Résumé du contenu de la page N° 17
ON ON 123 4 567 8 12 3 45 678 ON ON 123 4 567 8 12 3 45 678 ON ON 123 4 567 8 12 3 45 678 ON ON 123 4 567 8 12 3 45 678 ON ON 1234 567 8 1 2345 678 2.3.2. Communication Protocol Setting st nd rd The 1 , 2 and 3 bits of the SW2 are used to set communication protocol. The factory default protocol is EVF. EVF - 1 PELCO-D PELCO-P TYPE-A SW2 Protocol Baud Rate PAL / NTSC Maching Resistance Notice: Please make sure the power is off before setting, and restart the speed dome to enable a new v
Résumé du contenu de la page N° 18
ON 123 45 6 78 ON 123 45 6 78 ON 123 45 67 8 2.3.4. Video Format Setting th The 6 bits of the SW2 on the PCB board are used to set the video format. The default video format depends on the factory setting. Please do not change it. NTSC PAL SW2 Protocol Baud Rate PAL / NTSC Maching Resistance Notice: Please make sure the power is off before setting, and restart the speed dome to enable a new value after changing. 2-17
Résumé du contenu de la page N° 19
2.4. Rack and Speed Dome Installation 2.4.1. Installation Requirements 1. Installation should be handled by a qualified service agent and should comply with all local regulations. Service personnel should expect potential problems such as surface strength, surface material, falling objects, outer breaches, building vibration or other similar conditions. 2. Check for all necessary materials, and ensure if the selected installation location is suitable for the speed dome. 2.4.2. EPTZ1000
Résumé du contenu de la page N° 20
2. Thread the cable through the hole in the wall mount bracket, and screw in 4 M8 nuts for mounting the bracket. 3. Take off the housing from the packing, and take off the baseboard (4 bolts on it.) inside the housing. Thread the cable through the top of the housing. Fix the housing on the wall mount bracket, and screw in 3 M5 bolts (Hex) on the top of the bracket with the attached Hex Allen wrench to fix the housing. M5 Bolt Hex Allen wrench RELAY JP5 Video + Video - RS485 + RS485 - A
Résumé du contenu de la page N° 1
Speed Dome
EPTZ1000
USER MANUAL
Date: Mar 2009
Résumé du contenu de la page N° 2
Table of Contents 1. EPTZ1000OVERVIEW ...................................................... 1-3 1.1. Introduction .....................................................................................................1-3 1.2. Specifications ..................................................................................................1-5 1.3. Feature .............................................................................................................1-7 1.3.1. Hardware Over
Résumé du contenu de la page N° 3
2.5.3. Corner mount ................................................................................. 2-22 2.5.4. Multi-Function Keyboard Controller ........................................... 2-22 3. EPTZ1000CAMERA SETUP MENU ............................... 3-23 3.1. Structure of the Setup Menu......................................................................... 3-23 3.1.1. Camera Setup Menu ....................................................................... 3-24 4. EPTZ1000
Résumé du contenu de la page N° 4
1. EPTZ1000OVERVIEW 1.1. Introduction EPTZ1000, an intelligent high-speed dome camera is ready to secure your property with its omni-directional and exact monitoring. An 18X optical and 12X digital zoom combining with a high-performance chip makes captured images clear and vivid. The other powerful camera functions this type of speed dome equips with: PAL / NTSC image format suppose. Auto and fast focus increases the searching speed and precision. Auto Iris adjusts the monitoring imag
Résumé du contenu de la page N° 5
All of the features make the intelligent high-speed dome camera works for a wide range and demanding application such as banks, airports, stations, casinos, streets of cities, intelligent buildings, and etc. 1-4
Résumé du contenu de la page N° 6
1.2. Specifications Pickup Device 1/4'' SONY Type EXview HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec PAL: 625 TV lines, 50 fields/sec Picture Elements 768 x 494 ( NTSC ) , 752 x 582 ( PAL ) Horizontal Resolution 480 TVL Sensitivity 0.7 Lux/F=1.4 S/N Ratio (AGC OFF) Over 50dB Electronic Shutter 1~1/10,000 (s) Digital Slow Shutter Yes Shutter Selection Yes Lens Type 18x optical zoom , f=4.1 mm (wide) to 73.8mm (tele) , F1.4 to F3.0 Zoom Ratio
Résumé du contenu de la page N° 7
Preset Positions 192 positions 1－239 grade available,0.1º/s - 360º/s Running to Position Speed Dwell Time at Preset 1~239 second available Position Tour 16 groups Tour Point per Group 16 preset positions Fan & Heater Fan & Heater auto starts Position Accuracy ±0.1° Alarm 4 in 1 out with tour/position auto triggering Built-in Menu for Yes Functions Communication RS-485 Communication Speed 1200/2400/4800/9600 bps Built-in Protocols Auto, EVF, Plus-D, A-Type, Pelco-D, Pelco-P Addre
Résumé du contenu de la page N° 8
1.3. Feature 1.3.1. Hardware Overview EPTZ1000 Wall Mount Bracket M5 Bolt (Hex) x3 Base PCB board Control board Connection Bus Housing Power Cable Inner Housing BNC Cable RS485 Cable M3 Bolt x3 Mechanical Part Bulb Camera Module 1-7
Résumé du contenu de la page N° 9
1.3.2. Base Board The base board that is on the bottom of the housing connects to power cable, video cable, control cable, alarm cable, fan and heater (fan and heater are for EPTZ1000 only). In order to connect to cables, the board needs to be taken off, and put back after finishing connecting to all cables. The connectors of cable names are marked on the board in white text. The details of the alarm connector (JP5) are shown on the APPENDIX A. For EPTZ1000, JP1, JP3 and JP6 that are two-
Résumé du contenu de la page N° 10
ON 12 34 56 78 ON 12 34 56 78 CPU SW2 ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 SW1 1.4. EPTZ1000Connection 110V AC 24V AC POWER 24V AC / 3.5 A Adapter BNC Video Out 1.0Vpp ± 0.2V, 75 Ω RS485 Tx(+) RS485 Control Line RS485 Tx(-) EPTZ1000DN/ Alarm 1 EPTZ500DN Alarm 2 Alarm 3 4 ALARM INPUTS Alarm 4 GROUND ALARM OUTPUTS N.C. N.O. COM 1-9 BAUD Protocol
Résumé du contenu de la page N° 11
1.5. EPTZ1000 Quick Operation Guide EPTZ1000and EKB500 (Keyboard) can work together by using factory default setting. You just need to connect cables by following the steps: 1. Connect the RS485 cable to EPTZ1000and a Keyboard (EKB500). 2. Connect a video cable from EPTZ1000to a monitor. 3. Connect the power to the EPTZ1000and a Keyboard (EKB500) . After the speed dome finishes the self-test mode, you can start to operate the speed dome via the keyboard. To operate the EPTZ1000: UP
Résumé du contenu de la page N° 12
2. EPTZ1000INSTALLATION 2.1. Packing List There are 3 boxes that are housing, bulb and mechanical part with a camera module, one wall mount bracket, one power adapter and one accessory packet in the package. The detail accessories list below: Housing x1 Bulb x1 Mechanical part with a camera module x1 Wall mount bracket x1 Adapter x1 Accessory packet Glove x2 M5 Hex Allen wrench x1 Pin connector x1 M5 screw (Hex) x3 for wall mount bracket fixing M3 screw x3 for bulb fixi
Résumé du contenu de la page N° 13
- Video Cable A BNC cable is used for connecting a speed dome to a DVR or a monitor. An amplifier may be needed if the video cable is too long. - Control Cable Basically, EPTZ1000uses a differential pair to connect to other devices by cascading. A cable that has low signal decline can be used as a control cable. - Alarm Cable An alarm cable is not included in the packing list. A suitable wire can be used as an alarm cable. 2.3. Initial Setup Initial setup includes dome address,
Résumé du contenu de la page N° 14
ON 12 34 567 8 ON 1 234 56 78 2.3.1. Address Setting The address code of the EPTZ1000should be set to correspond properly with a control device to control multiple dome cameras. The address codes are made up by the dipswitch SW1 (8 bits) on the PCB board. The 8 bits dipswitch indicates the binary 8 coded of the address, and there are 256 addresses can be selected (0 ~ 255, 2 = 256). It also means that there up to 256 dome cameras can cascade on the RS485 bus. The dipswitch setting and the
Résumé du contenu de la page N° 15
Switch Address Sw Sw Switch i it tch ch Ad A Ad ddress d dr re es ss s S Sw Sw Sw wii i itch t t tch ch ch A Address Address Address ddress Sw Sw Sw Sw Swi i i i it t t t tch ch ch ch ch Addre Add Add Add Addr r r re e e es s s s ss s s s s ON ON ON ON 0 32 64 96 1234 5678 12 3456 78 1234 5678 1 23456 78 ON ON ON ON 1 33 65 97 1234 5678 12 3456 78 1234 5678 1 23456 78 ON ON ON ON 2 34 66 98 1234 5678 12 3456 78 1234 5678 1 23456 78 ON ON ON ON 3 35 67 99 1234 5678 12 3456 78 1234 5678 1 23456 78
Résumé du contenu de la page N° 16
Switch Address Sw Sw Switc itc itch h h Addres Addres Address s s Sw Sw Sw Switch it it itch ch ch Add Add Addre Addr r re e es s s ss s s s Sw Sw Sw Sw Swiitch itch itch itch tch A Address Address Address Address ddress ON ON ON ON 128 160 192 224 12345678 1 2345678 1234 5678 12345678 ON ON ON ON 129 161 193 225 12345678 1 2345678 1234 5678 12345678 ON ON ON ON 130 162 194 226 12345678 1 2345678 1234 5678 12345678 ON ON ON ON 131 163 195 227 12345678 1 2345678 1234 5678 12345678 ON ON ON ON 132
