Résumé du contenu de la page N° 1
COLOR DOME CAMERA
INSTRUCTIONS
TK-C553
(B)
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No. TK-C553
Serial No.
SC96896H-001
1
Résumé du contenu de la page N° 2
IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid clean- ers or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 6. Do not use this appliance near water - for example, near a bat
Résumé du contenu de la page N° 3
13. Follow all warnings and instructions marked on the appliance. 14. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 15. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance. 16. Do not attempt to service this appliance yourself as opening or removing covers may expose you t
Résumé du contenu de la page N° 4
Safety Precautions Due to design modifications, data given in this FOR USA AND CANADA instruction book are subject to possible change without prior notice. CAUTION RISK OF ELECTRIC SHOCK WARNING: DO NOT OPEN TO REDUCE THE RISK OF FIRE OR CAUTION:TO REDUCE THE RISK OF ELECTRIC ELECTRIC SHOCK, DO NOT SHOCK. DO NOT REMOVE COVER (OR EXPOSE THIS APPLIANCE TO RAIN BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO OR MOISTURE. QUALIFIED SERVICE PERSONNEL. AVERTISSEMENT: The lightning flash wis
Résumé du contenu de la page N° 5
Thank you for purchasing this product. (These instrustions are for TK-C553U and TK-C553E) CONTENTS Features ...............................................................................................................................6 Operating Precautions .........................................................................................................6 Safety Precautions...............................................................................................................7 Con
Résumé du contenu de la page N° 6
Features Operating Precautions ● To save energy, when it is not being used Color Dome Camera with integrated turn the system’s power off. variable-focal-length lens and camera. ● This camera has been designed for indoor Backlight compensation function use. It cannot be used outdoors. provided. Enables improvement of video ● This camera has been designed image shot with backlit conditions. exclusively to be hung from the ceiling.It Employment of TTL automatic tracking may malfunction if it
Résumé du contenu de la page N° 7
Safety Precautions ● If a high-intensity object (such as a lamp) • Installation of this unit requires expertise. is shot, the image on the screen may have Please contact your dealer for details. vertical lines (smear) or blur (blooming) at • The ceiling to mount the TK-C553 has to its periphery. This is a characteristic of the be strong enough to support ten times the CCD, and is not a defect. weight of this product. ● Resolution decreases as the digital zoom If the ceiling is not strong enough,
Résumé du contenu de la page N° 8
Controls, Connectors and Indicators Camera Body Body Surface View when the dome cover is removed. 1 MONITOR 2 NOT USED NOT USED INT L/L OFF ON TERMINATION LOCK SET LEFT AWC UP RIGHT DOWN 7 3 6 4 5 1 MONITOR terminal (RCA pin) 5 Operation buttons For connecting a monitor when determin- LEFT/RIGHT/UP/DOWN ing camera angle, etc. (High impedance) Used to move the cursor on the SETUP 2 Camera head MENU screens and for changing set values. 3 Horizontal LOCK screw AWC When adjusting the camera angles
Résumé du contenu de la page N° 9
7 DIP switch Video synchronization selector switch Switches the synchronization method of the camera image. INT: Internal synchronization L/L: The camera’s vertical synchroniza- tion is matched with the frequency of the AC 24 V line power supply. When switching between multiple cam- eras using a switcher, selecting the LL mode and adjusting the vertical phase can reduce the monitor sync distur- bances occurring when the camera im- age is switched. Control signal termination ON/OFF switch Thi
Résumé du contenu de la page N° 10
Controls, Connectors and Indicators Camera Body Body Underside (Condition with terminal board attached.) 15 11 12 13 13 10 14 9 8 13 8 Terminal board 11 DC 12 V / AC 24 V input terminals To connect the coaxial cable used as the To input DC 12 V or AC 24 V power. video signal cable, the power cable, The AC 24 V power supply should control signal cable, etc. conform to the following: ( See page 15) U-type: Class 2 only 9 Video output terminal E-type: Isolated power supply only Outputs composite
Résumé du contenu de la page N° 11
Ceiling Mount 17 16 16 17 19 16 16 17 20 18 16 Mounting holes (× 4) Use these holes to attach the ceiling mount to the ceiling. 17 Guide holes for mounting camera (× 3) Guide holes for mounting the camera. 13 The camera body mounting guides are inserted into these holes. 18 Camera clamping screw To hold the camera in place, be sure to use this screw to lock the camera clamp 4 . 19 Camera positioning alignment mark Positioning mark for when the camera body is attached. 20 Drop prevention wire ho
Résumé du contenu de la page N° 12
SYSTEM System with Remote Control Unit RM-P2580 System with up to 8 cameras. (Six position settings available for each camera.) COLOR DOME CAMERA TK-C553 Control signal cable CAMERA 1 Video signal cable CAMERA ID:01 AC24V TERMINATION:OFF Power cable COLOR DOME CAMERA TK-C553 CAMERA 2 CAMERA ID:02 AC24V TERMINATION:OFF COLOR DOME CAMERA TK-C553 CAMERA 8 MONITOR AC24V Time lapse VCR CAMERA ID:08 CAM SW SR-L910E TERMINATION:ON REC STOP/EJECT CHECK REC VIDEO CASSETTE RECORDER OPERATE OUT PAUSE/ OPE.
Résumé du contenu de la page N° 13
DC 12 V or AC 24 V Lug plates power cable To DC 12 V or AC 24 V power supply Control signal cable RX+ C A TX+ To Remote Control Unit (RM-P2580) RX– D B TX– To Remote Control Unit (RM-P2580) Video signal cable Terminal board • Turn OFF the power supply to all equipment to be used before making connections. • Read the Instruction Manual for each piece of equipment to be used before making connections. • The control signal cable cannot be used for loop connection. Connecting the control signal ca
Résumé du contenu de la page N° 14
SYSTEM System with Remote Control Unit RM-P2580 • Settings on the FUNCTION menu are Settings performed using the operation buttons CAMERA FACE on the RM-P2580. They cannot be made using the operation buttons on the camera body. • Make settings on other menus as MONITOR required. MEMO INT LL NOT USED NOT USED L/L INT OFF ON OFF ON TERMINATION LOCK When operating a system using the RM- LEFT AWC UP RIGHT SET DOWN P2580, several cameras (up to 16) can be TERMINATION connected and used on one contr
Résumé du contenu de la page N° 15
INSTALLATION Connections to Camera Terminal Board • Turn OFF the power supply to all components before making connections. Connections to Terminal Board Remove the terminal board Remove the terminal board cover and con- cover by flipping it up while nect the video signal cable (coaxial cable) pushing its top to the left. (× 1). Connect the DC 12 V or AC 24 V power cables (× 2). In a system where the Remote Control Unit (RM-P2580), etc. is used, connect the con- trol signal cables (× 4). DC 1
Résumé du contenu de la page N° 16
INSTALLATION Connections to Camera Terminal Board (Continued) Video signal cables Connect the coaxial cables to the video Polyethylene Meshed wire signal output terminals. Treat the tips of Core the coaxial cables as shown on the left conductor before connection. 12mm 6mm Note Fold the meshed wire back. Use the 3C-2V or 5C-2V video signal cable (coaxial cable). The 7C-2V cannot be used. Control signal cables These cables should be connected only Connect to the A TX+ when it is required to
Résumé du contenu de la page N° 17
Ceiling Installation 1. Make a hole (75 mm diameter) in the 1. ceiling for passing the connection cables, and attach the provided ceiling mount to the ceiling. Ceiling mount Coincide the center of the mount with bracket the hole (75 mm diameter) for passing the cables through the ceiling. Attach the ceiling mount to the ceiling using 4 screws. Pass the wired terminal board through the hole in the center of the ceiling mount and leave if hanging down. • Use M4 screws or bolts for attaching Screws
Résumé du contenu de la page N° 18
INSTALLATION Ceiling Installation (Continued) 4. Mount the camera body. 4. (2) Position alignment mark 1) Ensure that the camera clamping screw on the ceiling mount is loosened. 2) Align the camera position alignment (1) mark on the camera body with the camera position alignment mark on Camera clamping the ceiling mount and press the screw camera body straight against the (2) Camera position (2) mount. alignment mark Note Exercise caution when mounting so as not to pinch the drop prevention wire
Résumé du contenu de la page N° 19
Adjusting the Camera Angle Remove the dome cover. Rotate the dome cover counterclockwise and pull it off. Horizontal rotation (adjustable range: 90°) 1. Loosen the horizontal LOCK screw. Dome 2. Holding the both tilt lock screws, rotate cover horizontally. 3. Tighten the horizontal LOCK screw. Vertical rotation Camera head (adjustable range: 130°) 1. Loosen the tilt lock screws. 2. Holding the rotation levers, rotate MONITOR vertically. 3. Tighten the tilt lock screws. NOT USED NOT USED L/L
Résumé du contenu de la page N° 20
INSTALLATION Adjusting the Camera Angle (Continued) Attach the dome cover. Triangle mark 1. Align the notch in the dome cover with the triangle mark and push the cover 2. 2. onto the camera body. 2. Rotate the cover clockwise as far as it will go and is seated firmly. CAUTION Notch 1. Be sure that the dome cover is firmly at- tached. Improper attachment could result in the cover dropping down. 20
