Résumé du contenu de la page N° 1
IS4910, IS4911
Area Imaging Non-Decode Engine
Integration Guide
Résumé du contenu de la page N° 2
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein: nor for incidental or consequential damages
Résumé du contenu de la page N° 3
Table of Contents Introduction Product Overview ..............................................................................................................................................1 Models and Accessories ...................................................................................................................................2 Components of the IS4910 / IS4911 Non-Decode Engine................................................................................3 Labels......
Résumé du contenu de la page N° 4
Depth of Field vs. Bar Code Element IS4910 .............................................................................................................................................................20 IS4911 .............................................................................................................................................................21 Design Specifications Operational.........................................................................................
Résumé du contenu de la page N° 5
Introduction Product Overview The IS4910 series of non-decode miniature area imaging engines is designed for integration into customer ® OEM devices. When integrated with a host processor and decoding software from Omniplanar , the engine can be used to capture images for decoding 1D and 2D bar codes in addition to OCR fonts. The compact engine has several models available to accommodate all types of mounting requirements. All model types provide two blind holes for self-tapping screw
Résumé du contenu de la page N° 6
Models and Accessories Model Description Non-Decode Area Imaging Engine -00 Mounting option: • two blind holes for self-tapping screws Non-Decode Engine Mounting options: IS4910 -01 • two blind holes for self-tapping hardware or • two through holes located on tabs that extend from two sides of the engine's IS4911 chassis Non-Decode Engine Mounting options: -02 • two blind holes for self-tapping hardware • threaded inserts located on tabs that extend from two sides of
Résumé du contenu de la page N° 7
Components of the IS4910 / IS4811 Non-Decode Engine Item No. Description Item Location 1 Targeting 2 Area Illumination 3 Camera Imager 4 FirstFlash Aperture Figure 1. IS4910-00 / IS4911-00 5 Mounting Points (see pages 6 - 7) Mounting Points Provided for 6 Self-Tapping Screws (see pages 5 - 7) 7 Keying Location (see pages 5 - 7) 8 Printed Circuit Boards 22-Pin, 0.50 mm (.020") Pitch 9 SlimStack™ Plug, Molex Figure 2. IS4910-01 / IS4910-02 (P/N 55560-0227)
Résumé du contenu de la page N° 8
Labels The engine’s serial number/model number label is located on the side of the engine. Figure 3. Serial Number Label 4
Résumé du contenu de la page N° 9
Mounting Specifications IS4910-00 / IS4911-00 Non-Decode Engine Dimensions The -00 engine model includes two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping screws. The mounting holes are located on the bottom of the unit with an additional keying location point for engine alignment. Warning: The limited warranty (on page 31) is void if the following guidelines are not adhered to when mounting the engine. When securing the engine with self-tapping screws: •
Résumé du contenu de la page N° 10
IS4910-01 / IS4911-01 Non-Decode Engine Dimensions The -01 engine model includes two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping screws. Two additional Ø .098" ± .002 [2.5 mm ±.05 mm] clearance holes are provided as a secondary mounting option. The clearance holes are located on tabs that extend from the sides of the engine's chassis. A keying location point is provided on the bottom of the engine to assist with alignment. Warning: The limited warranty (on
Résumé du contenu de la page N° 11
IS4910-02 / IS4911-02 Non-Decode Engine Dimensions The -02 engine model includes two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping screws. Two additional M2 x .4 threaded inserts are provided as a secondary mounting option. The threaded inserts are located on tabs that extend from the sides of the engine's chassis. A keying location point is provided on the bottom of the engine to assist with alignment. Warning: The limited warranty (on page 31) is void if t
Résumé du contenu de la page N° 12
Enclosure Specifications The imaging engine was specifically designed for integration into custom housings for OEM applications. The imaging engine’s performance will be adversely affected or permanently damaged when mounted in an unsuitable enclosure. Warning: The limited warranty (on page 31) is void if the following considerations are not adhered to when integrating the engine into a system. Electrostatic Discharge (ESD) Cautions All imaging engines are shipped in ESD protective
Résumé du contenu de la page N° 13
Output Window Properties An improperly placed window has the serious potential to reduce the imaging engine’s performance. Careful consideration must be made when designing the output window’s distance and angle relative to the imaging engine’s camera aperture. Follow these guidelines when designing the output window. • The output window material should have a spectral transmission of at least 85% from 580 nm to 680 nm and should block shorter wavelengths. • It should have a 60-4
Résumé du contenu de la page N° 14
Optical Clearance Specifications The window size and enclosure design must provide unobstructed clearance for the illumination and targeting areas shown below to avoid optical interference that decreases the engine's performance. IS4910 Figure 7. IS4910 Optical Clearance Specifications IS4911 Figure 8. IS4911 Optical Clearance Specifications Specifications are subject to change without notice. 10
Résumé du contenu de la page N° 15
System Considerations In order to ensure proper operation of the decode engine’s electrical system; care must be taken to ensure the following requirements are met. Power Supply Decoupling* The engine requires clean filtered power supplies for both the VLED and Vimager power rails. Special care must be taken for the Vimager line as this voltage is used to power the imaging sensor. The power line must be heavily decoupled to prevent noise from coupling into the engine, which can reduc
Résumé du contenu de la page N° 16
Theory of Operation Overview The IS4910 imaging engine series is specifically designed for integration into handheld portable data terminals or other OEM devices used for barcode scanning and/or OCR applications. Since the imaging engine functions like a digital camera, the engine is capable of digital image capture, document lift, and signature capture. With software integration, the non-decode engine will support decoding of all standard 1D & 2D barcodes, reading OCR. The compact
Résumé du contenu de la page N° 17
Figure 9. IS4910 / IS4911 System Architecture Honeywell Scanning and Mobility provides a Software Development Kit (P/N 46-00550) that will ease the functional integration of the IS4910 or IS4911 non-decode engine. The SDK includes all the necessary software components needed to enable an application developer to control and communicate with the engine, acquire images, and decode barcodes. Additional information about the Software Development Kit and its application programming in
Résumé du contenu de la page N° 18
Snapshot Mode In the Snapshot mode of operation, image acquisition begins on the rising edge of the Trigger signal. Image integration continues until the trigger line is brought low at which time the Image Data is output on the Camera bus. In this mode, the area illumination is coincident with the integration time and is activated on the rising edge of the Trigger signal. The illumination will remain on until the FirstFlash circuitry determines that sufficient light has reached the se
Résumé du contenu de la page N° 19
Snapshot Illumination Waveforms The following waveforms show how the illumination LEDs are controlled relative to the input signals (Trigger and Illum_On) during the snapshot mode. The Trigger signal determines when the illumination and image integrations begin. In addition, the duration of this signal determines the maximum integration and illumination time. The Illum_On signal can be used in conjunction with the Trigger signal to ensure a minimum amount of illumination. Example
Résumé du contenu de la page N° 20
Video Mode The Video Mode allows for streaming video from the CMOS imager. The main advantage in the mode is that the user has fine control over the exposure time. Fine control over the exposure time makes this mode well 2 suitable for high ambient light applications. The Video Mode is initiated through commands via the I C bus. During this mode of operation, the Trigger signal must be held low. If lighting is required, the Illumination LEDs can be controlled via the Illum_On control
