Résumé du contenu de la page N° 1
TD-8817
ADSL2+ Ethernet/USB Modem Router
Rev: 3.0.0
1910010897
Résumé du contenu de la page N° 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2013 TP-LINK TECHNOLOGIES CO.,
Résumé du contenu de la page N° 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Résumé du contenu de la page N° 4
Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. This product can be used in the
Résumé du contenu de la page N° 5
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: ADSL2+ Ethernet/USB Modem Router Model No.: TD-8817 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 2004 / 108 / EC, Directives 2006 / 95 / EC, Directives 2011/65/EU The above product is in conformity with the following standards o
Résumé du contenu de la page N° 6
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction ........................................................................................ 2 1.1 Product Overview...................................................................................................... 2 1.2 Main Features ...........................................................................................................
Résumé du contenu de la page N° 7
4.5.6 CWMP ............................................................................................................................52 4.6 Maintenance............................................................................................................ 52 4.6.1 Administration.................................................................................................................53 4.6.2 Time Zone ..............................................................................
Résumé du contenu de la page N° 8
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Package Contents The following items should be found in your package: One TD-8817 ADSL2+ Ethernet/USB Modem Router One Power Adapter for TD-8817 ADSL2+ Ethernet/USB Modem Router Quick Installation Guide One RJ45 cable One USB cable Two RJ11 cables One ADSL splitter One Resource CD , including: This User Guide USB Driver Other Helpful Information Note: Make sure that the package contains the above items
Résumé du contenu de la page N° 9
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Chapter 1. Introduction Thank you for choosing the TD-8817 ADSL2+ Ethernet/USB Modem Router. 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. TD-8817 connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations can be networked and
Résumé du contenu de la page N° 10
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Built-in DHCP server. Built-in firewall, supports IP/MAC filter, Application filter and URL filter. Supports Virtual Server, DMZ host and IP Address Mapping. Supports Dynamic DNS, UPnP and Static Routing. Supports system log and flow Statistics. Supports firmware upgrade and Web management. 1.3 Conventions The Router or device mentioned in this User Guide stands for TD-8817 without any explanations. Parameters provided in
Résumé du contenu de la page N° 11
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs are located on the front panel, they indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication On The modem router is powered on. Power The modem router is off. Please ensure that the power Off adapter is connected correctly. On There is a device connected to this USB port. The modem router
Résumé du contenu de la page N° 12
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide configuration. You may need to check this part of information with your ISP and make sure everything have been input correctly. Refer to 4.1.1 Device Info and 4.3.1 Internet for more information. 2.2 The Back Panel Figure 2-2 ON/OFF: The switch for the power. POWER: The Power plug is where you will connect the power adapter. USB: Connect with your computer’s USB interface. LAN: Through the port, you can connect the modem ro
Résumé du contenu de la page N° 13
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Figure 2-3 Note: The diameter of the screw, 4mm
Résumé du contenu de la page N° 14
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Figure 2-4 7
Résumé du contenu de la page N° 15
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Chapter 3. Quick Installation Guide 3.1 TCP/IP Configuration The default IP address of the TD-8817 ADSL2+ Ethernet/USB Modem Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all the default values for description. Connect the local PC to the LAN port of the modem router. And then you can configure the IP address for your PC in the following way. Obt
Résumé du contenu de la page N° 16
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Figure 3-2 You can check it following the steps below: 1) Is the connection between your PC and the modem router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC correct? If the modem router's IP address is 192.168.1.1, your PC's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254. 3.2 USB Configuration If you use t
Résumé du contenu de la page N° 17
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Figure 3-3 Step 3: You will see Figure 3-4 as follow, please wait a moment. Figure 3-4 Step 4: After that, you will see Figure 3-5. Click Finish to complete the installation. 10
Résumé du contenu de la page N° 18
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Figure 3-5 Note: 1) All of the above settings are under windows XP. 2) If you want to pull out the USB device you must disconnect the network of USB first. 3) In the Vista operating system, maybe the “Unknown Device” screen will pop up when you insert the USB cable of the Router to a computer, please just unplug the USB cable and try again. 3.3 Login Once your host PC is properly configured, please proceed as follows to use the
Résumé du contenu de la page N° 19
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Figure 3-6 Step 1: Select the Quick Start tab, then click RUN WIZARD, and you will see Figure 3-7. Click the NEXT button. Figure 3-7 Step 2: Configure the time for the Router, and then click the NEXT button. Figure 3-8 Step 3: Select the connection type to connect to the ISP (We select PPPoE/PPPoA mode for example here), and then click the NEXT button. 12
Résumé du contenu de la page N° 20
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide Figure 3-9 Step 4: Configure the following options provided by your ISP: Username, Password, VPI, VCI and Connection Type. Then click NEXT. Figure 3-10 Step 5: Click NEXT to finish the Quick Start. Figure 3-11 13
