Instruction d'utilisation Integra CNP-1000

Résumé du contenu de la page N° 1

Using XM Satellite Radio
A warning against reverse engineering:
®
Listening to XM Satellite Radio
It is prohibited to, and you agree that you will not, copy,
(North American Models Only)
decompile, disassemble, reverse engineer, hack, manip-
ulate, or otherwise access and/or make available any
technology incorporated in receivers compatible with
Important XM Radio Information
the XM Satellite Radio system. Furthermore, the
XM Satellite Radio offers an extraordinary variety of
®
AMBE voice c

Résumé du contenu de la page N° 2

Press the [Setup] button. 5 / Enter The setup menu closes. Selecting XM Satellite Radio Tuner Setup Press the [Tuner] input selector 1 button repeatedly to select XM. Setting the Satellite Radio Mode If “CHECK XM TUNER” appears on Before you can listen to XM Satellite Radio, you must the display, make sure the XM Mini- set the Satellite Radio mode to XM. Tuner is connected properly. On the AV receiver, press the 1 [Setup] button. Signing Up for XM Satellite Radio The main menu appears onscre

Résumé du contenu de la page N° 3

■ Category Search Mode Selecting XM Radio Channels Press the [Receiver] button, fol- There are three ways to select XM radio channels: 1 lowed by the [Enter] button to • Channel Search mode: select any channel. select “Category Search” mode. • Category Search mode: select channels by category. • Direct tuning: enter channel number. Note: You cannot select Channel Search or Category Search mode while the Tuning Arrow indicators are flashing, as tuning is in progress. Use the Left and Right [

Résumé du contenu de la page N° 4

Selecting the Previous Channel: Tunig / To listen to the previously Enter Preset 1 selected XM channel, press the AV receiver [Return] button. Remote controller Return Memory Display Tuning Mode CH +/– Return Display Selecting XM Channels from the Front Panel: Press the [Tuning Mode] button 1 to select “Channel Search” or “Category Search” mode. Use the Preset [ ]/[ ] buttons 2 repeatedly to select a category. Use the Tuning Up and Down 3 [ ]/[ ] buttons to select a chan- nel. In Chann

Résumé du contenu de la page N° 5

Presetting XM Channels Displaying XM Radio Information You can store a combination of up to 40 of your favorite Press the [Display] button XM channels and AM/FM radio stations as presets. 1 repeatedly to cycle through the AV receiver available information. Tune into the XM channel that 1 you want to store as a preset. Press the [Memory] button. 2 The preset number flashes. Remote controller While the preset number is flash- 3 ing (about 8 seconds), use the The following information can be d

Résumé du contenu de la page N° 6

Use the Up and Down [ ]/[ ] Tuning / Enter 3 buttons to select “3. Satellite Radio,” and then press [Enter]. The Satellite Radio menu appears. 4-3. Satellite Radio XM Antenna Aiming Setup Satellite Terrestrial Positioning the XM Mini-Tuner System You can check the signal strength of the XM radio signal Adjust the position of the XM and adjust the position of the XM Mini-Tuner System Mini-Tuner Antenna so that the accordingly. SAT/TER signal strength bar is as long as possible. On the

Résumé du contenu de la page N° 7

contact XM Listener Care and explain the issue that XM Radio Messages you’re experiencing and the corrective actions The following messages may appear while using XM you’ve tried. radio. ❑ CHECK XM TUNER ❑ CHECK ANTENNA The AV receiver is having difficulty communicating The XM antenna is not properly connected to the with the XM Mini-Tuner module. Make sure the XM Mini-Tuner Dock. Check the connection. Check the Mini-Tuner is properly seated in the Mini-Tuner antenna cable for damage. Do