Instruction d'utilisation HP (Hewlett-Packard) SCANJET 4070

Résumé du contenu de la page N° 1

Scanner Installation- HP Scanjet 4070 Photosmart.
Connect the scanner in the Order Shown:
1. Connect the USB cable to the scanner and to your computer.
2. Connect the cable that is already in the scanner, to its port on the back
of the scanner.
3. Connect the power supply to the scanner and plug it to a wall outlet.
Your computer will probably recognize the new hardware you have just installed
(the scanner) and will pop up a message Found new hardware.
The computer will look for a driver for the

Résumé du contenu de la page N° 2

Scanning Instructions. 1. Place the GuardCard/DriverLicence/SSC on the scanner: Open the small window on the top of the scanner. Place the GuardCard/DriverLicence/SSC on the scanning surface (image facing down). Try to place it as parallel as you can to the edges. 2. Opening the program: Double click the HP Director Icon on your desktop. (If there is no icon on desktop click start programs HP HP Director) Choose the left upper Icon Scan Picture. A window called hp scanning will appear. Please

Résumé du contenu de la page N° 3

Go to scan new scan and wait for a new preview image. From here go back to stage 3. Cropping the Image correctly. You can always click no -and just start from the first stage later. 4. Viewing After you clicked no more scanning- HP Image Zone will open up automatically so you can view what you have just scanned. With this viewing program you can also: Rename picture: Double click on the picture name below the picture (for exemple-scan0001) and type any name that you wish (for exemple-Smith_Driv