Résumé du contenu de la page N° 1
SA10085
User
Guide
Satellite
Radio
Receiver
Important: This manual contains important safety and operating information.
Please read and follow the instructions in this manual. Failure to do so could result
in personal injury, death, and/or damage to your Roady2 and/or to your vehicle.
Résumé du contenu de la page N° 2
FCC ID: RS2SA10085 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT: The FCC and FAA have not certified the Delphi XM Roady2 Satellite Radio Receiver for use in any aircraft (neither portable nor permanent installation). Therefore, Delphi cannot support this type
Résumé du contenu de la page N° 3
3 Welcome ® ™ Thank you for purchasing a Delphi XM Roady2 Satellite Radio Receiver. Your Roady2 gives you access to over 120 XM Satellite Radio channels of music, news, and information from coast-to-coast.* Your Roady2 must be used with the enclosed connecting devices (or other approved accessories) to ensure maximum performance and safety. *XM subscription required for reception. Not available in Alaska or Hawaii. Caution: Do not modify or alter wires or connections in any way. Shortening wires
Résumé du contenu de la page N° 4
4 About Roady Roady2 is the latest in the acclaimed line of portable devices from Delphi and XM Satellite Radio and represents the best in audio technology. The smallest and lightest satellite radio receiver currently available, Roady2 is always ready to go with you. Just plug it in and go! Roady2 now contains an integrated wireless FM modulator (that lets you play XM through an empty frequency on the FM dial of your car or home radio) for the ultimate in convenience, and a stock ticker that w
Résumé du contenu de la page N° 5
5 Contents Section 1 Getting Started: Activating Roady2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Section 2 Roady2 Receiver Roady2 Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Roady2 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Section 3 Basic Operations Turning Roady2 On and Off . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 6
Section 1 6 Getting Started: Activating Roady2 To quickly begin enjoying Delphi XM Satellite Radio, follow these simple steps: 1. Set up your Roady2 using the installation instructions in Section 5 of this guide (see page 17) or with the help of a professional installer. 2. Press the power button to turn your Roady2 on and verify that it is playing Channel 1, the XM Preview Channel. 3. Select Channel 0. The receiver’s eight-character XM Satellite Radio ID number will appear on the display. W
Résumé du contenu de la page N° 7
Section 2 7 Roady2 Receiver Roady2 Display Screen While tuned to an XM channel, the Roady2 default display contains information about that channel and the Roady2 settings. See figure 1. Signal-strength indicator Display mode Category search Direct/preset mode (Direct, Preset A, (zero to three bars) indicator indicator Preset B, or Preset C) Channel name and number Artist name Figure 1. Roady2 display. Roady2 Controls Control keys Category search Tuning Wheel (inset on corner Power button of uni
Résumé du contenu de la page N° 8
Section 2 8 The Roady2 unit has seven function buttons, a Tuning Wheel, and 10 number keys. Turns the Roady2 on or off. The display button toggles between four display options: display 1. Channel name, channel number, artist name 2. Channel name, channel number, song title 3. Artist name, song title 4. Artist name, stock ticker Press Memory to save artist name and song title information. Press memory and hold memory key to recall information (or access this informa- tion from “Memory Recall” in
Résumé du contenu de la page N° 9
Section 3 9 Basic Operations Turning Roady2 On and Off Press on the Roady2. When first turned on, the receiver will automatically tune in to the last channel listened to and recall the previous settings. Basic Channel Selection Select a channel by number 1. Make sure that Roady2 is in Direct Entry mode. “Direct” should appear in the preset/direct upper right corner of the display. If A, B, or C appears, press until the display says “Direct.” 2. Enter channel number using the
Résumé du contenu de la page N° 10
Section 3 10 3. Press and hold the number key corresponding to the preset you would like to set. The receiver will beep to indicate that the preset is registered. 4. When you first get Roady2, all presets go to Channel 1. Preview and select channels using the Tuning Wheel You can use your Roady2 to preview the XM channel lineup, see what is currently playing, and then decide if you want to leave your current channel. 1. Turn the Tuning Wheel repeatedly (hold to move quickly) to scrol
Résumé du contenu de la page N° 11
Section 3 11 Display Option 1 Display Option 2 Display Option 3 Display Option 4 Figure 3. Roady2 screen displays. Changing the Display display Pressing lets you change what is shown on your two-line Roady2 display during normal listening from among four options: • Display mode 1 (factory default): Shows the channel name and channel number on the first line and the artist name on the second line. • Display mode 2: Shows the channel name and number on the first line and shows the son
Résumé du contenu de la page N° 12
Section 4 12 Menu menu Press to enter the menu section of Roady2. Here, you can change each of the following options using the Tuning Wheel . Select the highlighted item by menu pressing the Tuning Wheel in. While in the menu section, acts as a “back” button, allowing you to back out of existing sections. Following are the settings that can be changed: FM Frequency (only available when FM modulator is turned on) Roady2’s internal FM modulator can be used to send the
Résumé du contenu de la page N° 13
Section 4 13 each available frequency until you have found an optimal frequency. In the rare circumstance that you cannot find an acceptable open frequency, change to a hard-wired FM modulator configuration using the separately available FM Modulator Direct Wiring Adaptor described in the Available Accessories section on page 29. Note that you may need to repeat this procedure if you travel to areas with different FM stations in order to ensure the most static-free performance. In order to opt
Résumé du contenu de la page N° 14
Section 4 14 Antenna Aiming When using the optional home kit, you can optimize the position of your home antenna using this screen. For optimal performance, your home anten- na should be positioned to maximize the satellite signal received by your Roady2. TuneSelect™ Using this function, you can program your Roady2 to alert you with a tone when a favorite song is playing on a channel other than the one you are listening to. 1. While the song is playing, press and hold the Tuning Wheel in
Résumé du contenu de la page N° 15
Section 4 15 Stock Ticker This feature lets you track your favorite stocks and indices by “Scroll” (default) or by “Pages”*, selectable in the “Display Mode” option of the “Stock Ticker” menu. You can enter up to 20 favorite stock symbols and indices, tracking the price and daily movement**. You can track any stock symbols and most indices listed on the NYSE, NASDAQ, or AMEX. This feature is first set up by selecting “Stock Ticker” in the menu and then selecting “Add Stocks.” The Tuning Wheel
Résumé du contenu de la page N° 16
Section 4 16 Auto-On Once you have installed your Roady2 and the power has been turned on using the power button , you will discover your Roady2 has been factory- set to be turned off and back on again using the ignition key in your vehicle. To change this factory-set condition and always power your Roady2 on and off with the power button , select the “Auto-On” feature in the menu and then select “Off.” Auto-Off You can set your radio to automatically shut off 60, 120, or 180 minutes
Résumé du contenu de la page N° 17
Section 5 17 Installation Roady2 Kit Set-up Your Roady2 Kit contains the following components: Car mount XM antenna 12V power adaptor Cassette audio adaptor Your kit also includes: • Car mount bracket • Extra adhesive pad • Surface preparation cleaning kit • Alcohol prep pad Cell phone mount Vent mount • Cable wrap adaptor ® • Adhesive-backed Velcro pads Figure 4. Roady2 Kit components. Hooking up your Roady2 Receiver Caution: Connect only appropriate input devices to the Roady2. Connecting
Résumé du contenu de la page N° 18
Section 5 18 Roady2 offers the listener Audio Quality Good Better Best an unprecedented variety Direct Connect:
of options for connecting to your vehicle’s radio. All Cassette Adaptor:
options provide excellent FM Modulator:
sound quality and stereo Wireless FM Modulator: separation. Direct Connect For vehicles with radio head-units equipped with auxiliary audio inputs, connecting the audio directly to the auxiliary inputs of the head-unit (in a limited number of vehicles and aftermarket he
Résumé du contenu de la page N° 19
Section 5 19 the XM audio signal wirelessly to the vehicle’s FM radio. This FM modulator is automatically turned on whenever the cassette adaptor (or other audio jack) is unplugged from the side of the Roady2. One of 12 different frequencies can be selected, as described on page 12. In order to ensure optimum perform- ance, the signal is broadcast to your car’s FM radio from both inside the Roady2, and from the included XM antenna. Roady2 Installation Your Roady2 can be installed as follows: 1.
Résumé du contenu de la page N° 20
Section 5 20 ® (a) Flat mount: Use the included Velcro pads and attach them to both the back of Roady2 and the identified flat surface in your vehicle. (b) Vent mount: Your Roady2 kit includes an optional vent mount that can be used in place of the more ® permanent Velcro or swivel mounts so you can easily move your Roady2 and mount from car to car. Assemble the mount by inserting the two clips into the main piece, clipping them onto the vent, and then positioning the pivoting kickstand Figur
