Résumé du contenu de la page N° 1
OPERATOR' MAN AL
T$
10 in. TABLE SAW
Model No.
315.284610
A
WARNING: To reduce the risk of injury, the
user must read and understand the operator's
manual before using this product.
Customer Help Line: 1-800-932-3188
Product distributed in the United States by Sears Brands Management Corporation
Hoffman Estates, IL 60179
Visit the Craftsman web page: www.sears.ca
988000-118
Save this manual for future reference
5-18-10 (REV:01)
Résumé du contenu de la page N° 2
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman tool fails due to a defect in material or workmanship within one year from the date of purchase. Call 1-800-4-MY-HOME ® to arrange for free repair. If this tool is used for commercial or rental purposes, this warranty will appl
Résumé du contenu de la page N° 3
[] ALWAYS WEAR SAFETY GLASSES WITH SIDE _l_ WARNING: Read and understand all instruc- SHIELDS. Everyday eyeglasses have only impact- tions. Failure to follow all instructions listed below, resistant lenses, they are NOT safety glasses. may result in electric shock, fire and/or serious [] SECURE WORK. Use clamps or a vise to hold work personal injury. when practical. It's safer than using your hand and frees both hands to operate tool. READ ALL INSTRUCTIONS [] DON'T OVERREACH. Keep proper footing
Résumé du contenu de la page N° 4
[] cleaning. Never use brake fluids, gasoline, petroleum- KEEP HANDS AWAY FROM CUTTING AREA. Keep based products, or any solvents to clean tool. hands away from blades. Do not reach underneath work or around or over the blade while blade is [] STAY ALERT AND EXERCISE CONTROL. Watch rotating. Do not attempt to remove cut material when what you are doing and use common sense. Do not blade is moving. operate tool when you are tired. Do not rush. [] BLADE COASTS AFTER BEING TURNED OFF. [] DO NOT USE
Résumé du contenu de la page N° 5
[] IF THE POWER SUPPLY CORD IS DAMAGED, it [] ALWAYS SECURE WORKfirmlyagainst theripfence must be replaced only by the manufacturer or by an ormitergauge.NEVER usetheripfenceduring the authorized service center to avoid risk. sameoperation asthemitergauge. [] AVOID AWKWARD OPERATIONS AND HAND [] WHEN MAKING NON=THROUGH RiP CUTS, always POSiTiONS where a sudden slip could cause your use a push stick, push block, and/or featherboard so hand to move into the cutting tool. your hands do not come wit
Résumé du contenu de la page N° 6
Someofthefollowing symbols maybeusedonthistool.Please studythemandlearntheirmeaning. Proper interpretation ofthesesymbols willallowyouto operate thetoolbetterandsafer. SYMBOL NAME DESIG NATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. To reduce the risk of injury, user must read and understand Read Operator's Manual @ operator's manual before using this product. Always wear eye protection marked to comply with ANSI Eye Protection 0 Z87.1. Failure to keep your hands a
Résumé du contenu de la page N° 7
Thefollowing signalwordsandmeanings areintended to explainthelevelsofriskassociated withthisproduct. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may CAUTION: result in minor or moderate injury. CAUTION: (Without Safety A
Résumé du contenu de la page N° 8
EXTENSION CORDS SPEED AND WIRING Use only 3-wire extension cords that have 3-prong The no-load speed of this tool is approximately 5,000 rpm. grounding plugs and 3-pole receptacles that accept the This speed is not constant and decreases under a load or tool's plug. When using a power tool at a considerable with lower voltage. For voltage, the wiring in a shop is as distance from the power source, use an extension cord important as the motor's horsepower rating. A line intend- heavy enough to ca
Résumé du contenu de la page N° 9
Anti=Kickback Pawls (flooring, radial arm, and table Push Blocks (jointer planers} saws} Device used to feed the workpiece over the jointer planer A device which, when properly installed and maintained, cutterhead during any operation. This aid helps keep the is designed to stop the workpiece from being kicked back operator's hands well away from the cutterhead. toward the front of the saw during a ripping operation. Push Blocks (flooring and table saws} Arbor Device used to hold the workpiece d
Résumé du contenu de la page N° 10
PRODUCT SPECiFiCATiONS Blade Arbor .............................................................. 5/8 in. Input ..................................................................... 15 Amps Blade Diameter .......................................................... 10 in. No Load Speed .................................... 5,000 r/min. (RPM) Blade Tilt ................................................................ 0° - 45° Cutting Depth at 0°......................................................
Résumé du contenu de la page N° 11
HEIGHT/BEVEL ADJUSTING HANDWHEEL- Located KNOWYOURTABLESAW on the front of the cabinet, use this handwheel to lower See Figure 2. and raise the blade for height adjustments or blade re- The safe use of this product requires an understanding of placement. This handwheel also makes the adjustment for the information on the tool and in this operator's manual bevel angles easy. as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all op- MIT
Résumé du contenu de la page N° 12
OPERATING COMPONENTS WARNING: ALWAYS remove the switch key when The upper portion of the blade projects up through the the tool is not in use and keep it in a safe place. In table and is surrounded by an insert called the throat the event of a power failure, turn the switch off ( O ) plate. The height of the blade is set with a handwheel on and remove the key. This action will prevent the tool the front of the cabinet. To accommodate wide panels, the from accidentally starting when power returns
Résumé du contenu de la page N° 13
BLADES ,_ WARNING: Do not use blades rated less than the For maximum performance, it is recommended that you speed of this tool. Failure to heed this warning could use the 24-tooth, 10 in. carbide-tipped combination blade result in personal injury. provided with your saw. Additional blade styles of the same high quality are available for specific operations such as ripping. Your local dealer can provide you with complete information. Kerr width must be within the limits stamped on the spreader/r
Résumé du contenu de la page N° 14
Thefollowing itemsareincluded withthetablesaw: 0 E A Fig.5 A. Anti-Kickback Pawls ................................................ 1 H. Screw ....................................................................... 2 B. BladeGuard ............................................................. 1 I. OpenEndWrench .................................................... 1 J. Closed EndWrench ................................................. 1 C. SwitchKey..................................................
Résumé du contenu de la page N° 15
The following items are included with the table saw leg stand: I F F Fig. 6 A. Lower Brace .............................................................. 2 R Carriage Bolt (1/4 - 20 x 1/2 in.) .............................. 16 B. Lower Side Brace ...................................................... 2 G. Carriage Bolt (1/4 - 20 x 1-3/8 in.)............................. 4 H Foot ........................................................................... 4 C. Upper Brace .........................
Résumé du contenu de la page N° 16
UNPACKING ,_ WARNING: Do not connect to power supply until This product requires assembly. assembly is complete. Failure to comply could result in accidental starting and possible serious personal [] Carefully lift saw from the carton and place it on a level injury. work surface. NOTE: This tool is heavy. To avoid back injury, keep A your knees bent and lift with your legs, not your back, WARNING: Do not lift the saw without help. Hold and get help when needed. it close to your body. Keep your k
Résumé du contenu de la page N° 17
TO ASSEMBLE THE LEG STAND MOUNTING THE TABLE SAW BASE ON THE LEG See Figure 7. STAND See Figure 8. Assembly is best done in the area where the saw will be used. If you are unsure about the description of any [] Take the following from a small hardware pack: part, refer to the drawing. If any parts are missing, delay 4 carriage bolts (1/4-20 x 1-3/8 in.) assembling until you have obtained the missing part(s). 4 hex nuts (1/4-20) [] Take the following from a small hardware pack: NOTE: This hardwar
Résumé du contenu de la page N° 18
TO INSTALL THE HANDLE TO INSTALL THE LOCKING LEVER See Figure 10. See Figure 9. [] Slide the locking lever over the exposed end of the rip [] Hold the nylon nut securely and turn the screw fence making certain the handle is inserted as far as counter- clockwise to remove the nut completely. possible. NOTE: Do not remove the screw from the handle. [] Align the holes in the rip fence and the holes in the [] Place the nylon nut into the recessed hole on the back lever. Secure using the screws. of t
Résumé du contenu de la page N° 19
TO CHANGE BETWEEN A SPREADER AND A RiViNG KNIFE _"-=-"_---_ _ RELEASE LEVER See Figure 12. \ (UNLOCKED) This saw is shipped with the spreader/riving knife placed in the non-through cutting or "down" position (riving knife position). NOTE: The spreader/riving knife must be placed in the ,( through cutting, or "up" position (spreader position), for all other cutting operations. [] Unplug the saw. To place in spreader position (or "up" position for all through cutting): [] Remove the throat plate.
Résumé du contenu de la page N° 20
TO CHECK SAW BLADE iNSTALLATiON TO INSTALL THE BLADE GUARD AND ANTI- See Figure 13. KICKBACK PAWLS See Figures 14- 16. CAUTION: To work properly, the saw blade teeth must point down toward the front of the saw. Failure WARNING: Replace dull or damaged anti-kickback to do so could cause damage to the saw blade, the pawls. Dull or damaged pawls may not stop a kick- saw, or the workpiece. back increasing the risk of serious personal injury. [] Unplug the saw. NOTE: Anti-kickback pawls should only b
