Résumé du contenu de la page N° 1
METROLOGIC INSTRUMENTS, INC.
MS7100 Series Fixed Projection
Installation and User’s Guide
MLPN 2408
Printed in USA
October 1998
Laser Scanner
Résumé du contenu de la page N° 2
Locations : USA Corporate Headquarters Europe 82178 Puchheim b. South America Copyright ® ii respective companies. Products and brand names mentioned in this document are trademarks of their in the Copyright Act of 1976. consent, except by reviewer, who may quote brief passages in a review, or provided for be reproduced, transmitted, or stored in any form or by any means without prior written Instruments, Inc. All rights reserved. No part of this work may © 1998 by Metrologic metrolog@br.metrol
Résumé du contenu de la page N° 3
Table of Contents ................................................... 1 ......................................... 2 .................................................... 3 ............................................... 4 ............... 5 ..................... 6 .................................... 7 .................................................. 8 ............................................. 9 ......................................... 10 .............................................. 11 ..
Résumé du contenu de la page N° 4
27, 28 29-32 33-35 36, 37 38, 39 40, 41 iv Index Notices Appendix E Warranty and Disclaimer Appendix D Pin Assignments Appendix C Default Settings Appendix B Design Specifications Appendix A
Résumé du contenu de la page N° 5
o SCANNER INTERFACE 7100-41 7100-47 7100-67 7100-9 7100-11 1 Data editing Programmable depth of field 7 beeper tones Easy programming PowerLink compatible Fully automatic scanning operation Orbit offers a great deal of features to the consumer: IBM 46XX/RS-232 ready (IBM) OCIA ready (OCIA) RS-232 ready (OCIA) Keyboard Wedge ready (KBW) RS-232/Light Pen ready (KBW) scanner size. These features increase the scanning throughput without increasing the for added flexibility when scannin
Résumé du contenu de la page N° 6
! ! (MLPN45593/45591/45592) ! ! ! ! 19716) 2 at 1-800-ID-METRO or 1-800-436-3876. Customer Service Depart-ment items, contact the dealer, distributor or call Metrologic’s To order additional Other items may be ordered for the specific protocol being used. (MLPN connector on the other female end and a 6-pin mini DIN connector on one Adapter Cable with a 5-pin DIN male mini DIN male on the other (MLPN 19763) DIN female connector on one end and a 6-pin with a 5-pin Keyboard Wedge PowerLink Ca
Résumé du contenu de la page N° 7
Quick Start 1.) 2.) 3 priate bar codes. how to enter the program mode and to select the appro- Programming Guide (MLPN 2407) for instructions on the host system’s specific needs, refer to the MetroSelect default settings. To configure the MS7100 scanner to meet The scanner is shipped from the factory programmed with remain on for the duration of the beep). and the scanner will beep once. (the green LED will the red LED will turn on, then the green LED will flash Plug in the sca
Résumé du contenu de la page N° 8
Operational Test Keyboard Wedge Scanners: 1. 2. 3. RS-232, Light Pen, OCIA and 46xx scanners: 1. 2. 3. 4 (steady red LED and the green LED will flash once) Listen for a single beep that indicates the scanner is ready for use. voltage matches the AC outlet. Connect AC power to the transformer. Check the AC input requirements of the power supply to make sure the connector) to the PC. Connect the other end of the PowerLink cable (the 9-pin D-type jack. Connect the 10-pin modular plug of the Power
Résumé du contenu de la page N° 9
S E L V 1. 2. 3. 4. .) 5. . NOTE: 5 required for proper communication to occur. software driver and correct configuration setting are also guarantee that scanned information will appear at the PC. A Plugging the scanner into the serial port of the PC does not b. flash simultaneously. on. Then the scanner will beep once and the green LED will When the scanner first receives power, the red LED will turn a. Turn on the host system transformer. Connect AC power to the the equipment and shall be
Résumé du contenu de la page N° 10
Scanner Installation: Powered by Host Device 1. 2. 3. NOTE: a . b . 6 required for proper communication to occur. software driver and correct configuration setting are also guarantee that scanned information will appear at the PC. A Plugging the scanner into the serial port of the PC does not flash simultaneously. on. Then the scanner will beep once and the green LED will When the scanner first receives power, the red LED will turn Turn on the host system. host. Make the necessary PowerLink
Résumé du contenu de la page N° 11
S E L V 1. 2. 3. 4. 5. Manufacturer’s Recommendation: 7 would work on one computer and not another. the same current through the keyboard port, this explains why a scanner the operation of the scanner or the computer. Not all computers supply directly from the com-puter keyboard connector could interfere with MS7100-47 Keyboard Wedge applications. Powering the MS7100-47 Metrologic recommends the use of an external power supply with Power up the PC. transformer. the . Connect AC power to Ma
Résumé du contenu de la page N° 12
Green and Red LEDs: ú Orbit Face: þ o Output Window: º ü Cable Connection: The MS7100 scanner 8 Top View Side View cable connections. protocol PowerLink pages 5-7 for specific into the jack. Refer to 10-pin modular plug cable will connect its jack. The PowerLink has a 10-pin modular from this aperture. Laser light emits ing of the scan pattern. for variable position- vertically Tilts 30 indicators. Refer to pages
Résumé du contenu de la page N° 13
One Beep * successfully not Razzberry Tone Three Beeps - during operation *** Three Beeps - on power up 9 This is a failure indicator. Refer to failure modes page 10. figured the scanner. that the single configuration bar code has successfully con- pause then by a high tone and a low tone. This tells the user three times (the current selected tone), followed by a short When using one-code-programming, the scanner will beep scanning mode. beeps can also indicate a communications timeout
Résumé du contenu de la page N° 14
Failure Modes Flashing Red and One Razzberry Tone and Green and Two Razzberry Tones Continuous Razzberry Tone with both LEDs off Three Beeps - on power up *** 10 service center. the unit for repair at an authorized has failed. Return volatile memory that holds the scanner configuration If the scanner beeps 3 times on power up then, the non- center. unit for repair at an authorized service Return the berry tone, then the scanner has an electronic failure. If, upon power up
Résumé du contenu de la page N° 15
Steady Red Steady Red and Steady Green Steady Red and Steady Green, Red off 11 the host. This indicates the scanner may be waiting for communication from indicates that an invalid bar code has been scanned in this mode. This indicates the scanner is in program mode. A razzberry tone Flashing Green the data can be transmitted. accept the information, the scanner’s green LED will remain on until scanner when data is ready to be received.
Résumé du contenu de la page N° 16
Labels 12 labels: device is an LASERKLASSE 1 product. The following are examples of these The other label states the notes that the device is a Class IIa laser product. information such as the model number, date of manufacture, serial number and Each scanner has labels on the bottom of the unit. One label contains
Résumé du contenu de la page N° 17
Depth of Field Specifications (based on 100% UPC bar codes) 13 Close Depth of Field Optimal Depth of Field (default)
Résumé du contenu de la page N° 18
14 Far Depth of Field Normal Depth of Field
Résumé du contenu de la page N° 19
Depth of Field by Minimum Bar Code Element Width 15 Optimal Depth of Field (default)
Résumé du contenu de la page N° 20
16 Close Depth of Field
