Résumé du contenu de la page N° 1
TK-C215V4_EN.book Page 1 Wednesday, June 14, 2006 8:00 PM
DOME CAMERA
INSTRUCTIONS
TK-C215V4
(A)
For Customer Use:
Enter below the Serial No. which is located on the body.
Retain this information for future reference.
Model No. TK-C215V4
Serial No.
LST0420-001A
Résumé du contenu de la page N° 2
TK-C215V4_EN.book Page 2 Wednesday, June 14, 2006 8:00 PM Introduction Safety Precautions Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance wit
Résumé du contenu de la page N° 3
TK-C215V4_EN.book Page 3 Wednesday, June 14, 2006 8:00 PM I This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70. INFORMATION FOR USA Any Mention in this manual of Alarm inputs INFORMATION have not been evaluated by UL to be used for This equipment has been tested and found to Burglar Alarm Functionality. comply with the limits for a Class B digital Embedding of cameras in the ceiling may not device, pursuant to Part 15 of the FCC Rules. be al
Résumé du contenu de la page N° 4
TK-C215V4_EN.book Page 4 Wednesday, June 14, 2006 8:00 PM Introduction These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Résumé du contenu de la page N° 5
TK-C215V4_EN.book Page 5 Wednesday, June 14, 2006 8:00 PM Thank you for purchasing this product. (These instructions are for: TK-C215V4U.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained. Characteristics Realizing a High Picture Quality This camera realizes 540 TV lines and S/N50 dB by employing a highly sensitive CCD with 380,000 pixels and a high-resolution video processing circ
Résumé du contenu de la page N° 6
TK-C215V4_EN.book Page 6 Wednesday, June 14, 2006 8:00 PM Introduction Contents Introduction Safety Precautions ......................................... 2 Characteristics ...............................................5 Contents .........................................................6 Operating Precautions ................................... 7 Name of Parts ................................................ 8 Camera .......................................................8 Camera (Interior) .
Résumé du contenu de la page N° 7
TK-C215V4_EN.book Page 7 Wednesday, June 14, 2006 8:00 PM If the DAY/NIGHT switch is turned on, the mode changes automatically to black and Operating Precautions white in dark places. As the sensitivity increases, the image may look grainy and To save energy, when it is not being used turn white spots may appear. the system’s power off. When changing modes, bright portions of This camera has been designed for indoor image may be emphasized but this is not a use. It cannot be use
Résumé du contenu de la page N° 8
TK-C215V4_EN.book Page 8 Wednesday, June 14, 2006 8:00 PM Introduction Name of Parts Camera I H G A B F B C A B D E A Mounting hole (elliptical) x 4 E Inner Dome Use these when mounting the camera to the Before mounting the camera, remove it and electrical box. (A pg. 18) perform switch setting and image angle setting. (A pg. 14, 16) NOTE: F Wiring Hole When installing the camera onto the electric box, install it using the supplied ad
Résumé du contenu de la page N° 9
TK-C215V4_EN.book Page 9 Wednesday, June 14, 2006 8:00 PM Camera (Interior) The dome cover, inner dome and outer case are removed. Procedures for removal. (A pg. 14 AEmbedding the camera to the ceilingB, Step 3. to Step 5.) V Lens (A Next page) J Camera Unit (Rear) W U T O S R Q K P L O M N J Strap R Pan fastening Screw A plate to connect the camera unit and the Ensure to loosen the screw before setting. dome cover. Further tighten the screw to ensure that camera's shooting direction does n
Résumé du contenu de la page N° 10
TK-C215V4_EN.book Page 10 Wednesday, June 14, 2006 8:00 PM Introduction A [RESET/SPOT] RESET/SPOT button Setting the Lens and When this button is pressed, the value of the white balance or phase adjusted manually is Switches reset to the default value. ● When the 2 [SELECT] switch is set to Set the video setting switches on the camera unit WHT.BAL., the white balance is reset to the before mounting it. default value. To set the switches, use a fine-tipped When the switch is set to PHAS
Résumé du contenu de la page N° 11
TK-C215V4_EN.book Page 11 Wednesday, June 14, 2006 8:00 PM 4. [WHT.BAL.] ATW/MANUAL selection D [IRIS LEVEL] Iris level adjustment switch. For adjusting the level of the automatic For selecting whether to adjust the white aperture control lens. This adjustment only balance automatically or manually. needs to be made when required. Use this to When the setting is changed from manual to accommodate particular shooting conditions. ATW, the setting values in the manual mode To darken image: Co
Résumé du contenu de la page N° 12
TK-C215V4_EN.book Page 12 Wednesday, June 14, 2006 8:00 PM Installation and connection DC 12 V or AC 24 V power supply cable About Connection Cables Connect the DC 12 V or the AC 24 V power supply to the DC 12 V/AC 24 V terminals on the The maximum connection distance varies with terminal board. To prevent connection errors or a the type of cable used. Please refer carefully to cable disconnection, we recommend the use of the table for each cable during connection. lug plates for the co
Résumé du contenu de la page N° 13
TK-C215V4_EN.book Page 13 Wednesday, June 14, 2006 8:00 PM System diagram Mounting the Camera Getting Started CAMERA 1 Video signal CAUTION: Power ● When mounting the camera to the ceiling, ensure to wear safety glasses to protect the eye from any falling object. Video CAMERA 2 signal ● Attachment of a embedded cover in the ceiling Power (recess bracket) may be mandatory in certain regions. If this is so, ensure that the embedded cover
Résumé du contenu de la page N° 14
TK-C215V4_EN.book Page 14 Wednesday, June 14, 2006 8:00 PM Installation and connection 4. Remove the inner dome Mounting the Camera The inner dome is secured with claws (3 locations). Hold the inner dome and (continued) remove it from the claws. 5. Remove the outer case. Embedding the camera to the ceiling (This method does not require an outer case.) * Make use of a ceiling material with a thickness A Loosen the camera fastening screw with a between 9.5 mm to 22 mm. screwdriver B To remo
Résumé du contenu de la page N° 15
TK-C215V4_EN.book Page 15 Wednesday, June 14, 2006 8:00 PM Connecting Mounting 1. Attach the fall prevention wire to the 1. Align j with the shooting direction when camera, followed by attaching it to the mounting the camera. ceiling slab (Fall prevention wire is not included.) 2. Fasten the camera. (x3 locations) 2. Connect the video signal cable. (A pg. 12) A Press the screw head of the ceiling mount Lower the cover and connect the connectors. bracket all the way in using a cross Up
Résumé du contenu de la page N° 16
TK-C215V4_EN.book Page 16 Wednesday, June 14, 2006 8:00 PM Installation and connection 6. Loosen the pan fastening screw. Mounting the Camera CAUTION: (continued) ● Moving the lens unit without loosening the pan fastening screw may damage the lens unit. When mounting the camera directly to the ceiling or on the wall 7. Set the switches for video images. When mounting to a wall, replace areas indicated ( A pg. 10) as “ceiling” in the procedu
Résumé du contenu de la page N° 17
TK-C215V4_EN.book Page 17 Wednesday, June 14, 2006 8:00 PM Mounting 1. Align the position mark of the fastened outer case with that of the camera unit. NOTE: When doing so, be careful not to catch the Outer case cables in the outer case. mounting screws 1. Less than 4 mm 2. Turn the camera unit in the clockwise direction. T When doing so, ensure that the X mark is visible. (See illustration below) 3. Fasten the camera by tightening th
Résumé du contenu de la page N° 18
TK-C215V4_EN.book Page 18 Wednesday, June 14, 2006 8:00 PM Installation and connection Mount by allowing the cable to exit from Mounting the Camera the side (continued) When mounting the camera to the ceiling or a wall, it is possible to guide the cable from the side without opening any holes. When mounting the camera to the The basic mounting method is identical to steps electrical box in AWhen mounting the camera directly to the NOTE:
Résumé du contenu de la page N° 19
TK-C215V4_EN.book Page 19 Wednesday, June 14, 2006 8:00 PM Adjusting Image Adjusting Images Pan : ± 175 Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and focus. * The power to the camera body must be ON Rotation : ± 175 when adjustments are performed. [MONITOR] Tilt : ± 80 Terminal Camera’s shooting direction mark
Résumé du contenu de la page N° 20
TK-C215V4_EN.book Page 20 Wednesday, June 14, 2006 8:00 PM Adjusting Image Adjusting brightness Adjusting Images (continued) This adjustment only needs to be made when required. Use this to accommodate particular shooting conditions. Adjusting the field angle/focus/ To darken image : Counterclockwise (L side) brightness To brighten image : Clockwise (H side) Upon determining the imaging direction, adjust NOTE: the field angle, focus and
