Résumé du contenu de la page N° 1
300 IEM Series
Instruction manual
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Contents Contents Important safety instructions ........................................................................................................................ 2 The evolution wireless series ew 300 IEM G3 ................................................................................................ 3 The frequency bank system ........................................................................................................................... 4 Product overviews ................
Résumé du contenu de la page N° 4
Important safety instructions Important safety instructions System • Read this instruction manual. • Keep this instruction manual. Always include this instruction manual when passing the products on to third parties. • Heed all warnings and follow all instructions in this instruction manual. • Only clean the products when they are not connected to the mains. Use a cloth for cleaning. • Only use attachments/accessories specified by Sennheiser. • When replacement parts are required, only use repla
Résumé du contenu de la page N° 5
The evolution wireless series ew 300 IEM G3 • Danger due to high volumes This product is also intended for professional use. Commercial use is subject to the safety- at-work regulations. Sennheiser, as the manufacturer, is therefore obliged to expressly point out possible health risks arising from use. This product is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the sound pressure corresponding to the maximum permissible volume which is by law (in some countries) allowed t
Résumé du contenu de la page N° 6
The frequency bank system The frequency bank system Transmitter and receiver are available in 6 UHF frequency ranges with 1,680 frequencies per frequency range: Range A: Range G: Range B: Range C: Range D: Range E: 516 – 558 566 – 608 626 – 668 734 – 776 780 – 822 823 – 865 Each frequency range (A–E, G) offers 26 frequency banks with up to 16 channels each: Channel 1 – frequency preset Channel 2 – frequency preset Frequency bank 1... 20 Channel 16 – frequency preset Channel 1 – freely selectable
Résumé du contenu de la page N° 7
Product overviews Product overviews Overview of the SR 300 IEM G3 transmitter PEAK B.Ch: 1. 1 ew300IEM Stereo Transmitter 0 -10 MHz 519.150 A -20 -30 EQ -40 Standard -18dB AF I AF II PUSH PUSH Stereo Transmitter SR 300 IEM IDENT NO 627925 FREQ Range-D 780-822 MHz SER NO 2518100155 IC 2099A-G3SREK 0682 DESIGNED AND MADE IN GERMANY ANT B Loop Out BAL +22dBu BAL MAX AF IN L(I) R(II) L(I) +22dBu MAX R(II) RF OUT A B Operating elements – front panel Operating elements –
Résumé du contenu de la page N° 8
Product overviews Overview of the displays of the SR 300 IEM G3 transmitter After switch-on, the transmitter displays the standard display. ew300IEM B.Ch: 1. 1 MHz 519.150 EQ Standard -18dB Display Meaning Audio level Modulation of the left (AF I) and right (AF = Audio Frequency) (AF II) audio channel with peak hold function When the displays show full deflection, the audio input level is excessively high. When the transmitter is overmodulated frequentl
Résumé du contenu de la page N° 9
Product overviews Overview of the EK 300 IEM G3 diversity receiver
On/off/volume control Charging contacts 3.5 mm stereo jack socket (PHONES), SET button lockable / rocker button (UP/DOWN) (the shield is used by antenna II) Battery compartment Antenna I Battery compartment cover Operation and battery status indicator, Battery compartment catches red LED lit = ON Infra-red interface flashing = LOW BATTT ESC button
RF signal indication, g
Résumé du contenu de la page N° 10
Product overviews Overview of the displays of the EK 300 IEM G3 diversity receiver After switch-on, the diversity receiver displays the standard display “Frequency/Name”. For further illustrations and examples of the different standard displays, refer to page 18. The standard display displays the operating states of the diversity receiver. The display backlighting is automatically reduced after approx. 20 seconds. 519.150 MHz ew300 IEM MUTE RF AF P Display Meaning RF level “RF” Diversity displ
Résumé du contenu de la page N° 11
Putting the devices into operation Putting the devices into operation Putting the SR 300 IEM G3 transmitter into operation When using more than one transmitter, we recommend connecting remote antennas and, if necessary, using Sennheiser antenna accessories. Fore more information, visit the ew G3 product page at www.sennheiser.com. Setting up the transmitter on a flat surface Place the transmitter on a flat, horizontal surface. Please note that the device feet can leave stains on delicate surface
Résumé du contenu de la page N° 12
Putting the devices into operation Mounting the transmitter into a 19” rack Do not fit the device feet when mounting the transmitter into a 19” rack. CAUTION! Risks when rack mounting the transmitter! When installing the device in a closed or multi-rack assembly, please consider that, during operation, the ambient temperature, the mechanical loading and the electrical potentials will be different from those of devices which are not mounted into a rack. Make sure that the ambient temperature wi
Résumé du contenu de la page N° 13
Putting the devices into operation Rack mounting two To mount two transmitters into a rack using the GA 3 rack adapter: transmitters Place the two transmitters side by side upside-down onto a flat surface: Secure the jointing plate to the transmitters using six recessed head screws (M 3x6). Secure the rack mount “ears” to the transmitters as described on page 9. To mount the antennas: Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner. For more information,
Résumé du contenu de la page N° 14
Putting the devices into operation Connecting devices to the input sockets Use a suitable cable to connect the output of an external device (e.g. a mixing console or an PUSH PUSH additional SR 300 IEM G3) to the input socket BAL AF IN L(I) and/or BAL AF IN R(II) (see also page 13). BAL AF IN Adjust the output level of your external device. L(I) +22dBu MAX R(II) Via the operating menu, adjust the transmitter’s input sensitivity. The input sensitivity is adjusted via the “Sensitivity” me
Résumé du contenu de la page N° 15
Putting the devices into operation Daisy chaining audio signals You can transmit the same audio signal (e.g. the sum of all audio signals) to several diversity receivers of a multi-channel system. To do so, you have to daisy chain this audio signal from one transmitter to the next via the output sockets LOOP OUT BAL L(I) or LOOP OUT BAL R(II) . The audio signal is then transmitted by all transmitters on one of the two audio channels L(I) or R(II). The second audio channel allows you to transm
Résumé du contenu de la page N° 16
Putting the devices into operation Putting the EK 300 IEM G3 diversity receiver into operation Inserting the batteries/accupack For powering the diversity receiver, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack. Open the battery compartment by pushing the two catches in the direction of the arrows and open the cover . Insert the two batteries or the accupack as shown above. Please observe correct polarity when inserting the batteries/accupa
Résumé du contenu de la page N° 17
Putting the devices into operation Attaching the diversity receiver to clothing You can use the belt clip to attach the diversity receiver to clothing (e.g. belt, waistband). The belt clip is detachable so that you can also attach the diversity receiver with the antenna pointing downwards. To do so, withdraw the belt clip from its fixing points and attach it the other way round. The belt clip is secured so that it cannot slide out of its fixing points accidentally. To detach the belt clip:
Résumé du contenu de la page N° 18
Using the devices Using the devices To establish a transmission link, proceed as follows: 1. Switch the transmitter on. 2. Switch the diversity receiver on. The transmission link is established. It is vital to observe the notes on frequency selection on page 27. If you cannot establish a transmission link between transmitter and receiver: Make sure that transmitter and receiver are set to the same frequency bank and to the same channel – the easiest way is to synchronize the devices (see page
Résumé du contenu de la page N° 19
Using the devices When in the operating menu, pressing the STANDBY button will cancel your entry (ESC function) and return you to the standard display. The STANDBY button is backlit in red both during operation and in standby mode. To completely switch the transmitter off: Disconnect the transmitter from the mains by unplugging the mains unit from the wall socket. The backlighting of the STANDBY button goes off. Switching the EK 300 IEM G3 diversity receiver on/off To switch the diversit
Résumé du contenu de la page N° 20
Using the devices Selecting a standard display on the diversity receiver ESC Press the ESC button to select a standard display. In stereo mode, you can alternatively press the rocker button. Contents of the display Selectable standard display “Frequency/Name” 519.150MHz with “Mute” display ew300 IEM MUTE RF AF P “Frequency/Limiter” B.CH 1.1 with display of the audio channels (Stereo/Focus) Lim: - 6dB P RF AF “Frequency/High Boost“ 519.150MHz with display of the audio channels (Stereo/Focus
