Résumé du contenu de la page N° 1
UDWC25 Accessory Camera User’s Manual
What’s in the Box
Weatherproof video camera Camera stand
AC adapter Antenna Extension cord
If any items are missing or damaged, contact our Customer
Care Line immediately. Never use damaged products!
Need Help? Get answers 24/7 at our website: www.uniden.com.
If You... Contact Uniden’s... Phone Number
Customer Care 817-858-2929 or
have a question or problem
Line* 800-297-1023
need a replacement part or accessory Parts Department* 800-554-3988
Acces
Résumé du contenu de la page N° 2
Important Safety Instructions! This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: ► This equipment is NOT waterproof. DO NOT expose it to rain or moisture. ► DO NOT immerse any part of the product in water. Do not
Résumé du contenu de la page N° 3
► Allow for proper ventilation when units are in use. Do not cover the camera or receiver with any object such as a blanket. Do not place it in a drawer or in any location which would muffle the sound or interfere with the normal flow of air. SAVE THESE INSTRUCTIONS! For best results: To avoid damage to your equipment, follow these simple precautions: ► Do not drop, puncture or disassemble any part of the equipment. There are no user- serviceable parts inside. ► Do not expose the equipment to
Résumé du contenu de la page N° 4
Getting Started Connecting the Power 1. Attach the antenna to the rear of the camera. 2. Connect one end of the AC adapter to the camera’s power input pigtail and the other end to a 120 volt AC (standard indoor) power outlet. (If necessary, connect the extension cord to the camera’s pigtail and connect the AC adapter to the extension cord.) 3. Make sure the Power status light turns on. If it doesn’t, try reconnecting the AC adapter, and make sure the power outlet isn’t controlled by a
Résumé du contenu de la page N° 5
What the lights mean Light State What it means On The camera is on. Power status Off The camera is off. Flashing The camera is in pairing mode. Link Orange The camera is connected to the receiver. status Off The camera is in standby. Mounting Mounting Camera Camera screw screw brace brace Using the Camera Stand You can mount the camera with the stand Mounting Mounting on the bottom (on a wall or table-top) or on post post the top (on the ceiling). When you are Post Post lock lock positio
Résumé du contenu de la page N° 6
2. Carefully slide the Flip the bracket upside Flip the bracket upside bracket off of 22 down and slide it back down and slide it back the camera and onto the camera. onto the camera. sun shield. 3. Rotate the Adjust the camera to Adjust the camera to bracket 180° 33 the desired angle the desired angle and slide it and tighten the bolts. and tighten the bolts. back onto the camera. 4. If necessary, adjust the Loosen the bolts Loosen the bolts 11 camera angle, and slide the mounting
Résumé du contenu de la page N° 7
Attach the camera Attach the camera Attach the camera T Tighten the brace against ighten the brace against 11 to the mounting to the mounting 22 the camera to the camera to screw and turn it screw and turn it secure it secure it to the desired to the desired in place. in place. direction. direction. 33 Loosen the Loosen the wingnut to wingnut to Adjust the post to Adjust the post to unlock the unlock the 44 mounting mounting the correct angle, the correct angle, post. post. then tighten
Résumé du contenu de la page N° 8
Pairing Cameras Before you can use the camera, you’ll to “introducing” or pair it to the receiver so they can communicate. You might also perform the pairing procedure if you are having trouble with a camera. 1. Make sure the camera is powered on. 2. On the receiver, select the channel you want to pair this camera to, and put the receiver into pairing mode. (This process is slightly different on each receiver. See the manual that came with your receiver for instructions.) 3. On the camera, p
Résumé du contenu de la page N° 9
Additional Information Product Specifications Radio Frequency Transceiver RF Frequency 2402 Mhz ~ 2483.5 Mhz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Data rate 2 Mbps Channel bandwidth 2 MHz Transmitting range 200 meters/600 feet in an open area (line of sight) Image Specification Output Image resolution 640 x 480 (VGA)/ 320 x 240 (QVGA) Image processing Motion JPEG Exposure Auto White balance Auto Camera Specifications Weight 240 g Dimensi
Résumé du contenu de la page N° 10
Recycling and Disposal Information ► Do not dispose of electronic devices or any of their components (especially batteries and LCD displays) in your municipal trash collection. ► Consult your local waste management authority or a recycling organization like Earth911.com to find an electronics recycling facility in your area. ► If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for recycling. FCC Compliance Information Part 15 Compliance
Résumé du contenu de la page N° 11
RF Exposure Information The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.9”) from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. IC Compliance Information Radio Equipment Notice The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may
Résumé du contenu de la page N° 12
any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit & return it to you without charge for parts, service, or any other cost (except shipping & h
