Inner cover Covers the main body to protect it. Push a long thin screwdriver into its narrow spot and press it outward when you want to 3 Wing locker remove the inner cover. 4 Main body Includes a lens, a switch board, a PCB board, screws, and such. Used as a ceiling or wall fi xture. It is fi xed using three long tab screws provided in the 5 Mount bracket package. 6 Wiring Passag
Résumé du contenu de la page N° 11
ENG Introduction ❖ Setting switches g. th � SETUP Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears. (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value. (Up/Down) : By pressing this switch up or down, you can move up or down on the menu. : When you press this switch in the menu, the selected function is confi rmed. To enter a submenu,
Résumé du contenu de la page N° 12
Installation BEFORE INSTALLATION Before installing your camera, you have to read the following cautions. � You have to check whether the location (ceiling or wall) can bear fi ve times the weight of your camera. � Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fi re. � When installing your camera, don’t allow any person to approach the installation site. If you have any valuable things under the place, move t
Résumé du contenu de la page N° 13
ENG Installation Press the Locker button on the bottom of your camera and remove the Cover dome from the Main body using the other hand. The Main body and Inner cover will be exposed to you. To install and adjust your camera, you have to fi rst remove the Inner cover. To remove the Inner cover from the Main body, push a long thin screwdriver into the narrow spot of the Wing locker and press it outward to remove the cover. Remove the Mount bracket from the Main body by rotating the Main bod
Résumé du contenu de la page N° 14
Installation ADJUSTING THE CAMERA DIRECTION U When the camera is fi xed on the ceiling, you can adjust the camera viewing angle. You can rotate your camera � leftward or rightward (Panning), and can change the slope of your camera upward or downward (Tilting). In case of panning, the rotation limit of your camera is set to 355 degree (100 degree clockwise and 255 degree counterclockwise). The rotation is stopped by the Stopper inside of the camera. For panning control, fi rst � unfasten two scr
Résumé du contenu de la page N° 15
ENG How to use OSD Menu USING ICONS IN THE MENU MAIN MENU a � (EXIT) MAIN MENU Exits the menu setting. PROFILE Before you exits the menu setting, select SAVE to CAMERA SET ee INTELLIGENCE save your settings, or select QUIT to cancel. PRIVACY ZONE � (RET) he OTHER SET SYSTEM INFO Returns to the previous menu. LANGUAGE � (HOME) Returns to the main menu. � (SAVE) � PROFILE You can set a mode according to the camera Used to save your settings of MASK AREA, installation condition
Résumé du contenu de la page N° 16
How to use OSD Menu PROFILE PROFILE STANDARD D ITS BACKLIGHT DAY/NIGHT GAMING W CUSTOM In the PROFILE menu, you can confi gure the following camera settings at once. CAMERA SET Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Previous Sub-menus Menu VPS OFF ON OFF OFF OFF IRIS ALC ALC ALC ALC ALC ALC -- --- LENS DCDC DCDCDC LEVEL 0 0 0 0 0 BACKLIGHT OFF OFF OFF OFF OFF ❖ WDR - - WDR - - User setting User setting User setting User setting WEIGHT MID ❖ allowed allowed allowed allowed User sett
Résumé du contenu de la page N° 17
ENG How to use OSD Menu CAMERA SET Menu Previous STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Sub-menus Menu XDR MID MID MID MID MID DAY/NIGHT AUTO AUTO DAY AUTO DAY NIGHT -- --- BURST OFF ON OFF OFF OFF WHITE BAL DAY DAY/NIGHT DAY DAY/NIGHT DAY DAY -- --- MODE ATW2 ATW1 ATW1 ATW1 ATW1 RED 00 000 BLUE 0 0 0 0 0 NIGHT -- --- User setting User setting User setting BRIGHTNESS MID MID allowed allowed allowed MODE OFF ATW2 OFF ATW2 OFF User setting User setting User setting RED 0 0 allowed allowed allow
Résumé du contenu de la page N° 18
How to use OSD Menu Setup the general functions of zoom camera module. � CAMERA SETUP Use the switch to select a menu item. CAMERA SET ❖ CAMERA ID [OFF, ON] CAMERA ID OFF VPS OFF CAMERA ID IRIS ALC MOTION (F.FAST)--- ABCDEFGHIJKLMNOPQRSTUVWXYZ0 DNR MID 123456789 :?-+*()/ SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS OFF XDR MID SP SP LOCATION CAMERA-1.................. ........................... DAY/NIGHT AUTO WHITE BAL The CAMERA ID menu is used for you to
Résumé du contenu de la page N° 19
ENG How to use OSD Menu e. � ALC (Automatic Light Control) If you use an ordinary camera in a scene with an intensive backlight, the object will be ① If you press the SETUP switch with an ALC- displayed dark on the monitor affected by the based sub menu selected, you will see the backlight. To solve this problem, you can use appropriate screen. the BLC(Back Light Compensation) function ALC to improve the sharpness of the image in such a high contrast scene. LEVEL [00]----I---- BACKLIGHT
Résumé du contenu de la page N° 20
How to use OSD Menu ❖ AGC AGC FIX [OFF, VERY LOW, LOW, MID, HIGH, VERY LEVEL [01] HIGH, USER, FIX] The AGC (Auto Gain Control) menu is used to ❖ set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value. If OFF or FIX mode is selected in the SENS-UP If you press the SETUP switch with a FIX sub menu, you can specify the
