Résumé du contenu de la page N° 1
TM
Magellan 3200VSi
On-Counter Vertical Presentation Scanner
Product Reference Guide
Résumé du contenu de la page N° 2
Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scan- ning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusiv
Résumé du contenu de la page N° 3
Table of Contents Chapter 1. Getting Started............................................................................................................................................................... 1 About This Manual ...........................................................................................................................................................................................................1 Manual Conventions ....................................................
Résumé du contenu de la page N° 4
Host Echo ............................................................................................................................................................................................................48 Host Echo Quiet Interval ................................................................................................................................................................................49 Signal Voltage: Normal/TTL ....................................................
Résumé du contenu de la page N° 5
EAN-8 .................................................................................................................................................................................................................................. 96 Disable/Enable EAN-8 ...............................................................................................................................................................................................96 Check Digit Transmission ........................
Résumé du contenu de la page N° 6
Disable/Enable PDF 417 ...............................................................................................................................................................................134 Length Control ................................................................................................................................................................................................135 PDF 417 Length 1, Length 2 Programming Instructions ...................................
Résumé du contenu de la page N° 7
microSD Card Insertion/Removal Indication ....................................................................................................................................................185 Autorun File Processing ............................................................................................................................................................................................185 microSD Function Summary .................................................................
Résumé du contenu de la page N° 8
NOTES TM vi Magellan 3200VSi
Résumé du contenu de la page N° 9
Chapter 1 Getting Started TM The Magellan 3200VSi On-Counter Vertical Presentation Scanner is designed for small coun- ter retail checkout environments where there is a relatively high number of transactions with a fairly small number of items per transaction. The scanner has a reduced footprint, allowing more room for item merchandising of high margin impulse items clustered around the P.O.S. About This Manual This manual provides advanced user information, including connection, programming,
Résumé du contenu de la page N° 10
R U S - S 2 3 B 2 Getting Started Connecting the Scanner The scanner kit you ordered to match your interface should provide a compatible cable for your installation. Alternatively, if your scanner receives Power Off the Terminal (POT) it might be possible to connect using a cable from a previously existing installation (except for USB). If you wish to connect using an existing cable, but cannot use POT, a short adapter cable is available. Check with your technical support representative abou
Résumé du contenu de la page N° 11
Error Codes USB Connection — Connect the scanner to a USB port on the terminal/PC using the correct USB cable for the interface type you ordered. Reference Figure 1. USB installations may require a power connection via an approved A/C Adapter as shown in Figure 1b or Figure 1c. For example, this would be the case if the scanner is connected along with a number of other devices to a non-powered USB hub. NOTE IBM Connection — Connect the scanner to the IBM port on the terminal/PC using the cor- r
Résumé du contenu de la page N° 12
Getting Started Mount Installation Options for mounting the scanner to a wall or countertop include an L-Bracket or stackable Risers (straight or tilted). Figure 2 shows the scanner being seated in an L-Bracket. Figure 3 dem- onstrates the use of stackable Risers. Stackable Risers also require use of the L-Bracket in order to securely seat the scanner in the topmost riser. NOTE Figure 2. L-Bracket Mount 1 5 4 3 2 1. Scanner 2. L-Bracket 3. Wall Mounting Screws 4. Countertop Mounting Screws 5.
Résumé du contenu de la page N° 13
Mount Installation Figure 3. Using the Risers Two Risers stacked. Scanner and One Riser ab L-Bracket have been tilted on the top Riser. Wall Mount Attach the L-Bracket to the wall, securing it in the desired position with two screws through the two holes in the back face of the L-Bracket as shown in Figure 2. Recommendation: Use two Pan Head (8.2mm or 5/16” maximum head diameter) #8 screw with a thread profile that suits the mounting surface material in the wall. Countertop Mount If using
Résumé du contenu de la page N° 14
Getting Started LED and Beeper Indicators The scanner’s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner. The tables below list these indications. One exception to the behaviors listed in the tables is that the scanner’s functions are programmable, and may or may not be turned on. For example, certain indications, such as the power-up beep can be disabled using programming bar code labels. Green LED Indications LED INDICATION COMMENT INDI
Résumé du contenu de la page N° 15
LED and Beeper Indicators BEEPER FUNCTIONS BEEPER INDICATION COMMENT INDICATION The Power-On Beep indication is a configurable feature which can be enabled or disabled. When enabled, this beep Indi- Power On Beep Single beep cates the scanner has finished all its power up tests and is now ready for operation. The good read beep indication is configurable. Options Good Read Single beep include: Enable/disable, frequency, duration and volume. See Indication the Product Reference Guide (PRG) f
Résumé du contenu de la page N° 16
Getting Started Programming The scanner is typically factory-configured with a set of default features standard to the interface type you ordered. After scanning the interface bar code from the Interface Related Features sec- tion, you can select other options and customize your scanner through use of the instructions and programming bar codes available in that section and also the Data Editing and Symbologies chapters of this manual. Using the Programming Bar Codes This manual contains featu
Résumé du contenu de la page N° 17
Bar Code Mask Bar Code Mask Cut a hole in this page and remove it from the manual as indicated to create a sleeve through which bar codes (starting in the following section) can be individually viewed and scanned. It is important that only one bar code at a time be presented to the scanner. 1 2 3 1. Bar Code Mask Sheet 3. Manual (folded) 2. Bar Code Product Reference Guide 9
Résumé du contenu de la page N° 18
Getting Started Going Green Thank you for using the bar code mask on the opposite side of this page. This manual has been formatted to minimize the quantity of pages needed to provide all of the programming bar codes available for this product. TM 10 Magellan 3200VSi
Résumé du contenu de la page N° 19
Chapter 2 General Features Double Read Timeout for Linear Labels This Double Read Timeout feature sets a time limit that determines how much time must pass before reading the same linear label again (e.g. two identical items in succession). START / END PROGRAMMING bar codes 0.1 Second 0.2 Second 0.3 Second 0.4 Second 0.5 Second 0.6 Second DEFAULT Product Reference Guide 11
Résumé du contenu de la page N° 20
General Features Double Read Timeout for Linear Labels — cont. START / END PROGRAMMING bar code 0.7 Second 0.8 Second 0.9 Second 1 Second TM 12 Magellan 3200VSi
