Résumé du contenu de la page N° 1
OperatiOn Manual
MODel tp7X
tile Saw
(electric MOtOr)
Revision #0 (03/04/11)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Résumé du contenu de la page N° 2
rO p pOSitiOn 65 w arning Engine exhaust and some of itsconstituents,andsomedustcreated by power sanding, sawing, grinding, drillingandotherconstructionactivities containschemicalsknowntotheState of California to cause cancer, birth defects and other reproductive harm. Someexamplesofthesechemicalsare: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber. Yourriskfromtheseexposuresvaries, dependingonhowoftenyoudothist
Résumé du contenu de la page N° 3
SilicOSiS/e r SpiraO t y r w arningS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drillingofmasonry,concrete,metaland Grinding/cutting/drillingofmasonry,concrete,metaland othermaterialswithsilicaintheircompositionmaygive other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basiccomponentofsand,quartz,brickclay,graniteand injury or illness, such as respiratory
Résumé du contenu de la page N° 4
t able Of cOntentS tp7X tile Saw Proposition 65 Warning ........................................... 2 Silicosis/Respiratory Warnings ................................ 3 Table Of Contents .................................................... 4 Safety Information ................................................ 6-9 Specifications ........................................................ 10 Dimensions ............................................................ 11 General Information .................
Résumé du contenu de la page N° 5
nOteS Tp7X TILe Sa W • opera TIon manuaL — rev. #0 (03/04/11) — page 5
Résumé du contenu de la page N° 6
Safety iO nf M r atiOn Do not operate or service the equipment before reading Potential hazards associated with the operation of this the entire manual. Safety precautions should be followed equipment will be referenced with hazard symbols which at all times when operating this equipment. may appear throughout this manual in conjunction with Failure to read and understand the safety safety messages. messages and operating instructions could result in injury to yourself and others. Symbol Saf
Résumé du contenu de la page N° 7
Safety iO nf M r atiOn generaL SaFeTy NOTICE CauTIon This equipment should only be operated by trained and qualifi ed personnel 18 years of age and older. never operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, Whenever necessary, replace nameplate, operation and hearing protection, steel-toed boots and other protective safety decals when they become diffi cult read. devices required by the job or city and state regulations.
Résumé du contenu de la page N° 8
Safety iO nf M r atiOn SaW SaFeTy CauTIon Danger never operate the saw without blade guards and covers in place. Exposure of never operate the equipment in an explosive atmosphere the diamond blade must not exceed 180 or near combustible materials. An explosion or fi re could degrees. result causing severe bodily harm or even death. Verify the motor start switch is set to the OFF position WarnIng before installing a blade. Accidental starting can cause severe injury aLWayS
Résumé du contenu de la page N° 9
Safety iO nf M r atiOn eLeCTrIC moTor SaFeTy LIFTIng SaFeTy NOTICE CauTIon Operate electric motor only at the specifi ed voltage never allow any person or animal to stand underneath indicated on the nameplate. the equipment while lifting. Do noT spray water onto electric motor. Some saws are very heavy and awkward to move around. Use proper heavy lifting procedures. aLWayS disconnect AC power plug from power source before moving saw, changing blade, or performing Do noT lift mach
Résumé du contenu de la page N° 10
SpecificatiOS n Table 1. Saw Specifications model TP7X Blade Capacity 7 in. (178 mm) Blade rpm 6000 arbor Size 5/8 in. (15.875 mm) Blade guard Cast Aluminum Blade Shaft Bearings Water-Cooled Cutting Head Cast Aluminum, Adjustable Aluminum with roller bearings, injected Conveyor Cart molded rubber pad, transportation lock Drive System T-belt max. Depth of Cut 1-3/4 in. (44.5 mm) Straight Cut 20 in. (508 mm) Diagonal Cut 14 in. (356 mm) x 14 in. (356 mm) Size Tile Water Tray ABS Water pump 115V,
Résumé du contenu de la page N° 11
DiMenSiOS n C B A Figure 1. Dimensions Table 3. Dimension reference Letter Dimensions A 31.9 in. (811 mm) B 19.6 in. (49-8 mm) C 20.4 in. (518 mm) Tp7X TILe Sa W • opera TIon manuaL — rev. #0 (03/04/11) — page 11
Résumé du contenu de la page N° 12
general infOM r atiOn The TP7X is a powerful, robust saw designed to aCCeSSorIeS/repLa CemenT p ar TS professionally handle large-sized cuts on ceramics, stone, If desired, the TP7X tile saw can be equipped with a support and masonry materials. A sturdy steel precision frame and stand. This stand is ideal when the saw needs to be placed easily removable ABS water tray provides overall durability on a secure reliable platform. and longevity. Fea TureS This saw is equipped with a trusted 1 H
Résumé du contenu de la page N° 13
O n teS Tp7X TILe Sa W • opera TIon manuaL — rev. #0 (03/04/11) — page 13
Résumé du contenu de la page N° 14
Saw cOMO p nentS 3 5 8 4 2 10 7 15 9 1 1 12 6 1 13 22 20 17 18 19 21 16 14 Figure 2. Saw Components page 14 — Tp7X TILe Sa W • opera TIon manuaL — rev. #0 (03/04/11)
Résumé du contenu de la page N° 15
Saw cOMO p nentS Figure 2 shows the location of the basic components of 12. Cutting Table — Place material to be cut on this rubber the TP7X saw. Listed below is a brief explanation of each padded table. For ease of cutting, this table has been component. placed on rails so that it can easily slide back and forth. 1. aC power Cord — Plug this cord into a 125 VAC receptacle 13. r uler Backstop — When cutting, place material when starting of the electric motor is required. against backstop. Us
Résumé du contenu de la page N° 16
electric MOO t r cOMO p nentS/Set-up 3. Slide water pump onto U-shaped bracket located at eLeCTrIC mo Tor ComponenTS the bottom of the frame. See Figure 6. Figure 3 shows the location of the components of the 4. Slide cutting head onto the post. Secure cutting head electric motor. to the shaft using provided flat washer, lock washer and 1 15 V AC, 60 Hz SINGLE -PHASE nut. Attach cutting depth control knob and washers to ELECTRIC MOT OR the cutting head through the slot located underneath t
Résumé du contenu de la page N° 17
Set-up 6. Insert the water pump power plug into the outlet receptacle on the electric motor conduit box as shown in Figure 7. ELECTRIC MOT OR CONDUIT BOX POWER PLUG ELECTRIC W A T ER PUMP AC RECEPT ACLE W A TER PUMP Figure 5. Support Stand Assembly Figure 7. Water Pump Power Connection ConneCTIng THe WaTer pump WarnIng Refer to Figure 6. Disconnect the pump before attempting to handle the 1. Place the pump into the middle of the water tray along pump. never operate pump without water in the
Résumé du contenu de la page N° 18
Set-up 3. Directional a rrow — Check to ensure that the blade is BLaDeS oriented properly on the spindle for sawing. Reference the WarnIng directional arrow on the blade and place it so the direction Failure to thoroughly inspect the blade for of rotation “downcuts” with the turn of the shaft. operational safety could result in damage to 4. Diamond Segment or rim — Ensure that there are the blades or the saw and may cause serious no cracks, dings, or missing portions of the diamond inj
Résumé du contenu de la page N° 19
Set-up 5. Loosen blade guard adjustment knob, lower the blade Blade Installation guard, and retighten the knob. Refer to Figure 9 and the following instructions for installing the blade. 6. Slightly loosen the cutting head adjustment knob, lower the cutting head so that the blade is 1/4" (6 mm) below 1. Loosen blade guard adjustment knob located at the the surface of the cutting table. Tighten the adjustment rear of the blade guard. Carefully raise the cutting knob firmly to hold the cutt
Résumé du contenu de la page N° 20
Set-up/Sawing guiDeS 4. Plug the free end of the extension cord into an AC power ConneCTIng THe po Wer receptacle. Whenever possible use a GFCI receptacle 1. Place the power ON/OFF switch (Figure 10) in the OFF (Figure 11) to reduce the risk of electrical shock. position (down). 2. Connect an extension cord of adequate current carrying capacity to the power plug on the electric motor. 3. maKe Cer TaIn that the correct size extension cord is used. Undersized wires will burn out motors.
